SPOKEY 941206 E-Rush Electric Skateboard User Manual

June 10, 2024
SPOKEY

SPOKEY 941206 E-Rush Electric Skateboard

Product Information

The e-RUSH electric skateboard from Spokey is a high-performance skateboard that comes with a remote control for easy operation. The skateboard is made of high-quality materials, including a 7-layer maple deck and a 72mm hub motor. The lithium battery has a capacity of 2000mAh and takes only 2 hours to charge fully, giving you a mileage of up to 8km. The skateboard comes with three speed modes – low, medium, and high – and can reach a maximum speed of 20km/h. The skateboard also features a front truck, handle, battery indicator, power button, and charge port.

Product Usage Instructions

  1. Before using the e-RUSH electric skateboard, read the user manual carefully, especially the safety instructions.
  2. Pair the skateboard and remote control by turning off both devices, turning on the skateboard, and pressing the pair button on the remote control. Once paired successfully, test all functions to ensure they work normally.
  3. Wear a helmet and safety gear before riding the skateboard.
  4. Confirm the front direction of the skateboard before riding.
  5. Stand on the widest front and back parts of the skateboard with your feet.
  6. Start with the low-speed mode to become familiar with the acceleration and brake of the skateboard.
  7. Stop riding by using the remote control brake operation. Get down your front foot first and then your back foot.
  8. The electric skateboard has three speed modes – low, medium, and high. Adjust the speed mode according to your riding experience.

By following these usage instructions, you can enjoy your e-RUSH electric skateboard safely and have lots of fun with it in the future.
Thank you for buy our electric skateboardDo note that an electric skateboard is not atoy. Please take time to learn it and read thismanual carefully. Particularly the safety instruction pages.
We hope you will enjoy this product and havelots of fun with it in the future.

SAFETY INSTRUCTIONS

  • The electric skateboard is not a toy, and should be treated with appropriate caution. Always practice safety first-as it is possible to lose balance and cause a collision or fall. Ensure that you use the board in a safe appropriate environment, and always wear appropriate safety gear.
  • Safety Gear: we recommend that you wear full safety gear while riding. Please wear a suitable skateboard helmet, elbow pads, knee pads, and gloves.
  • Wear shoes: Flipflops or similar loose footwear are not suitable for riding wear.
  • The skateboard is designed for rider over 10 years old and above.
  • Only one person riding for each skateboard at a time. The maximum load of the board is 70kg. Exceeding this weight will compromise the structural integrity of The skateboard, as well as the remote and functionality, and may cause board damage, losing control or another breakage.
  • Please observe your local traffic laws and regulations.
  • The board is designed to drive on flat and paved surfaces. Avoid driving on sand, gravel, mud, or rugged or open ground. Do not drive on slippery ground, such as snow, ice or wet ground.
  • Keep fingers, hairs, and clothing away from motors, wheels and moving parts.
  • Do not open or tamper with electronics housing. Electric shock is possible and this also voids the warranty.

PARTS DIAGRAM

REMOTE CONTROL

* Remote control : If the red light is on, it means that there is only 5% of the battery, so please charge it immediately.

PAIR INSTRUCTION

  • At the first step, the Board and Remote must be paired. Before starting, ensure the Board and Remote are turned off.
  • Turn on the board
  • Turn on the remote, then press the pair button. the signal indicator will flash and the power button light will flash with the same frequence. Then means thepaired successfully.
    Push the joystick, forward to test the accelerator and backward to test the brake.
    After tested all functions work normally you can start your riding.

PREPARATION

  1. Be sure that wear a helmet and safety gear when you ride it

  2. Confirm the front direction of the skateboard

  3. Confirm the position on the skateboard.
    The feet stand on the widest front and back skateboard.

  4. Please start with the low-speed mode to be familiar with the acceleration and brake of the skateboard.

  5. Please stop riding by remote control brake operation, then get down your front foot at first and then get down your back foot.

SPECIFICATION

Capability Mileage 8KM
Low speed 10KM/H
Medium speed 15KM/H
Max speed 20KM/H
Board N.W. 3.7KG
Size 650180110mm
Max load 70KG
Material 7 layers maple
Battery Capacity 2000mAh
Type 29.4V lithium battery
Charging time 2 hours
Motor Type 72mm Hub Motor
Power Single-motor 350W
Wheel Material PU
Remote Size 72*51mm
Distance 14M
Frequency 2.4GHz
Charge time 2 hours
Package Size 670250190mm
G.W. 5.7KG

NOTE: The battery WARRANTY is valid for 6 months from the date of purchase, provided it is used properly

CERTIFICATIONS

Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumula- tors and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the re-turn, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances.
www.spokey.eu
SPOKEY sp. z o.o.
tel: +48 32 317 20 00, www.spokey.pl / www.spokey.eu e-mail: biuro@spokey.pl /office@spokey.eu

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals