DAS-4 SG35 Smart Watch User Manual

DAS-4 SG35 Smart Watch

Product Introduction

The SG35 is a smartwatch that can be connected to your phone via Bluetooth. It can display time, track fitness activities, and receive notifications from your phone. It also has a dial-up answering function that allows you to make and receive calls.

Button Instructions

Charging Instruction: The SG35 uses magnetic force charging and supports 5V=1A mobile phone charger and computer USB interface. To charge the device, put the charging cable to the back of the device’s charging pins, and it will charge automatically. It usually takes 2 hours to fully charge. Do not use the watch when charging. Note that you should place the magnetic charger correctly at the pins. If the charger is not properly aligned with the pins, it will cause the circuit to burn.

Connection

The SG35 can connect to your phone by downloading the application FitCloud Pro. You can do this by scanning the QR code using any scanner or searching and downloading the app in the App Store or Google Play Store. Please note that Android supports 5.0 and above, IOS supports 10.0 and above, and Bluetooth hardware 5.0 and above.

Quick Connection Guide

Step 1: The first connection between your watch and your mobile phone.

1. Turn on the mobile phone’s Bluetooth.
2. Scan the QR code or search the FitCloud Pro APP in the App Store or Google Play Store.
3. Download and install the FitCloud Pro APP.
4. Enter the APP and accept all the necessary licenses.
5. Select the second TAB (the watch) and Add the device.
6. Select device NX3 with the highest signal.

Step 2: Turn ON the Bluetooth dial-up answering function.

1. Turn on the watch Bluetooth in the smartwatch.
2. Switch to your mobile phone’s Bluetooth list.
3. Search for the NX3 HT device and connect it.
4. The connection is successful. You are now able to make and receive calls.

Main Features

• Display time and date
• Track fitness activities
• Receive notifications from your phone
• Dial-up answering function to make and receive calls

Disclaimer

1. Please ensure that Bluetooth and mobile GPS are turned on. When searching for the device via Bluetooth, make sure that no other device is connected. When searching for the device via Bluetooth, keep a close distance between your mobile and smartwatch.
2. If the Bluetooth connection is unstable during operation, try restarting the watch and connecting it to the mobile again. Be sure to turn on the automatic start for the smartwatch application in the settings of your mobile phone. Also, turn off the battery optimization (without restrictions) for the specific application so that the continuous application-smartwatch communication is not interrupted.
3. If there is a problem with the watch or its use, please contact the store where you purchased it.
4. The measurements of the watch are for reference only and not for medical use. Please follow your doctor’s instructions and do not use the measurements to make your diagnosis.The watch can withstand accidental contact with water. However, it cannot be used for diving or being underwater for a long time. In addition, the watch should not come in contact with hot water, as steam can penetrate the seal and cause internal damage.
5. The company has the right to modify the contents of this user manual without prior notice. Some functions differ depending on the software they carry.

Introduction

Thank you for choosing our product! Please read the user manual in order to have a complete understanding on the smartwatch features and operation method. The functions in the user manual may be slightly different from the final product. Typos and inconsistencies in this manual will be corrected in a timely manner. If we have updates, this manual will change without notice. Our company reserves the right to revise the manual.

Package: One gift box, one user manual, one smart watch, and one USB charging cable.

Remark: This model is dustproof only.

Do NOT wear this product when showering or swimming at the sea. The water will surpass the proofing and there is a possibility of shorting the circuit. The warranty does not cover you in case of damage from the above reason.

Button Instructions

Charging instruction: this product adopts is using magnetic force charging. Supports 5V= 1A mobile phone charger and computer USB interface. Put the charging cable to the back of the device’s charging pins, it will charge automatically. It usually takes 2 hours to fully charge. Do not use the watch when charging.

Remark: You should place the magnetic charger correctly at the pins. If the charger is not properly aligned with the pins, it will cause the circuit to burn.

Connection

The watch can connect with your phone by downloading the application “FitCloud Pro”, using one of the methods below

1. Android / IOS: Scan the QR code using any scanner, to download the app “FitCloud Pro”.
2. Searching and downloading the APP in the App Store or Google Play Store.

Note: Android supports 5.0 and above, IOS supports 10.0 and above, and Bluetooth hardware 5.0 and above

Quick connection guide

Step 1: The first connection between your watch and your mobile phone.

• Turn on the mobile phone’s Bluetooth.
• Scan the QR code or search the “FitCloud Pro” APP in the APP Store or Google Play Store.
• Download and install the “FitCloud Pro” APP.
• Enter the APP and accept all the necessary licenses.
• Select the second TAB (the watch) and Add the device.
• Select the device “NX3” with the highest signal.

Step 2: Turn ON the Bluetooth dial-up answering function.

1. Turn on the watch Bluetooth in the smartwatch
2. Switch to your mobile phone’s Bluetooth list.
3. Search for the “NX3 HT” device and connect it.
4. The connection is successful. You are now able to make and receive calls.

Main Features

• Replace watch Dial: Long press the main page menu for 3 seconds to change the watch face, or download a watch face in the APP.
• Control Center: Slide down to enter the control center. There are: 1. Do Not Disturb mode, 2. Brightness Adjustment, 3. Settings, 4. Find My Phone, 5. Volume, 6. Voice Assistance
• Do Not Disturb: Mode Slide down to the control center and click the Do not disturb icon to confirm that do not disturb mode is on.
• Brightness Adjustment: Slide down to the control center and click the brightness adjustment icon to adjust the brightness of your device.
• Settings: Slide down to the control center and click the settings icon to enter the function setting.
• Find My Phone: Slide down to the control center, click the Find my Phone icon, and your phone will vibrate to alert you.
• Volume: Slide down to the control center, click the audio icon, and open audio mode.
• Voice Assistant: Slide down to the control center, click the voice assistant, click the button to enter voice, or long-press the function/back button for 3 seconds.
• Sport Data: Slide once to the left to the sports data page, view the sports data, and record steps, calories, and kilometers separately.
• Message: Slide up to the message bar to view a message.
• Heart Rate: Slide twice to the left to the heart rate page, start measuring, and show the data.
• Call Function: This function needs to be connected to audio Bluetooth. When entering the dial, you can enter the phone number and call as needed; long press on the keyboard 7 and 9 to enter *and #
• Sport Mode: Press the function/back button, enter the function page find the sports. Click into the sports mode and choose the sport you like.
• Weather: Press the function/back button, enter the function page find the weather, and click to check the weather.
• Music Control: Press the function/back button, enter the function page find music control, click it and enter to adjust Up and down songs, start/stop, and add or subtract volume.
• Blood Pressure: Press the function/back button, enter the function page find blood pressure, click and measure.
• Blood Oxygen: Press the function/back button, enter the function page find blood oxygen, click and measure.
• Other Functions: 1.Sleep 2. Stopwatch 3. Timer 4. Alarm Clock 5. Sedentary Reminder 6.Drink Water Reminder 7. Remote Camera (Launch from App) 8. Female Menstrual Cycle (Launch from App)

Please note: The device is not a medical device. Any values shown are for reference only.

What is NOT Included in the Warranty Terms?

WARRANTY

This warranty does not include:

• Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, loss of parts, tampering or attempted repair by a person not authorized by the distributor.
• Any product that has not been installed, operated or maintained in accordance with the manufacturer‘s instruction manual provided with the product. Any product that has been used for purposes other than the intended use.
• Any damage caused by improper power input or improper cable connection.

Disclaimer

1. Please ensure that Bluetooth and mobile GPS are turned on. When searching for the device via Bluetooth, make sure that no other device is connected. When searching for the device via Bluetooth, keep a close distance between your mobile and smartwatch.
2. If the Bluetooth connection is unstable during operation, try restarting the watch and connecting it to the mobile again. Be sure to turn on the automatic start for the smartwatch application, in the settings of your mobile phone. Also turn off the battery optimization (without restrictions) for the specific application, so that the continuous application-smartwatch communication is not interrupted.
3. If there is a problem with the watch or its use, please contact the store where you purchased it.
4. The measurements of the watch are for reference only and not for medical use. Please follow your doctor’s instructions and do not use the measurements to make your own diagnosis.
5. The watch can withstand accidental contact with water. However, it can not be used for diving or being underwater for a long time. In addition, the watch should not come in contact with hot water, as steam can penetrate the seal and cause internal damage.
6. The company has the right to modify the contents of this user manual without prior notice. Some functions differ depending on the software they carry.
7. CAUTION: Do not use a power adapter that gives more than 5v = 1A to charge the device. If you use a charger larger than 1A for charging, the circuit and/or battery may be damaged.
8. Once the watch is charging, disconnect the cable from the power supply to prevent a short circuit if it comes in contact with conducting objects.
9. Do not leave the peripherals and accessories in areas where the temperature is too high or too low. Otherwise, the device may malfunction.
10. Avoid hitting the device to reduce the risk of damage.
11. If you don’t use it for a long time, please turn it off and recharge it once every month.

Only dustproof only. Seawater is prohibited.

FAQ

1. What can I do if the smartwatch doesn’t appear on the list with available devices?
   First please check if the smartwatch has a battery (over 20%). Then place the smartwatch close to the mobile phone and try again. If this problem still exists, please turn OFF and ON the mobile’s Bluetooth and try again.

2. Why is heart rate not being measured?
   To make the measurement correctly, the watch must have good contact with your skin and the hand is not in motion.

3. Why is the watch not showing the messages?
   You must have the “Access to notifications” permission enabled. You need to check that the message also appears in the notification bar of your mobile. If it is not displayed, the message cannot be forwarded to the watch.

Caution: Consult your doctor before starting any new physical activity. Although the watch can measure your heart rate in real-time, it cannot be used for medical and diagnostic purposes.

The warranty terms that cover the product are mentioned in the details on the website.

www.das-4.com

References

• DAS.4 | Smartwatches - Wearables - Activity trackers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>