LD SYSTEMS STINGER 8 Swivel Wall and Ceiling Mount User Manual
- June 9, 2024
- LD Systems
Table of Contents
USER´S MANUAL
STINGER® 8 / 10 / 28 G3 WMB
SWIVEL WALL & CEILING MOUNT FOR STINGER® G3 MODELS
SAFETY INFORMATION
- Please read these instructions carefully before you start installation and assembly.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Observe all safety warnings. Never remove safety warnings or other information from the equipment.
- Be attentive when mounting the product and protect yourself from injury.
- This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
- Do not modify this equipment.
- Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
- Plastic bags must be kept out of reach of children.
- If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-
DECLARATIONS_LD_SYSTEMS.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email
Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have
it recycled to promote sustainable economic activity.
LDEB82G3WMB (SUITABLE FOR LDEB82G3, LDEB82AG3)
LDEB102G3WMB (SUITABLE FOR LDEB102G3, LDEB102AG3)
LDEB282G3WMB (SUITABLE FOR LDEB282G3, LDEB282AG3)
Screw the U-bracket of the desired Stinger G3 speaker in a suitable position
to a load-bearing wall or ceiling (A). Use suitable screws and plugs etc. to
ensure secure mounting. Remove the M8 screws on the top and bottom of the
speaker and lift the speaker into the bracket so that the thread locations in
the speaker and the holes in the bracket are aligned. Use the supplied M8
screws and washers as shown in the figure below (B, place rubber washers
between the bracket and the speaker), adjust dispersion angle as desired and
tighten the screws with a suitable tool (C).
SPECIFICATIONS
| Model name: | LDEB82G3WMB |
|---|---|
| Type: | PA Loudspeaker Accessories |
| Part: | Wall/Ceiling Mount Bracket |
| Suitable for: | LDEB82G3, LDEB82AG3 |
| Material: | Steel |
| Surface: | Powder Coated |
| Colour: | Black |
| Max. Load | 12 kg |
| Dimensions (W x H x D): | 60 x 460 x 170mm |
| Weight: | 1.1 kg |
| Model name: | LDEB102G3WMB |
| Type: | PA Loudspeaker Accessories |
| Part: | Wall/Ceiling Mount Bracket |
| Suitable for: | LDEB102G3, LDEB102AG3 |
| Material: | Steel |
| Surface: | Powder Coated |
| Colour: | Black |
| Max. Load | 15 kg |
| Dimensions (W x H x D): | 60 x 535 x 170mm |
| Weight: | 1.2 kg |
| Model name: | LDEB282G3WMB |
| Type: | PA Loudspeaker Accessories |
| Part: | Wall/Ceiling Mount Bracket |
| Suitable for: | LDEB282G3, LDEB282AG3 |
| Material: | Steel |
| Surface: | Powder Coated |
| Colour: | Black |
| Max. Load | 22 kg |
| Dimensions (W x H x D): | 60 x 763 x 170mm |
| Weight: | 1.5 kg |
For further instructions, please check out the detailed online manual in the download area of this product at:: www.ld-systems.com.
Adam Hall GmbH · Adam-Hall-Str. 1·
61267 Neu-Ansbach · Germany
Tel.: (+49) 60 81 / 94190·
Fax: (+49) 60 81 / 94 19 1000·
email: mail@adamhall.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>