serenelife SLSBIN15 Essential Storage Container Bin User Guide
- June 4, 2024
- serenelife
Table of Contents
serenelife SLSBIN15 Essential Storage Container Bin
Installation Instructions
Please read the instructions carefully before assembly and use. Clear the space for assembly and lay out all parts based on the Parts List. Ensure that all pieces are present.
- Place the Bottom Panel on a clean, smooth surface. Insert front and back panels into the bottom panel. Fasten card slot position respectively. Make sure the bottom and front panel is in the correct position as shown in figure 1.
- Next step, insert the left and right panels into the bottom panel’s corresponding card slot position and fasten as shown in figure 2.
- Insert the bolts on the assembled front, back, and side panels and snap them into place as shown in figure 3.
- Finally, attach the cover to the back panels corresponding spindle then finish assembly as shown in figure 4.
- You may set a password before use.
- Set all rollers into “0” (initial password) to unlock. Randomize the strumming wheel to lock
Set a new password: Set all rollers into “0”, dial trigger to A position, set the new password that you want, and make sure to write down & remember your code, then change the lever back from A to the B position. The setting of a new password is successful.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>