SMARTCOBY PD 30W Mobile Battery Type C Small Lightweight User Manual
- June 10, 2024
- SMARTCOBY
Table of Contents
SMARTCOBY PD 30W Mobile Battery Type C Small Lightweight
Founded in 2017 in Osaka, Japan, CIO Co., Ltd. is a manufacturing and sales
company focused on dealing with the latest gadgets and smartphone accessories.
With the concept of “Delivering the latest, most exciting gadgets”, the
company offers its products through its e-commerce site and physical stores.
We always pay attention to the latest technology and continuously strive to
develop products that increase the level of convenience for users. We offer
high quality products in accordance with
Japanese standards, but at the same time, we offer high cost performance as
only an overseas manufacturer can.
It is our pleasure to provide convenient gadgets to our customers.
Introduction
Thank you for your purchase.
Please read the “USER MANUAL” carefully before use and use it correctly.
Precautions
- Warning This is content that could lead to death or serious injury.
- Caution There is a possibility of serious injury or damage to property.
Warning
- Stop using this product immediately if it makes any noise, generates unusual heat, has an unusual odor, or contains a foreign objecl.
- Do not disassemble or modify this product in any way. It may cause a fire, electric shock or injury.
- Children should not use this product alone. Do not use this product within the reach of children
- Do not immerse the product in water or allow it to get wet.Do not touch the power Plua with a wet hand. Otherwise, it may cause heat generation, fire, fire, electric shock, or explosion.
- Please do not use, leave or store the product in a high temperature environment. Do not throw this product into fire
- Do not drop this product, place heavy obiects on it, or give it a strong shock. Failure to do so may result In electric shock, malfunctions or injuries.
- Plug the power cord into a household wall outlet when using. Failure to do so may result in fire or electric shock.
- This product should be used away from heat-generating equipment.
Caution
- Do not use this product for any purpose other than its intended use.
- Do not use this product near flammable oils, chemicals or flammable materials.
- This product is not waterproof. Use and store in a place where it will not be exposed to liquids.
- When using this product, insert the shape of the USB connector in the correct orientation. Unreasonable insertion may cause malfunction or injury
- When connecting a device to this product, be sure to follow the device’s precautions and manuals to use it correctly.
- Please handle with care as this product may become hot while it is being charged or used. Also, as the device is fully charged or the product is nearing full charge, it will return to normal temperature
- When charging with Power Delivery (PD), it is necessary to use a PD compatible device and a PD compatible cable.
- To charge with QuickCharge3.O (QC3.O), you need to use a QC3.O compatible device and a QC3.O compatible cable.
- Please note that we are not responsible for any damage, damage, failure, or data loss of the equipment connected using this product.
- When disposing of this product, dispose of it according to the instructions of each local government.
- Product specifications are subject to change without notice for improvement. Therefore, it may differ from the contents described in the manual
- If you do not use the product for a long time, charge and discharge it about once every three months to maintain the product life.
Accessories
- SMARTCOBY Pro 30W
- Charging Cable (USB-C to USB-C)
- User’s Manual
Specifications
- Model: SMARTCOBYPRO-30W
- Built in Battery . Lithium Ion
- Input (USB-C) : 5V.—.3A / 9V.-:-.2.22 A/ 121.’.-:: 1 .5A (PD3.O)
- Output (USB-C) : 5V=3A / 9V=3A / 12V=2.5A (PD3.O) / 2.7A (PPS/QC4+)
- Output (USB-A) : 4.5-5V—.5A / 3A/ 12V —.2.5A (QC3.O/SCP/S-VOOC)
- Size: Approx.77x56x26mm
- Weight: Approx. 183g
- Lifecycle: Approx.500times
- Time to Recharge: Approx. 2.2hrs
Supported Fast Charging Protocols
PPS/PD3.O/PD2.O/QC4+/QC3.O/QC2.O/SCP/S-VOOC
Names of Each Part
-
OUSB USB-C Input/Output Port
-
Remaining Power LED in %
Quick Charging Indicator -
Power Button (Turn off : Hold it for about 2 seconds)
-
USB-A Output Port
How to Use
-
How to Charge the Device
Use a USB-A or USB-C to connect SMARTCOBY Pro 30W to the device. If charging does not start automatically, press the power button on the side .- A device and a cable that support fast charging technology (PowerDelivery / QuickCharge) are required
- The remaining battery LED on the side of the product shows during fast charging
- Even for devices that support fast charging, depending on the model of the device being used, the quick charging indicator may not light up
-
Two Devices Simultaneous Charging
Use both USB-A and USB-C ports to connect the product to your device for charging. If charging does not start automatically, press the power button on the side of the product.- While using simultaneous charging, the divices cannot be quick charged.
- While using simultaneous charging, about 18W will be allocated to each device and charged
-
How to Charge by Using Pass Through
Connect the device you want to charge from the USB-A port, and connect USB wall charger for USB-C port.
While charging your device, SMARTCOBY Pro will be charged too. -
How to Charge by Using Pass Through
Connect the device you want to charge from the USB-A port, and connect USB wall charger for USB-C port.
While charging your device, SMARTCOBY Pro will be charged too.- While using pass through charging, fast charging and fast recharging will not work.
- Pass through charging takes more time to charge and recharge.
-
How to Recharge SMARTCOBY Pro
Use the included USB-C cable to connect to the USB-C port of this product and a USB charger.
After connecting to this product, the battery will be recharged to 100%.- While being quick recharged, the quick charging indicator will be lit on
- To recharge at up to 20W, a USB wall charger that supports 20W output is required. CIO products are recommended for USB chargers
Warranty
Thank you for purchasing CIO product. If the product has any defects such as
initial malfunction, please contact us before reviewing.
We will replace it as an initial malfuntion product.
In case of malfunction occurred within the warranty period or correct use, we
will also replace it.
Invoice/warranty or dealer’a receipt will become warranty so please keep it.
The product will be guaranteed for replacement with it.
Please note that we do not accept returns or refunds.
Please note that the warranty cannot be provided in the following cases.
-
Accident due to careless handling while using it.
(e.g. dropping,submerging and so on.) -
Failure due to any internal modification by the user.
-
Failure due to fire or water damage.
Support Information
Email address:
smartcoby@connectinternationalone.co.jp
Stay Updated with All the Latest News!
We will be posting information about our new crowdfunding project, new
products, and special discounts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>