COOKLEE SM-1522NM Stand Mixer Instruction Manual

COOKLEE SM-1522NM Stand Mixer

Product Information

The SM-1522NM Stand Mixer by Shenzhen Deyi Electrical Technology Co., Ltd. is a kitchen appliance used for mixing, kneading, and whisking ingredients to create a variety of dishes. The mixer comes with standard accessories including a dough hook, beater, whisk, mixing bowl, and splash guard. The mixer has a maximum capacity of 2 kg of ingredients and has 10 different speed settings, including
pulse operation. The mixer is designed with safety switches to prevent injury from misuse.

Product Usage Instructions

Using the Mixing Bowl

1. Lift up handle metal ball (2) to lift the arm of the mixer.
2. Place the pot cover into its body.
3. Place the mixing bowl into its holding device and turn the bowl clockwise until it locks into place.
4. Mount the required utensil (Dough hook or Beater or Whisk) by inserting the top into the output shaft and turn anti-clockwise until it locks into place.
5. Fill in your ingredients, making sure not to overfill the machine.
6. Lower the arm using the Lift up handle metal ball (2).
7. Insert the mains plug into a properly installed AC220-240V 50-60Hz safety power socket.
8. Switch the machine using the speed knob to a speed between 1 and 10 (corresponding to the mixture).
9. For pulse operation (kneading at short intervals), turn the switch to the PULSE position.

Using Dough Hook, Beater, and Whisk Adjust the levels and use the dough hook for not more than 2 kg of mixture, as per the table below:

Clean the mixer after use by following these instructions:

Cleaning

1. Remove the mains lead from the socket before cleaning.
2. Never immerse the housing with motor in water!
3. Do not use any sharp or abrasive detergents to clean the motor housing.
4. Only a damp rinsing cloth should be used to clean the outside of the housing, mixing bowl, and mixing equipment.

Technical Data

• Model: SM-1522NM
• Rated voltage: AC220-240V 50-60Hz
• Power consumption: 1800W

General Safety Instructions

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).
• Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.Do not try to repair the appliance on your own. Always contact an authorized technician.If the supply cord is damaged,it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Use only original spare parts.
• Pay careful attention to the following “Special Safety Instructions”.

Children and Frail Individuals

• In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
  Caution! Do not allow small children to play with the foil as there is a danger of suffocation!

• When using accessory blender and chopper, the appliance shall not be use by children. Keep the appliance and its cord out of reach of children.

• When using accessory beater and whisk, the appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years

• This device is not a toy. Children shall not play with the appliance. and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

Special safety Instructions for this Machine

• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
• Do not use appliance for other than intended purpose.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• Only operate this machine under supervision.
• Do not interfere with any safety switches.
• Do not insert anything into the rotating hooks while the machine is working.
• Place the machine on a smooth, flat and stable working surface.
• Do not insert the mains plug of the machine into the power socket without having installed all the necessary accessories.
• CAUTION: Ensure that the blender is switched off before removing it from the stand.
• Regarding operating time and speed setting, refer to page 4.
• Warning: Potential injury from misuse.
• This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING,” These words mean
• You can be killed or seriously injured if you don’t immediately follow instructions.
• All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Overview of the Components

Main Components and Standard Accessories

1. Output shaft
2.  handle metal ball
3. Speed knob
4. Power Cord
5. Mixing bowl
6. Dough Hook
7. Beater
8. Whisk
9. Splash Guard

Using the Mixing Bowl

1. In order to lift the arm, Lift up handle metal ball (2) . The arm will now move upwards.（FIG1）
2. Place the pot cover into its body. (FIG2)
3.  Place the mixing bowl into its holding device(Step①) and turn the bowl clockwise until it locks into place(Step ②). (FIG3)
4. Mount the required utensil（Dough hook or Beater or Whisk）by inserting the top into the output shaft, and turn anti-clockwise until it locks into place. (FIG4&FIG5)
5. Now fill in your ingredients. Do not overfill the machine – the maximum quantity of ingredients is 2kg.
6. Lower the arm using the Lift up handle metal ball (2). (FIG6)
7. Insert the mains plug into a properly installed AC220-240V 50-60Hz safety power socket.
8. Switch the machine using the speed knob to a speed between 1 and 10 (corresponding to the mixture).
9. For pulse operation (kneading at short intervals), turn the switch to the “PULSE” position. The switch has to be held in this position according to the desired interval length. When the switch is released it returns automatically to the “0” position.
10. After kneading/stirring turn the speed knob (3) back to the “0” position as soon as the mixture has formed a Then remove the mains plug.
11. Lift up handle metal ball (2) downwards and the arm will be raised.
12. The mixture can now be released with the help of a spatula and removed from the mixing bowl.
13. The mixing bowl can now be removed.
14. Clean the parts as described under “Cleaning” .

How to use dough hook, beater and whisk

Adjusting the Levels and Using the Dough Hook for not more than 2 kg of Mixture

Cleaning

• Before cleaning remove the mains lead from the socket.
• Never immerse the housing with motor in water!
• Do not use any sharp or abrasive detergents.

Motor Housing
Only a damp rinsing cloth should be used to clean the outside of the housing.

Mixing Bowl, Mixing Equipment
CAUTION:

• The components are not suitable for cleaning in a dishwasher. If exposed to heat or caustic cleaners they might become misshapen or discolored.
• Components that have come into contact with food can be cleaned in soapy water.
• Allow the parts to dry thoroughly before reassembling the device.
• Please apply a small quantity of vegetable oil likely to the screens after they have dried.

Disposal

• Do not dispose of the device in normal domestic waste.
• Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
• Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>