SENA SP114 Headphone User Manual

SENA SP114 Headphone

Product Information

The ORCA1 is a wireless headset that can be connected to a mobile phone or another Bluetooth-enabled device. It features volume adjustment, music operation, mobile phone call-making and answering, mesh intercom on/off, and a configuration menu. The headset also has a battery check function and LED indicators for charging status.

Product Usage Instructions

Charging

• Connect the ORCA1 to a power source using the included USB cable. The red LED light will indicate that it is charging. When the headset is fully charged, the blue LED light will turn on.

Power On/Off

• To turn on the ORCA1, press and hold the center button and mesh button for 1 second. To turn it off, tap the center button and mesh button.

Volume Adjustment

• To increase the volume, press the (+) button. To decrease the volume, press the (-) button.

Battery Check

1. Press and hold the center button and mesh button for 1 second.
2. Search for Bluetooth devices on your mobile phone.
3. Select the ORCA1 in the list of detected devices on your mobile phone.
4. Enter 0000 for the PIN (some mobile phones may not ask for the PIN).

Operation

Music Operation

• To play or pause music, press the center button for 1 second.
• To go to the previous track, press the (-) button for 1 second.
• To go to the next track, press the (+) button for 1 second.

Mobile Phone Call Making and Answering

• To answer a call, tap the center button.
• To end a call, press the center button for 2 seconds.
• To voice dial, press the center button for 3 seconds.
• To speed dial, press the (+) button for 3 seconds.
• To reject a call, press the center button for 2 seconds.

Mesh Intercom On/Off

• To turn on mesh intercom, tap the mesh button. To turn it off, tap the mesh button again.

Product Setting

• To access the configuration menu, press and hold the center button for 10 seconds.

Troubleshooting

Factory Reset

If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset will automatically restore the default settings and turn off.

FCC Statement

The ORCA1 complies with FCC radiation exposure limits and must be used in accordance with specific operating instructions toensure RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. When equipped, the distance between antenna and one’s head surface is 15.2mm.

FCC Caution

Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

OVERVIEW

Charging

• Red LED: Charging
• Blue LED: Fully charged

Power On/Off

• Power On: Center Button and Mesh Button for 1 sec
• Power Off: Tap the Center Button and Mesh Button

Volume Adjustment

• (+) Button: Increase the volume
• (-) Button:  Decrease the volume

Battery Check

Mobile Phone Call Making and Answering

• Answering a call: Tap the Center Button
• Ending a call: Press the Center Button for 2 seconds.
• Voice dial: Press the Center Button for 3 seconds.
• Speed dial: Press the (+) Button for 3 seconds.
• Rejecting a call: Press the Center Button for 2 seconds.

Mesh Intercom On/Off

• Mesh Intercom On: Tap the Mesh Button.
• Mesh Intercom Off: Tap the Mesh Button.

Setting

• Configuration Menu: Press the Center Button for 10 seconds.

Troubleshooting

Factory Reset

If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antennae
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. When equipped, the distance between antenna and one’s head surface is 15.2mm.

FCC Caution

Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.

Industry Canada(IC) Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference.
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>