Toshiba SMART AIR CONDITIONER USER MANUAL
- June 9, 2024
- Toshiba
Table of Contents
Toshiba SMART AIR CONDITIONER USER MANUAL
IMPORTANT NOTE
Read the manual carefully before installing or connecting your air
conditioner. Make sure to save this manual for future reference.
CAUTION
-
This device complies with Part 15 of the FCC Rules and RSS 210 of Industry & Science Canada. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Only operate the device in accordance with the instructions supplied. This device complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC and IC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
-
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
We hereby declare that this AC is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
SPECIFICATION
- Model: OSK102
- Standard: IEEE 802.11 b/g/n
- Antenna Type: External omnidirectional Antenna Frequency: 2.4 GHz (wireless)
- Maximum Transmitted Power: 15 dBm Max
- Dimensions: 55 x 24 x 8 (mm)
- Operation Temperature: 0°C ~ 45°C / 32°F ~ 113°F.
- Operation Humidity: 10% ~ 85%
- Power Input: DC 5V/300 mA
PRECAUTIONS
- Supports operating systems: iOS 7+ or Android 4+.
- In the event of an OS update, there may be a delay between the update of the OS and a related software update during which your OS may or may not be supported until a new version is released. Your specific mobile phone or problems in your network may prevent the system from working and Toshiba will not be responsible for any problems that could be caused by incompatibility or network issues.
- This Smart AC only supports WPA-PSK/WPA2-PSK (recommended) encryption. Please check the Toshiba Lifestyle website, us.toshiba-lifestyle.com, for updated information.
- To ensure proper scanning of the QR code, your smartphone must have at least a 5-megapixel camera.
- Due to unstable network connectivity, requests may time out. If this happens, re-run the network configuration.
- Due to unstable network connectivity, commands may time out. If this happens, the smartphone app and the actual product may display conflicting information. The information displayed on the actual product is always the most accurate available. Refresh the app to re-sync.
NOTE
Toshiba will not be responsible for any problems that could be caused by
incompatibility or network issues, your wireless router, and your mobile
phone.
SYSTEM OVERVIEW
Devices required to use the Smart AC:
- Smart Phone with compatible iOS or Android system.
- Wireless Router
- Smart Air Conditioner
DOWNLOAD AND INSTALL THE APP
Scan to download the app
- You can also go to Google Play or App Store and search for the latest compatible app. For more information, please refer to the Toshiba Lifestyle website: us.toshiba-lifestyle.com.
NOTE
All the images in this manual are for reference only, your product and app may
look slightly different. The actual product and app instructions and
indications have to be considered.
CREATE YOUR ACCOUNT
- Make sure your smartphone is connected to your wireless router and your wireless router has a working internet connection.
- It is recommended to activate your account immediately to be able to recover your password by email.
- Press “Create Account”.
- Enter your email address and password.
- Press “Registration”.
- If you forget your password, press “Forgot password?” on the main menu and enter your email address. Then press “Send retrieve password email”.
NOTES
- Make sure your smartphone is able to connect to the wireless network which will be used.
- Make sure also that the device is not connecting to other networks in range.
SET UNIT TO ACCESS POINT MODE
Connect the unit to the power supply, press and hold VENT ANGLE /SWING (on
Portable AC) or WIFI/WIRELESS (on Window AC) buttons for 3-5 seconds. The unit
will enter Access Point mode and the display will show “AP”. Proceed to the
next step.
NOTE
On units that include a remote control with an “LED” button, you can also
use the remote controller by pressing the LED button 7 times.
NOTE
When the unit is in “AP” / Access Point mode, the remote controller is
inactive. It is necessary to finish the network configuration, turn the AC off
and on again, or wait for 8 minutes for the unit to leave “AP” mode
automatically.
NETWORK CONFIGURATION
- Log in with your account.
- Please press “+ Add Device” on the app’s “Home” screen.
Choose a network configuration method
- Scan QR Code method:
- For Android devices, please follow step 8.4 to complete the configuration.
- Setup Method:
- Please follow step 8.5 to complete the configuration.
For Android (Scan QR code method)
Press “Scan QR Code”.
- Scan the QR code found on the air conditioner.
- Select your preferred wireless network, enter your password, and press “OK”.
- Name your unit
- Setup Method.
- Select your AC type.
- Turn the air conditioner on, then wait for 5 seconds before continuing.
- Press and hold VENT ANGLE/ SWING (on Portable AC) or WIFI/WIRELESS (on Window AC) buttons for 3-5 seconds. The unit will enter Access Point mode and the display will show “AP”.
- Go to your phone’s wireless network settings, connect to the network named “net_ac_xxxx”, and use the password “12345678”.
- Return to the “Toshiba” App, select your preferred wireless network, and type in your password. Then press “Start Configuration”.
- The app will show you the progress. If there is a failure, please check your network settings and unit and try again.
- Name your unit.
NOTES
- When finishing the network configuration, the app will indicate success by displaying a message.
- In unstable network connections, the products may still appear on the app as “offline”. If this happens, wait for it to show up on the device list or turn the air conditioner’s power off. After 30 seconds, turn the unit back on and wait a few minutes before checking again. If the unit is still offline, try the pairing process again.
HOW TO USE THE APP
Log in and select your unit to control it from wherever you are from your smartphone.
USING THE APP
SPECIAL FUNCTIONS
Including Timer on, Timer off, Sleep curve, Check, Energy monitor, and Check body.
NOTE
Not all models display all functions. Please check your product’s user manual
for more details. If a function is not available, it will not be displayed on
the function list in the app.
Timer on / Timer off
With this function, you can manually select what time you would like the air
conditioner to turn on/off. Additionally, you can select which days you would
like the timer to apply to.
Customized Sleep Curve
With this function, you can customize your air conditioner’s settings for each
hour that you are asleep.
Self Diagnosis – “Check” Function
With this function, you can run a self-diagnosis. The app will show a report
on key items and their status.
Download pdf:Toshiba SMART AIR CONDITIONER USER MANUAL