globe 61209 Pendant Light Instruction Manual
- June 4, 2024
- globe
Table of Contents
61209 Pendant Light
Instruction Manual
Made in China
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain them for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all the required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over-tighten the screws and bolts as this may damage the threads.
When you have finished assembling the product, place it on a flat surface and
make sure it is stable before use.
Do not let children play with this product.
DANGER
Risk of suffocation! Keep any packaging materials away from children.
Cleaning & Maintenance
Keep the product away from direct heat and sunlight.
Prolonged exposure to heat sources may cause glazing, melting, and scorching,
or even cause the color to fade.
Regular vacuuming or light brushing helps to remove dirt and prevent soil
build-up, which increases the appearance of wear.
Periodically (every 90 days) make sure that the screws are fully tightened.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from the power source before
assembling or cleaning.
Switch off, unplug and allow the bulb to cool before replacing the bulb or
cleaning.
Use a soft clean dry cloth that will not scratch or smudge the surface when
cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Electrical Installation
FIG. 1 Place the wall switch in the “OFF” position.
Depending on which type of fuse box you have in your home:
FIG. 2 Place either the main (Master) switch in the “OFF” position,
cutting off power to your entire home; OR turn off the individual switch that
provides power to where the fixture will be installed.
OR FIG. 3 Place either the main (Master) switch to the “OFF” position,
cutting off power to the entire home; OR unscrew the fuse that provides power
to where the fixture will be installed.
| | 
---|---|---
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE THE CORRECT BRANCH CIRCUIT CONDUCTOR.
Contents
Before getting started, ensure the package contains the following components:
Assembly
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>