Rowenta SF3210 Hair With Lining Straightener Instructions

: June 10, 2024
: Rowenta

Table of Contents

Rowenta SF3210 Hair With Lining Straightener
Product Information
Product Usage Instructions
SAFETY INSTRUCTIONS
GUARANTEE
MAINTENANCE
TROUBLESHOOTING
ENVIRONMENT PROTECTION FIRST
USING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rowenta SF3210 Hair With Lining Straightener

Product Information

The product is a household appliance designed for straightening hair. It should not be used for professional purposes. The guarantee becomes null and void in case of improper usage. The appliance contains valuable materials which can be recovered or recycled. The product comes with safety instructions that should be read before use.

Product Usage Instructions

Before using the appliance, read the safety instructions carefully.
Ensure that the appliance is meant for household use only and not for professional purposes.
Switch off the appliance and unplug from the power source before cleaning.
Clean the appliance with a dry cloth to avoid damage.
If you encounter any issues with the product, refer to the troubleshooting section in the manual.
To protect the environment, dispose of the appliance at a local civic waste collection point or an authorized service center for processing.

Note: Please visit www.rowenta.com to access the product instructions in different languages.

Please read the safety instructions before use

SAFETY INSTRUCTIONS

For your safety, this appliance complies with the applicable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility, Environmental…).
The appliance’s accessories become very hot during use. Avoid contact with the skin. Make sure that the supply cord never comes into contact with the hot parts of the appliance.
Check that the voltage of your electricity supply matches the voltage of your appliance. Any error when connecting the appliance can cause irreparable harm, not covered by the guarantee.
For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask for installer for advice.
- Burn hazard. Keep appliance out of reach from young children, particularly during use and cool down.
- When the appliance is connected to the power supply, never leave it unattended.
- Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface.
The installation of the appliance and its use must however comply with the standards in force in your country.
WARNING: do not use this appliance near bathtubs, showers, basins or other vessels containing water.
When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
For other countries not subject to EU regulations: this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
For countries subject to EU regulations ( ): this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Stop using your appliance and contact an Authorised Service Centre if:
- your appliance has fallen.
- it does not work correctly.
The appliance must be unplugged:
- before cleaning and maintenance procedures.
- if it is not working correctly.
- as soon as you have finished using it.
- if you leave the room, even momentarily.
Do not use if the cord is damaged.
Do not immerse or put under running water, even for cleaning purposes.
Do not hold with damp hands.
Do not hold the appliance by the casing, which is hot, but by the handle.
Do not unplug by pulling on the cord, rather pull out by the plug.
Do not use an electrical extension lead.
Do not clean with abrasive or corrosive products.
Do not use at temperatures below 0°C and above 35°C.

GUARANTEE

Your appliance is designed for use in the home only. It should not be used for professional purposes. The guarantee becomes null and void in the case of improper usage.

MAINTENANCE

CAUTION! Always unplug your appliance and allow it to cool before cleaning it.

To clean the appliance, unplug it and then wipe with a damp cloth and dry with a dry cloth.

TROUBLESHOOTING

You’re not happy with the results you’re getting from your straightener:
- Press the straightener plates more firmly against your hair section.
- Slide your straightener more slowly.
- Increase the temperature using the “+” button.
The plate isn’t static.
- This is quite normal, the straightener is fitted with a mobile plate to get better results from your straightener.