ARUN 300W Portable Power Station User Manual

: June 10, 2024
: ARUN

ARUN 300W Portable Power Station

Keep outdoor storage battery products and accessories dry and away from fire.
Please do not disassemble or collide the product or perform illegal operations on the product ports.
Do not get caught in rain or water, if this happens, stop using immediately.
Please recycle and dispose products according to local laws and regulations.
Use by children and special groups must under the supervision of a custodian.
Do not cover or block the cooling device when using the product.

Glossary

The following glossary describes the level of risk due to improper operation.

Attention

It may compromise the product performance and damage the product slightly if do not perform in accordance with manual.

Watch out

It may compromise the product performance and damage the product seriously if do not perform in accordance with manual.

Warning

It may compromise the product performance, cause accidents and damage the product seriously if do not perform in accordance with manual.

Warning

Please read the entire user manual before using the product and get familiar with the functions of the product before operating.
ARUN will not be liable for any injury to yourself or others, product damage or property loss due to improper operation of the product.
Please do not use any accessories which is not recommended and provided by ARUN, Installation and use of products must be in strict compliance with ARUN’s guidelines, otherwise ARUN after-sales service will not be available.

Product safety guide

Warning

It may cause fire, product damage and injury with incorrect product using. Please be sure to follow the following safety instructions when using the product.

Product Disclaimer

Please read all safety tips, warning messages, Terms of use and disclaimers carefully. Before use, please refer to the terms of use and disclaimer on the manual and the label on the product. The user takes full responsibility for all uses and operations. Familiarize yourself with the laws and regulations in your area. It is your responsibility to understand all relevant regulations and use ARUN products in a compliant manner.

Product use

Do not touch the product with any liquid. Do not immerse the product in water or make it wet. Do not use the machine in the rain or wet environment, otherwise the battery will spontaneously burn, and may even lead to ignition the explosion.
Do not use non-official parts. For replacement, please visit ARUN’s official website for purchase information. ARUN shall not be responsible for any product accident or failure caused by the use of products not officially provided by ARUN.
Before installing or pulling out other modules of the machine, please keep the power of the machine turned off. Do not remove or insert other modules or parts when the machine is powered on. Otherwise, the power interface may be damaged.
If the ambient temperature is too high (higher than 40 ° C), batteries may catch fire or even explode. If the ambient temperature is too low (below -l0°C), the product performance will be seriously degraded and cannot meet the requirements of normal use. The device can be used normally after the normal temperature is restored.
Do not use the machine in the environment of strong static electricity or magnetic field, because it may not work properly. Otherwise, some of the protection functions of the machine may fail, resulting in serious damage of the machine.
It is forbidden to disassemble or prick the product with sharp objects in any way. Otherwise, it will cause product failure, fire or even explosion.
The machine shall not be used again if it is hit by a strong fall or external force.
If the product accidentally falls into water during use, place it in a safe, open area and keep away from the product until the product is completely dried. The dried products should not be used again and should be properly disposed of in accordance with the waste method described in this article. In the event of a fire, it is recommended to use fire extinguishing equipment in the following order: water or water mist, sand, fire blanket, dry powder extinguishing agent, and carbon dioxide extinguisher.
Do not place the machine in the microwave oven or pressure cooker.
Do not use wires or other metal objects to cause short circuit of the product.
Do not hit the machine. Do not place heavy objects on the machine.
lf there is dirt in the machine interface, clean it with a dry cloth. Otherwise it will cause poor contact, resulting in energy loss or failure to charge.
After the product power is used up, please recharge the product immediately, otherwise it will cause irreversible damage to the battery or the battery cannot be used.
lf the product is not used, please turn off the main power switch in time.

Product charging

The machine must be charged using ARUN official adapter. ARUN will not be responsible for any consequences caused by charging with an adapter other than the one officially designated by ARUN.
When charging, please place the machine on the ground without inflammable and combustible materials around. Please be on hand when charging the product to prevent accidents.
After continuous full load discharge, the battery may be in high temperature. Please wait until the machine drops to room temperature before charging.

Do not use adapters from other series of products to charge this series of products. Doing so will void your warranty. ARUN will not be liable for any injury or loss caused by the user’s failure to follow the instructions in this manual.

Product storage and transportation:

Keep the machine out of the reach of children. If children accidentally swallow parts, seek medical attention immediately.
If the machine prompts serious low power after use, please charge it before storage. Otherwise, the battery inside the product may be damaged if stored for a long time. If the battery power of the machine is seriously insufficient and idle for a long time, the battery will enter the deep sleep mode. If the battery needs to be awakened from the deep sleep, the machine needs to be charged.
Do not put the machine near a heat source, such as in a car on a hot day, a fire source or a heating furnace.
The machine should be stored in a dry environment. Do not place the machine in water or where water may leak.
Do not store or transport the machine with glasses, watches, metal necklaces, hair clips or other metal objects.
If you need to use express or logistics to transport batteries, please reduce the machine power to less than 30%.

Product battery waste:

Make sure that the battery of the machine is completely discharged before placing the battery in the specified battery recycling bin. Batteries are dangerous chemicals, do not waste in ordinary dustbins. Follow the local laws and regulations on battery recycling and disposal.

Product maintenance:

The operating/storage temperature of the product ranges from -10 ° C to 40 ° C, and the optimal operating/ storage temperature ranges from 20 ° C to 25 ° C.
If the machine is idle for a long time, its performance will be affected.
Please charge and discharge the battery every three months, that is, discharge the battery to 30% and then charge it to 85%. This preserves battery performance.

Precautions for boarding:

Unable to carry this machine on board.

Guide to product use care and safety

Congratulations to you !

Congratulations on becoming an ARUN user! This short manual will help you. Please take a moment to read the manual and follow the instructions in the manual to use the product, master how to use!

Attention

To turn the product on or off, you need to hold down the main power button. To enable the AC output power outlet, you need to hold down the AC power button while the product is on. This is designed to save battery power so that the product’s power can be saved for a rainy day. Please follow this manual to understand each port, button, display screen, etc. (Before you go any further, it is recommended that you charge the battery to 100%!)

Warning

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void \ the user’ s authority to operate the equipment. 1
Note: This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to :
Part 15 Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received including interfere

Product Functions

Liquid Crystal Display
Display the remaining power of the product, charge and discharge power and fault icon.
l0W Magnetic wireless power
Wireless charge output, maximum discharge power l0W.
TYPE-Cl Output port
Supports PD3.0 protocol and the maximum discharge power is 30W.
TYPE-C2 Output port
Supports PD3.0 protocol and the maximum discharge power is 30W.
Main power button switch
Long press this button for l.5 s to turn on/off the product. After this button is turned on, other keys can work normally.
Ventilation and heat dissipation ports
Do not block the fan heat dissipation vents.
ACll0V outlet
ll0V AC outlet, rated output power 300W, peak power 600W.
AC output key switch
Press and hold for 1S to enable or disable AC output.
USBA quick charge outlet
USBA fast charge outlet, maximum discharge power 18W.
SV2.4A USBA outlet
5V2.4A USBA outlet
USB (USBA, TYPE-C)output key switch
Long press 1S to turn on/off USB(USBA, Type-C)output
DC5521 output port
DC5521 output, support 12V SA, max discharging power is 60W.
DC Output key switch
Long press 1S to turn on/off DC/car charge output.
DC6530 charging port
Product charging port, the maximum charging power of I00W(support adapter, car
DC/Car charge output port
The vehicle charge output supports 12V 10A and the maximum discharge power is 120W.
Ventilation and heat dissipation port
Do not block the fan heat dissipation vents.
LED Lam PLED
lighting, support low light, strong light, slow flash, SOS four modes. Strong light glare, avoid direct view.
LED key switch
Long press IS to turn on/off LED, and click to switch the lighting mode.

Quick Start Guide

Let’s take a minute to understand the basic operation of the 300W portable series. Suggest fully charge it before using it

Press the key to turn on the main power
DC car charger output
Press the button to enable USB output
Press the key to turn on AC output
Press button to open LED

Product display interface

Display the remaining battery percentage.
The ring icon shows the remaining power, and the icon lights up and flashes in turn when charging.
Display the current input power of the product in watts.
Display the current output power of the product in watts.
When the vehicle charge outlet or DC5521 outlet is used, the DC/ vehicle charge output icon is displayed.
When any USBA port or Type-C port is used to discharge data, the USB output icon is displayed.
After AC output is enabled, the AC output icon is displaed.
When the product is overloaded or abnormal, the screen displays a warning icon.
Low temperature alarm icon.
High temperature alarm icon.
Under voltage alarm icon.
Over voltage alarm icon.

How to charge the battery

The charging port is located on the front of the product, including a DC6530 charging port and a Type-C charging port.
The product can be charged through the adapter, PD charger, car charger or solar panel. The charging connection diagram is as follows.
Note: TYPE-C charging port can only be charged by using PD 20V charger.