Trend Vision Light Up Rechargeable Quadcopter Drone Instruction Manual

Trend Vision Light Up Rechargeable Quadcopter Drone

Thank you for your purchase of this product. Please read the Operation Instruction carefully and conduct operation and usage according to the Operation Instruction. Please keep this User Manual for your reference when conducting daily maintenance and adjustment.

OVERVIEW

REMOTE CONTROL

Low power indication: when the power is lower than 3V, there is the warning tone “Di—Di”, it means user needs to change the new batteries.

BATTERY INSTALLATION

Battery Installation: Open the battery cover on the back of the remote control and follow the instructions of electrodes in the battery box.
Insert 3 x AA alkaline batteries correctly.
(Batteries are not included)

Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc),or rechargeable (nickel-cadmium) batteries.

CHARGING BATTERY FOR THE QUADCOPTER
Turn off the quadcopter and slide the battery out from the quadcopter.
Connect port A to the power supply and connect port B to the battery.
The red light will be on when charging. The charging time is about 100 minutes.
The light will be off when full.

Important:

1. Please stop charging the battery when the port heats up. This may cause damage to the battery.

2. Charge the battery only under adult supervision.

3. Please only use the factory—supplied USB cable to charge the battery.

4. Please do not charge the battery if the temperature is warm after flying.
   Please make sure the battery is cooled down before charging.

5. Please do not throw the battery into the fire.

FLIGHT ENVIRONMENT REQUIREMENTS

OPEN THE WING

Opening Steps:

1. Open the front arm (close to camera)
2. Open the back arm
   To close the wings reverse the steps.

INSTALLING THE PROPELLERS

There are extra propellers supplied with the drone in case of damage or defect on the originally installed propellers.

1. When installing for the first time, please carefully distinguish the propellers type.
2. Referring to Figure 3, insert the groove of propeller opener into the bottom of propeller which needs to be replaced. And press the handle of the opener to take down the propeller.
3. Referring to Figure 4, distinguish between type A and type B propellers, and press the propeller vertically to install them on the motor shaft. the mark can be found on the rotor. It is extremely important to use the correct propeller (A or B) for replacement.
   Using the incorrect propeller may cause the drone to be uncontrollable.

PREPARE TO FLY

Make sure the propeller is installed correctly and the arms are fully opened.

1. Press the ON/OFF button on the drone for 2 seconds to turn on the drone.
2. Open the remote control handle. Turn on the power and hear “Di” sound is successful.
3. Push the left lever up and down. The indicator light is always on.

Take-off Method 1:

1. Bring both lever towards each other to start calibration.
2. Push both levers away from each other to unlock the quadcopter.
3. Slowly push the left lever up to start propeller and begin flight.

Take-off Method 2:

1. Operating the right and left control lever to start calibration.

2. Short press one key take-off/landing button.
   The quadcopter will take off.

3. Push the lever down slowly until the quadcopter lands. Keep the lever at the lowest position,the motor stops and the quadcopter lands successfully.

4. Short press one key take-off/landing button.
   The quadcopter will be landing.

OPERATING DIRECTION

IMPORTANT NOTICE
If the quadcopter begins to drift or turns while having no input from the controller, this issue can be rectified by fine turning the flight trim.
Please follow the pictorial below for fine tuning.
When the quadcopter is relatively close to the ground, the flight stability may be affected by the buffeting of wind from the rotating blades.
This effect will be stronger as the quadcopter gets closer to the ground.

FLYING TRAININGS

Try some training and get familiar with drone with some basic learning.

PROBLEMS & SOLUTIONS

FLIGHT PREPARATION
Please inspect the following checklist before flying.

1. Ensure that the drone and remote control are both fully charged.
2. Ensure that all Propellers are not damaged and installed properly.
3. Ensure that there is no debris that may hinder propellers’ spin.
4. Ensure that the connection between the drone and remote control/smart device. is strong and clear.
5.  Ensure that the drone’s arms are fully open.
6. Ensure that the environment is suitable for flying.
   Notes: PIease check drone’ arms are fully open.

SAFETY INSTRUCTIONS

1. Please keep the parts of drone out of the reach of children.
2. This drone is very powerful. When using it for the first time, you should push the left control lever slowly to prevent the drone from rising too fast and causing unnecessary collisions and injuries.
3. When a flight is ended, please tum off the power switch of remote control first and turn off the power switch of the drone then.
4. Do not place the drone battery in high-temperature condition or near flammable or explosive materials.
5. Please keep the drone at a distance of 4.5 meters / 15 feet from humans and animals to ensure safety and prevent injury.
6. This drone is suitable for people aged 14 and over, and it should be within the sight of the operator’s (coach) to ensure safe flight.
7. Do not charge the battery of remote control if the battery is a non-rechargeable battery. The drone must be used with the original batteries.
8. If the drone will not be used for a long time, please take the batteries out of the remote control unit.
9. Do not cause a short circuit during the charging.
10. If you do not use the drone for more than 10 days, please discharge the battery of drone to 40-50% (light for a certain time). In this way, the life of battery will be extended greatly.
11. Please keep a safe distance from the rotating propeller to prevent injury.
12. All operators should follow their local regulations pertaining to radio control and drone flights Please contact your local authorities for the full details on your local laws and regulations
13. Please assemble the drone under the supervision of an adult.
14. Operators are responsible for their safe flight and safe distance. Do not hover and fly over the crowd (more than 12 people).

USE WITH SMART DEVICE (NOT INCLUDED)

1. TO INSTALL THE APP IN YOUR SMART DEVICE
   Scan the correspondinq QR code to download and install the APP (LFun_Pro).

2. CONNECT THE DRONE AND SMART DEVICE USING WIFI
   Turn the drone on. While red flashing light is on, turn on the WIFI function in your smart device and select the name “WIFI LSH XXX” in the list to make the connection.
   After connected, open the “LFun_Pro” app. Press “START” in program. The indicator light on the drone will turn steady after SUCCess. The smart device screen will start streaming video with the drone.
   Please turn off the drone and WIFI function on your smart device.
   Make sure the app on your smart device is closed completely.
   Redo the above step if connection is not success.
   Control distance and the live streaming video will depend on the WIFI quality of your smart device.

3. MAIN INTERFACE INSTRUCTIONS

4. START

  * To enter the flight interface
2.  (HELP)
  * Quick start guide and list of icon function

4. INTERFACE OPERATION INSTRUCTIONS

5. Return
   Return to main interface

6. Take Photo
   Press to take photo

7. Record Video
   Press to start video recording, press again to stop

8. Media
   Enter the photo or video library.
   Press return icon to exit.

9. Speed Level
   To switch the speed of the drone between 300/0 / 600/0 / 1000/0

10. Gesture Recognition
    Press to turn on gesture to take photo or video record function. Press again to turn off.

11. Gravity Control
    To control the drone forward /backward /left side flight / right side flight by controlling the gravity of the smart device.
    Note: it may not work with some old version or without gravity sensor smart devices.

12. Switch
    Turn off / on the screen left and right joystick.

13. Speech Recognition
    Voice recognition: take off / landing /forward /backward/left/right.

14. Dual Camera Switch

15. VR Mode
    Provide VR screen for your 3D virtual reality headset (not included).

16. Camera Flip
    Flip the camera screen upside down on the smart device.

17. Gyro Calibrate
    Calibration of the drone.

18. 3600 Roll
    Press 3600 roll and drag left joystick to left or right to 3600 flip and roll.

19. Marking Flight
    Draw a path on the smart device screen. The drone will follow the path to flight.

20. Headless
    Turn on / off headless mode.

21. Take Off
    One key take-off.

22. Emergency Stop
    Press for the emergency stop.

23. Landing
    One key landing.

24. Throttle
    Ascent or descent of the drone.

25. Left / Right Roll

26. Turn left or right of the drone.

27. Forward / Backward

28. Move forward or backward of the drone.

29. Left / Right

30. Move left or right of the drone.

31. Forward / Backward Trim

32. Fine-tune forward or backward.

33. Left / Right Roll Trim

34. Fine-tune left/right roll.

35. Left / Right Trim

36. Fine-tune left / right.

USE WITH REMOTE CONTROL AND STREAMING VIDEO ON THE SMART PHONE

1. Turn on the drone and remote control.
2. Pairing the remote control with the drone.
3. Connect the smart device to the drone.
4. Open the app and play.

Note: When the drone is connected to the remote control and the smart device, it cannot be flown using the smart device. Only other functions like recording videos and taking photos can be done via the smart device.

HOLD THE SMART DEVICE ON THE REMOTE CONTROL

• Product battery: 3.7V 1200mah
• Remote control distance: 330 feet / 100 m
• Charging time: 100 minutes
• Flying time: 12 minutes
• Remote control battery: 3AA (not included)

CAUTION
This product is not a toy. This is not intended for use by children.
For your safety, please read the manual carefully and thoroughly before operating this product.
Each country has a legally defined frequency band that can be used for radio control devices.
Since the specifications of this product conform to the regulations of the country where this product is sold, this product cannot be used in any other country.

Fly Responsibly
The Federal Aviation Administration requires registration of many drones flown in the US, for hobby or commercial purposes.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For Remote Control
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

For Quadcopter
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>