JBL QUANTUM 360P Wireless Console Headphones User Guide
- June 10, 2024
- JBL
Table of Contents
JBL QUANTUM 360P Wireless Console Headphones
WHAT’S IN THE BOX
-
JBL quantum360P Console Wireless headset
-
USB charging cable
-
REMOVABLE MIC
-
USB WIRELESS DONGLE
-
Windshield foam for boom microphone
-
QSG | WARRANTY CARD | Safety Sheet
Requirements
JBL SOFTWARE REQUIREMENTS
Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™| Mobile | MAC
Connectivity| PC| PS4/PS5| XBOX™| Nintendo Switch™|
Mobile| MAC
---|---|---|---|---|---|---
2.4GHz Wireless| | Stereo| Not Compatible| Stereo| Not compatible| Stereo
Bluetooth| Stereo| Not Compatible| Not Compatible| Stereo| Stereo| Stereo
OVERVIEW
- Game audio-chat balance dial
- Volume Control
- Microphone Mute / unMute
- CHARGING LED
- USB-C port
- 2.5mm jack for boom microphone
- Flat-fold ear cup
- POWER / 2.4GHz / Bluetooth LED
- Power on / off and Bluetooth pairing slider
- 2.4GHz LED
- 2.4GHz PAIRING BUTTON
POWER ON & CONNECT
Bluetooth
BUTTON COMMAND
First time setup
7a Connect the headset to your PC via 2.4GHz USB wireless connection.
7b Go to “Sound Settings” -> “Sound Control Panel”.
7c Under “Playback” highlight “JBL quantum360P Console Wireless Game” and
select “Set Default” -> “Default Device”.
7d Highlight “JBL quantum360P Console Wireless Chat” and select “Set Default”
-> “Default Communication Device”.
7e Under “Recording” highlight “JBL quantum360P Console Wireless Chat” and
select “Set Default” -> “Default Device”.
7f In your chat application select “JBL quantum360P Console Wireless Chat” as
the default audio device.
7G Follow the onscreen instructions to personalize your sound settings.
Dual source switching
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
Model : QUANTUM360P CONSOLE WIRELESS
Driver size : 40 mm Dynamic drivers
Frequency response (Passive) : 20 Hz – 20 kHz
Frequency response (Active) : 20 Hz – 20 kHz
Microphone frequency response : 100 Hz – 10 kHz
Max input power : 30 mW
Sensitivity : 98 dB SPL @1 kHz / 1 mW
Maximum SPL : 94 dB
Microphone sensitivity : -42 dBV / Pa @1 kHz
Impedance : 32 ohm
2.4GHz Wireless transmitter power : < 7 dBm (EIRP)
2.4GHz Wireless modulation : GFSK
2.4GHz Wireless carrier frequency : 2400 MHz – 2483.5 MHz
Bluetooth transmitted power : < 6 dBm (EIRP)
Bluetooth transmitted modulation : GFSK, π/4-DQPSK
Bluetooth frequency : 2402 MHz – 2480 MHz
Bluetooth profile version : HFP: v1.5, A2DP: v1.3
Bluetooth version : BT Core: v5.2
Battery type : Li-ion battery (3.7 V / 500 mAh)
Power supply : 5 V, 1 A
Charging time : 2 hrs
Music play time with only 2.4GHz on : Up to 22 hrs
Talk time with only 2.4GHz on : Up to 22 hrs
Music play time with only BT on : Up to 26 hrs
Talk time with only BT on : Up to 26 hrs
Microphone pickup pattern : Omni-directional
Weight : 256.4 g
References
- JBL Quantum Support
- Anatel — Agência Nacional de Telecomunicações
- JBL Australia Official Store - Speakers, Headphones & Sound Systems