SHREYANS CD410 Thermal Label Printer User Manual
- June 10, 2024
- SHREYANS
Table of Contents
SHREYANS CD410 Thermal Label Printer
Product Information
The product is a series of printers with wireless (Bluetooth) and wired
(USB or serial interface) connectivity options. The printer is compatible with
black mark mode and label mode. It has two indicators, blue and red, to
indicate the status of the printer.
Label Model Switching:
To switch between black mark mode and label mode, follow these steps:
- For black mark mode, load the black mark paper and press down the FEED button for 5 seconds. The printer will automatically learn the black mark paper (with the black mark facedown).
- For label mode, load the label paper and press down the FEED button for 5 seconds. The printer will automatically learn the label paper.
Bluetooth Connection:
To connect via Bluetooth, follow these steps:
- Turn on the printer and search for it using Bluetooth on your mobile device (Android or Apple iOS).
- Select the corresponding printer and enter the password (factory default: 0000) to connect.
Wired Connection:
To connect via USB or serial interface, follow these steps:
- Use the data cables packed with the printer to connect it to your PC.
- Install the printer driver from the attached CD or request it from suppliers or customer service personnel.
Buzzer State Description:
-
Beep 3 sounds: Out of paper. Solution: Load paper correctly.
-
Beep 5 sounds: The print head is overheated. Solution: Wait for
the printer to cool down and continue working. -
Beep 6 sounds: Cover opened. Solution: Close the cover correctly.
-
Beep 8 sounds: Label calibration anomaly. Solution: Open the
top cover, load the paper, then close the cover. The printer will automatically learn the label paper.
Product Usage:
-
Place the printer on a flat and stable platform to avoid damage caused by accidental fall.
-
Avoid using the printer in high environment temperature (>45) or low temperature(85%RH) or low humidity.
-
Follow the label model switching instructions to switch between black mark mode and label mode as per your requirement.
-
To connect via Bluetooth, turn on the printer, search for it using Bluetooth on your mobile device (Android or Apple iOS),
select the corresponding printer, enter the password (factory default: 0000) to connect. -
To connect via USB or serial interface, use the data cables packed with the printer to connect it to your PC, and install the printer driver from the attached CD or request it from suppliers or customer service personnel.
-
If you encounter any buzzer state descriptions, follow the given solutions to resolve them.
Contents of this manual without the permission of the company shall not be free to change and replication, we reserve the right to change the product, if user needs the product further information can contact directly with the supplier.
Product Introduction
Function and features
Items | Parameter |
---|
Print parameters
| Print method| Thermal dot line printing
Resolution| 203DPI, 8dots/mm
Print width| 108mm (864dots)
Print speed| 150mm/s
Communic
ation
| Wired| Standard USB, Type-B interface
Wireless| Bluetooth (optional), SPP (Android), BLE (Apple iOS)
Storage
| / RAM
FL ASH
| JPL / TSC / TSPL / EPL / CPCL / ESC Compatible instruction Set 512KB
FLASH: 16MB, NV bitmap FLASH: 64KB
Characters
| Chinese| GB18030
Characters and
figures
| ASCII
User defined| Support
Language (Code
page)
| Support simplified & traditional Chinese, English and other 45 kinds
of international character sets.
Tables
|
/
| Support dots printing with different densities
Support raster bitmap print
Support to download the bitmap print, the maximum size of each bitmap is not
more than 64K, the total size of the download bitmap is 64K.
Barcode
| 1 D| UPC-A、UPC-E、EAN-8、EAN13、CODE39、ITF、CODEBAR、
CODE128、CODE93
2 D| QR Code
Detection| Sensor| Paper out, Cover open, label gap detection
Indicators| LED| Power indicator, Bluetooth indicator, error indicator
Printing Paper
| Type| Standard thermal label paper
Width| 108mm
Thickness| 0.056~0.15mm (thermal label paper)
External diameter| Maximum 100mm
Paper loading| Easy to load paper structure
Physical characterist ics
| Paper tore| manual
Operating environment| Temperature: -10℃ ~ 50℃, Humidity: 25% ~ 80%R H
Storage
environment
| Temperature: -40℃ ~ 70℃, humidity: <93%RH (40℃)
Size| 226.66mm 178.6mm 160.76mm (Length WideHigh)
Weight| 1.2Kg (Printer-only)
Reliability
| TPH life| 50Km
Motor life| 360,000 hours
Software
|
Drivers
| Windows (WIN 10/WIN 8/WIN 7//Vista /XP /2000)
UBUNTU 12.04 32/64 UBUNTU 14.04 32/64
APP| Easy Label, Printer setting tools, etc
Basic operation
-
Power on
Connect the power cord and power adapter of the printer, press down the power switch, then the printer power on. At this time, the power indicator is on, and the buzzer prompts a beep. -
Power off
When the printer on, press down the switch that can make printer off. At this time, all the indicators off, and the printer off and stops working. -
Automatic label learning
In power on and cover open status, load down the thermal label roll, close the cover, then the printer will automatically learn to detect the label gap. -
Print self-test page
After the user gets the printer, the printer can be self-test to detect the current settings and working status. When the printer is power off and the print paper is loaded correctly, press down the “Power on/off” button and “Feed” button simultaneously, after hearing a beep sound, release the two buttons, the printer will print a self-test page. The self-test page contains information about the current status of the printer, settings and printing examples, such as the Bluetooth PIN, Bluetooth BDA, printing language, program version, font, etc. -
Feeding paper (Manual feed)
In the normal working status, press the “Feed” button, the printer will feed paper. -
Label model switching (black mark / label model)
This product is compatible with black mark mode and label mode, if you need to set the black mark mode, load the black mark paper and press down the FEED button for 5s, then the printer can automatically learn the black mark paper (the side with black mark facedown), otherwise switch the label mode, put the label paper and press down the FEED button for 5s to release that can automatically learn the label paper.
Communication connection
Wireless connection (Bluetooth)
This series of printers is equipped with a stable wireless connection mode,
(SPP / BLE). Bluetooth SPP can support communication printing with mobile
terminals installing Android operating system, and Bluetooth BLE can support
communication printing with mobile terminals installing Apple iOS operating
system.
Bluetooth connection method: After the printer is turned on, search the
printer with Android and other Bluetooth communication devices, select the
corresponding printer, enter the password (factory default: 0000) for
connection, and it can be used normally after successful connection.
Description: The interface is optional, please refer to the actual product
purchased
Wired connection (USB or serial interface)
Use the data cables packed with the printer to connect the printer to the PC,
and then install the printer driver. The printer driver can be gotten from the
attached CD or requested from suppliers or our customer service personnel.
Description: The interface is optional, please refer to the actual product
purchased.
Accessories
- Printer 1 pc
- USB cable 1 pc
- Power adapter 1 pc
- Power cord 1 pc
- User’s manual 1 pc
Description: The specific product accessories may differ from this list. Please take the actual product purchased as. If you have any questions, please consult your supplier timely.
Attentions
- The printer shall be placed on a flat and stable platform to avoid damage caused by accidental fall.
- The high environment temperature (>45℃) or the low temperature(<5℃) will reduce the print quality.
- The high humidity (>85%RH) or the low humidity (<20%RH) will reduce the print quality.
- Don’t open the cover of paper bin in printing process.
- Using low quality or storage too long time print paper will reduce the print quality, even damage the printer.
- If there is dirt at the print head, need to use a soft cotton or cotton swab to dip alcohol and wipe it clean to prevent the print head from being worn.
- Don’t touch the print head and retainer directly in order to avoid damaging the print head because of static electricity. Don’t scratch or touch the print head with a hardened object to avoid damaging the print head.
- Please try to use up the battery before charging, which can effectively protect the battery life.
- In the course of any accident, please disconnect the printer power supply, and remove the printer battery immediately.
- If user disassemble the printer, the company has the right to refuse warranty on the product.
The printer uses a thermistor to detect the temperature of the print head. If the print head overheat, the circuit will cut off the print head and stop printing. The print head is protected by overheating at 80℃.
Storage Precautions
- If the printer is not used for a longer time, disconnect the power to the printer power adapter.
- Ordinary thermal printing paper storage time is short. If you want to print documents that need preservation for a long time, please choose long-term thermal printing paper.
- Heat-sensitive printing paper should not be stored in a place with high temperature, high humidity, or direct sunlight. If it has been unsealed, please put it in a place to avoid light.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated wit
h minimum distance 20cm between the radiator & your body.