SwitchBot B08HR18MRH Bot and Remote User Manual
- June 10, 2024
- SwitchBot
Table of Contents
SwitchBot Remote
User Manual
Please read this user manual carefully before using your device.
Package Contents
List of Components
Getting Started
- Download the SwitchBot app via the Apple App Store or Google Play Store.
- Open our app and register a SwitchBot account or sign in directly if you already have one.
https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en
https://apps.apple.com/cn/app/switchbot/id1087374760
Open the battery cover, remove the plastic battery isolation tab, and you will see the indicator light start flashing. 
Close the battery cover and turn on Bluetooth on your phone. Open the SwitchBot app, tap “+” on the top right of the home page, find the Remote icon and select. Then follow the instructions and add your device.
Placement
After adding your Remote, you may place it anywhere.
Option 1: Place it on a table.
Option 2: Putitinto the Remote holder.
Peel off the tape liner on the back of the holder, stick it to a smooth
surface and press it for 30 seconds to ensure it is firmly attached. Then put
your Remote into the holder.
Option 3: Add alanyard to your Remote through the strap-hole for portable use. You may need to purchase a lanyard separately.
Pairing Remote
You can pair your Remote with SwitchBot devices like a Bot or a Curtain to
control them.
How to pair a Remote:
- When pairing, place your phone, Remote and the target device close to each other.
- Open the SwitchBot app, tap the Remote card on the home page, tap the Key icon below Key Settings, then your phone will start to scan nearby available devices. Select your target device and Set Remote actions for it.
Mapping Keys
The two keys on your Remote can be set individually to trigger actions of two
different devices. One key can only trigger one action.
For example, you can set the action of the concave key as closeing/opening
your Curtain, and the concave key as turning on/off your Bot.
Low Battery
When you see a red battery icon appear on the Remote card on the app home
page, you may need to replace the battery.
Resetting Factory Settings
Press and hold both keys, and you will see the indicator light starts
flashing. Hold the keys for 15 seconds and release when the light stops
flashing. Then your Remote will emit a beep sound and the indicator light
willlight up for 1.5 seconds. Now your remote has been reset to factory
settings.
Note: Since all previous settings of your remote will be deleted after resetting, you will need to pair your Remote again.
Specifications
Model: W0301700
Color: White
Material: ABS plastic with UV-resistant
coating
Size: 37.1x 43.1 x 13.4mm
(1.5%1.7x05in.)
Weight (with battery): 17.7 g (0.6 0z.)
Battery: CR2450
Network Connectivity:
Bluetooth Low Energy
Return & Refund Policy
This product has a one-year warranty which begins from the date of purchase.
Should the following situations occur, your warranty and/or your eligibility
for a return or refund may not be valid.
- Intended damage or abuse.
- Inappropriate storage (including dropping or soaking in water).
- Unauthorized modifying or repair of product.
- Natural wear of product.
- Natural disasters.
Contact & Support
Setup and Troubleshooting:
support.switch-bot.com
Support Email: support@wondertechlabs.com
Feedback: If you have any concerns or problems when using our products, please
send feedback via our app through the Profile > Feedback page.
CE/UKCA Warning
RF exposure information: The EIRP power of the device at maximal case is below
the exempt condition, 20 MW specified in EN 62479: 2010. RF exposure
assessment has been performed to prove that this unit will not generate the
harmful EM emission above the reference level as specified in
EC Council Recommendation(1999/519/EC).
CEDOC
Hereby, Woan Technology (Shenzhen) Co.,
Lid. declares that the radio equipment type W0301700 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: support.switch-
bot.com
UKCA DOC
Hereby, Woan Technology (Shenzhen)
Co, Lid. declares that the radio equipment type W0301700 is in compliance with
UK Radio Equipment
Regulations (SI 2017/1206). The full text of the UK declaration of conformity
is available at the following internet address: support.switch-
bot.com
This product can be used in EU member states and UK
Manufacturer: Woan Technology (Shenzhen) Co,, Lid.
Address: Room 1101, Qiancheng
Commercial Center, No. 5 Haicheng Road,
Mabu Community, Xixiang Subdistrict,
Bao’an District, Shenzhen, Guangdong,
PRChina, 518100
EU Importer Name: Amazon Services Europe
Importer Address: 38 Avenue John F
Kennedy, L-1855 Luxembourg
W] 2412 MH2 t0 2472 Mz
Operation temperature: —20 °C to 60 °C
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>