zafferano LD0340B3 Poldina Rechargeable Table Lamp Instruction Manual

: June 4, 2024
: zafferano

Table of Contents

INSTRUCTIONS FOR USE
COLOR TEMPERATURE CONFIGURATION
CHARGE / INDICATOR LEDS
INCLUDEN AND NOT INCLUDED ACCESSORIES
Documents / Resources

LAMPES-A-PORTER Rechargeable table lamp

INSTRUCTIONS FOR USE

LD0340B3 white
LD0340N3 dark grey
LD0340R3 corten
LD0340A3 blue
LD0340G3 sage green
LD0340P3 pink
LD0340M3 dark green
LD0340S3 sand
LD0340F3 red
LD0340X3 bordeaux
LD0340BFA silver leaf
LD0340BFO gold leaf
LD0340RFR copper leaf
It is not recommended to use the lamps with metallic leaf finish for continuous outdoor use.

INCLUDED

Single-contact charging station

LED DIMMER
2,2W LED • 192-200lm • 2700-3000K
IP65 • 100-240V • 50-60Hz
CRI>80 • 5Vdc max 1A
Ø 11 x h 38 cm / Ø 4,3 x h 14,9 in

NOT INCLUDED

| LD0350RP
Multi-contact
charging base (max. 6 pc)
---|---
| LD0340RA
Multi-socket USB
charger (8xUSB)
| BAT04703706701900
Replacement battery pack
| KIT00009006800200
Replacement LED board

This product contains a class E light source

Tips for use:
This product is exclusively for lighting purposes and:
A) It must not be exposed to heavy mechanical loads or contamination;
B) It can be installed and used only after checking the state of the product; check that is not dirty and has not been damaged during storage;
C) Installation and maintenance must be carried out when the appliance is switched off;
D) Any alterations to the product, any tampering, and any failure to comply with the instructions provided may make the appliance hazardous;
E) When fully assembled, the lamp (head+structure, without the recharging base), reaches an IP65 rating, making it ideal for outdoor use. The light fixture (top) alone and the assembled lamp placed on the recharging base have an IP20 rating, making it unsuitable for outdoor use;
F) All metal and plastic surfaces should be cleaned with a soft dry cloth;
G) The company Zafferano shall not be held liable for any damage caused due to its products being assembled in any manner that does not comply with the instructions provided.
Technical data of the lamp:
– Power: 2,2 W
– Volt: DC 5 V
– Color temperature: 2700 – 3000 K
– Lumen lamp: 192-200 lm
– Lithium battery pack included (see section accessories included); for instructions about how to replace the battery pack, please consult the website: www.zafferanoitalia.com. Use only original batteries for replacement.
– Charge: 6 h
– Battery life: 9 h
– Class: III
– Protection rating: IP65
– CRI>80
Battery charger technical data:
– Contact charging base: INPUT/OUTPUT 5Vdc – 1A; Cavo USB 1.2 Mt.
– Charger: INPUT AC100-240V 50/60Hz; OUTPUT 5Vdc- 1A.
– The lamp works correctly even when connected to the charging base.
– It is advisable to use the original charger and charging base. Alternatively, you can use a certified 1A max. charger.
Important:
– The versions with a metal leaf finish are handmade and protected by a clear varnish. We recommend cleaning using only a soft, dry cloth. The use
of aggressive cleaning agents or abrasive cloths, and any accidental knocks may damage the delicate leaf finish.
– The support surface for the lamp must not exceed a 15° tilt or it will fall.
– The battery has an overload protection function.
– To preserve the integrity of the battery, we recommend keeping the charge between a minimum 20% and a maximum of 80%; if the lamp is not used for long periods, it is advisable to regularly charge/discharge the product.
– Please refer to local laws for the proper disposal and recycling of the battery.

INSTRUCTIONS FOR USE

SWITCHING ON / SWITCHING OFF / DIMMING

Quick taps to:
turn on
turn off the lamp

When the lamp is switched on, lightly press the touch sensor to obtain the desired brightness. Every time you turn it on, the light intensity will correspond to the previously set intensity.

COLOR TEMPERATURE CONFIGURATION

When the lamp is switched off, press lightly for 4 seconds until a steady blue LED lights up

Quick tap on the touch sensor to change the color temperature of the lamp

Light pressure for 4 seconds to set the new color temperature and switch off the lamp

CHARGE / INDICATOR LEDS

Charge the battery before initial use. To correctly charge the lamp, we recommend that you:

Connect the USB cable to the adaptor;
Put the plug into the electrical socket
Place the lamp on the charging base;
When fully charged, disconnect the plug from the electrical socket

RED LED
charging in progress

GREEN LED
the battery is charged, it is advisable to disconnect it from the power charger

INCLUDEN AND NOT INCLUDED ACCESSORIES

INCLUDED
Single-contact charging station

INPUT: 5Vdc max 1A
OUTPUT: 5Vdc max 1A

INPUT: AC100-240V
50/60Hz
OUTPUT: 5Vdc max 1A

NOT INCLUDED
LD0350RP
Multi-contact charging base (max. 6 pc)
INPUT: AC220-240V
50/60Hz
OUTPUT: 5Vdc max 5A

LD0340RA
Multi-socket USB charger (8xUSB)
INPUT: AC100-240V
50/60Hz
OUTPUT: 5Vdc max 8A

BAT04703706701900

Replacement battery pack

https://www.youtube.com/watch?v=ONaE5c1sTTc&list=PLJj- iX063IS3kuBXB3fwDfutkZ_PufP-7&index=2

Scan the QR code to see how to replace the exhausted batteries of your lamp.

KIT00009006800201

Replacement LED board

http://qr.w69b.com/g/ug0aG7gLS

Scan the QR code to see how to replace the LED board of your lamp.

LEGEND

| User-replaceable source
---|---
| User replaceable light source
| User-replaceable LED source
| LED source replaceable by qualified personnel
| Non-replaceable LED source
| User-replaceable driver
| Driver replaceable by qualified personnel
| Non-replaceable driver
| User-replaceable battery
| Battery replaceable by qualified personnel
| Non-replaceable battery

Before replacing the device component, watch the video tutorial by scanning the dedicated QR code. If necessary, contact qualified personnel.

All rechargeable batteries are subject to wear when used. The life of batteries, which can generally be recharged at 450 times may be reduced by certain factors:
incorrect recharging mode (the lamp must be recharged when it is flat: about 10% of its remaining autonomy);
when left unused for a long time;
when left for a long time on a live recharging base even if the lamp is recharged;
when non-original accessories are used for recharging;
when the product is exposed to very high or very low temperatures. When the lamps no longer recharge or their autonomy after recharging is very short, the batteries must be replaced. Spare parts for Zafferano rechargeable lamps can be found in the catalog and identified by a special code. The warranty for batteries is only valid for manufacturing defects, which may occur after initial use.

DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC • Zafferano srl, Viale dell’Industria, 26 – 31055 Quinto di Treviso – TV – Italia • For more information and updates visit our website • www.zafferanoitalia.com

https://www.zafferanoitalia.com/lampesaporter/it/
Zafferano srl
Viale dell’Industria, 26
31055 – Quinto di Treviso – Italia
T +39 0422 470507
F +39 0422 470400
lighting@zafferanoitalia.com
C.F 03420190260 – P.IVA IT 03305480273
REA di TV n. 330102
zafferanoitalia.com
10/2021

Documents / Resources

| zafferano LD0340B3 Poldina Rechargeable Table Lamp [pdf] Instruction Manual
LD0340B3 Poldina Rechargeable Table Lamp, LD0340B3, Poldina Rechargeable Table Lamp, Table Lamp, Lamp
---|---