FORTRESS Power FP-Envy 8K Local and Remote Monitoring Set-Up User Guide
- June 10, 2024
- FORTRESS Power
Table of Contents
FORTRESS Power FP-Envy 8K Local and Remote Monitoring Set-Up
Dongle Integration
-
Download the Envy Fortress Power APP Located both in Apple App Store and Google Play Store on a mobile device.
-
Plug the Dongle to the inverter while inverter is energized.
-
Connect to the Dongles Wi-Fi Network usually named BA****
-
Access the Envy App and Press the WIFI Module Connect Proceed to integrating the Dongle to the Home Wi-Fi by inputting the router’s SSID and Password. Server must be Set to North America. After clicking on Set, Click
HomeWifi Connect. The Dongle will display 3 solid LED’s if the connection was successful. This may take 1 minute after selecting HomeWifi Connect.
-
Select Register Tab
-
Complete End User Registration. Create End User username, password and make sure to select correct Continent,
Region, Country, Time zone and physical Address. The Customer (Installer) Code shall be provided by Fortress
Power to the Installer in which every installation done with this code will be reflected on the installer’s portal.
The serial number and pin of the dongle is located on the side of the dongle and the packaging box. -
Once Registered, the user can access the End User Portal where they can view direction of power flow, Solar, Battery, Export, and Consumption Data.
Inverter and End user Registration [Web Portal Method (Suggested)]
- Follow the Dongle Integration Process
- Search envy.fortresspower.io and Login Installer Username and Password credentials. If any have not been assigned, please contact Tech Support.
- Once Logged in, Go to Configuration>Station>Add Station (Create Plant Name). Please make sure you select the correct location and time zone.
- After Creating Station, Go to Dongles>Add Dongles>Input Dongle Serial Number and Pin (located in the packaging box and right side of the Dongle) and associate the dongle to the created station.
- Next, Go to Users and fill out the End-user profile and log in credentials.
- Once User is added, Associate End-user by User Management>Station Config> Select Station
- To give Read Only access to End-user, Select User Management>Edit>Read Only. Otherwise, leave Norm
Contact Information
For Technical Support Please Contact us at
Tech-Support Contact Information
Useful Links
Phone:
Tech Support877-497-6937
Tech Support (Spanish)215-710-8960
Support Tickets:https://www.fortresspower.com/support/
Warranty Submittal:
https://www.fortresspower.com/warranty/
References
- envy.fortresspower.io
- Fortress Power Battery Technical Support
- Warranty For Fortress Power Products - Secure Your Energy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>