HAMPTON BAY T02822 LED Desk Lamp User Guide
- June 10, 2024
- HAMPTON BAY
Table of Contents
- HAMPTON BAY T02822 LED Desk Lamp
- Product Information
- Pre-Installation
- Planning Installation
- Package Contents
- Operation
- Care and Cleaning
- Troubleshooting
- Safety Information
- Safety Information
- Warranty
- Pre-Installation
- PACKAGE CONTENTS
- Operation
- Care and Cleaning
- Troubleshooting
- FCC STATEMENT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HAMPTON BAY T02822 LED Desk Lamp
Product Information
The T02822 is an LED Desk Lamp manufactured by Hampton Bay. It is designed to enhance your home with its elegant design and provide you with quality lighting for your work or study needs. The lamp has a sleek and modern design that can complement any interior decor style. It comes with a user manual that provides detailed instructions on how to install and use the product safely.
Product Usage Instructions
Pre-Installation
Before starting the installation process, ensure that you disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box. Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call Hampton Bay Customer Service Team at 1-855 -HD-HAMPTON.
Planning Installation
Plan the installation process before proceeding. Consult a qualified electrician if you have any electrical questions. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Package Contents
Ensure that all the components listed in the package contents are present before starting the installation process.
Operation
The LED Desk Lamp is easy to operate. Plug it into an outlet and turn it on using the switch located on the base of the lamp. The lamp provides bright and energy-efficient lighting that can be adjusted to your desired level of brightness.
Care and Cleaning
To ensure that your LED Desk Lamp stays in good condition, clean it regularly using a soft cloth. Do not use abrasive cleaners or solvents that may damage the surface of the lamp.
Troubleshooting
If you experience any issues with your LED Desk Lamp, refer to the troubleshooting section of the user manual. If the issue persists, please call Hampton Bay Customer Service Team at 1-855-HD-HAMPTON for assistance.
Safety Information
It is essential to follow the safety guidelines provided in the user manual to prevent accidents or damage to the product. Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. Consult a qualified electrician if you have any electrical questions. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through
the purchase of this light fixture. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Hampton Bay!
Safety Information
- Consult a qualified electrician if you have any electrical questions.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-855-HD-HAMPTON.
WARNING: Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be coÿlocated or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of three (3) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, setup, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
Operation
Operating the lamp
- Insert the plug into an electrical outlet.
- Use the touch switch on the lamp base of light fixture (A) to get the nightlight on, main light on, both on and both off. Also use it to adjust the brightness to meet your needs.
- Adjust the head with an integrated LED to position the light up and down.
WARNING: The adjustable angle is not too big. Do not over-rotate. An improper rotation may cause damage.
USB Charger
Lamp comes with USB output for mobile devices. Maximum output 10W 5VDC 2A.
Wireless Charger
Lamp comes with a wireless charger for charging compatible devices. Maximum
output 10W 5VDC 2A. To charge device place it on top of the wireless charging
pad embedded on the lamp base of the light fixture (A).
TURNING THE LIGHT ON
- Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The lamp will not light. | The power is off. | Ensure the power supply is On. |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the ON position. | |
| The fuse blows or circuit breaker trips when the light is turned on. | There | |
| are crossed wires or the power wire is grounding out. | Check the wire |
connections.
Contact a qualifed electrician or call the Customer Service Team at 1-855-HD- HAMPTON.
Questions, problems, missing parts? Before returning to the store, call
Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6
p.m., EST, Saturday
1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual
for future use.
FCC STATEMENT
FCC SUPPLIER’S DECLARATION OF CONFORMITY
- Product information
- Product Name: LED table lamp
- Model No.: T02822
- Trade Mark: Hampton Bay
- Applicable standards: FCC CFR Title 47 Part 15 Subpart B
This device complies with related rules, operation is subject to the following two conditions.
- This device may not cause harmful interference and,
- This device must accept any interference received, including interference that may cause undesired operation.
The test result has been evaluated by Dongguan New Testing Centre Co., Ltd
laboratory and shown in the test report The test report number: It is
understood that each unit marketed is identical to the device as tested, and
any changes to the device that could adversely affect the emission
characteristics will require a retest. The following responsible party
designated in FCC §2.909 is responsible for this declaration: Company Name:
Rising Stars Lighting Co.,Ltd Company Address: 14 Robins Tree Ln, Irvine, CA
92602 USA
Signature (Full Name): Mia Zhang Title: Telephone Number:
+1-213-840-1232 Fax:
+1-213-840-1232 Date: 03/13/2023
Email: [email protected]