onn 100019624 30-Inch 2.0-Channel Soundbar User Guide

30″ 2.0-Channel Soundbar
Quick Start Guide

We’d love to hear from you.
Scan with your Walmart app and let us know what you think.

What’s in the Box?

Check to make sure you have everything below.

1. Main unit
2. Remote control
3. Batteries
4. Power Cord
5. User Manual
6. 3.5mm Audio Coble
7. Wall Mount Template
8. Quick Start Guide

Get to Know Your 30″ 2.0-Channel Soundbar

1. Power and standby.
2. Select the input source. (Optical, BT, Line In, and AUX.)
3. Volume down.
4. Volume up.
5. AC power jack.
6. Line in jack IL/White, R/Red)
7. Optical input.
8. Aux-in 3.5mm stereo jack.
9. Mounting placement

Let’s Get Started!

Here’s what you’ll need to get set up:

Battery Replacement for the Remote Control

Lift up the back cover to open the battery compartment of the remote control. Insert two AAA size batteries. Make sure the (+) and (-) ends of the batteries match the (+) and (-) ends indicated in the battery compartment. Close the battery compartment cover.

Connection for power cable

Attaching the power cable: Insert the end of the power cable into the power socket on the bock of the Sound Bar.

Connection for other audio equipment

Use the 3.5 mm AUX coble (included) to connect the MP3 player, smartphone or other audio equipment.

Connections for TV set

For the best audio experience use the optical connection. Use an Optical cable (included) to connect the TV’s Optical out port to the soundbor’s Optical Port.

For those TVs without optical out port, please use the Line in cable (included) to connect the N.

Connection for Bluetooth

• Turn on the power, press ( ) on the unit or remote control
• Keep the distance of the soundbar and your Bluetooth-enabled device within 3.28ft/1 meter. The closer, the better.
• Ensure Bluetooth is enabled on your device.
• Select the Bluetooth mode on the soundbar:
• Using the remote control, press the Bluetooth button. The indicator light on the soundbar will flash blue.
• Alternatively, press the source button on the soundbar until the indicator light is flashing blue.
• Connect to your device through Bluetooth wireless technology: Search for the entry “onn. 30” Soundbar on your device. Your device is connected with the soundbar when the blue indicator light stops flashing and becomes solid.
• If you want to connect with another device:
• Using the remote control, press and hold the Bluetooth button for 3 seconds until the blue indicator light is flashing.
• Alternatively, press and hold the source button on the soundbar for 3 seconds until the blue indicator light is flashing.
• Ensure Bluetooth is disabled on your last device. Now you can connect with your other device.

But Wait … There’s More!

If Hints and Tips a problem occurs, it may often be due to something very minor. The following table contains various tips:

• When switching to another channel, the Bluetooth will be in disconnected status.
• When blue indicator is flashing, the Bluetooth will be in disconnected status.
• When blue indicator becomes solid, the Bluetooth will be connected successfully.

• Ensure the mains Power cord is connected securely at both ends.
• Make sure that the ON mode is selected.

The remote control is not
functioning|

• Use the remote control near the unit.
• Replace the battery in the remote control with a new one.
• Any obstacles between the remote control and the unit.

Loud hum or noise is heard|

• The plugs and sockets might be dirty. Wipe them with an appropriate cleaning solution.

If any functional abnormality is encountered, unplug the unit from the outlet and plug it in again.

The Fine Print

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.
Need help? Were here for you every day from 7 a.m. – 9 p.m. CST. Give us a call at 1-888-516-2630.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>