Tefal FV2839E0 Steam Boost Iron Safety Instructions Guide
- June 10, 2024
- Tefal
Table of Contents
Tefal FV2839E0 Steam Boost Iron
Important safety recommendations
- Please read these instructions carefully before first This product has been designed for domestic and indoor use only. For any commercial use, inappropriate use, or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
- Never unplug the appliance by pulling the power Always unplug your appliance: before filling the water tank or rinsing the water tank, before cleaning the appliance, and after each use.
- The appliance must be used and placed on a flat, stable, heat-resistant When you place the iron on the iron rest, make sure that the surface on which you place it is stable.
- This appliance is not intended to be used by persons (including children) with reduced or impaired physical, sensory, or mental capacities or persons lacking appropriate knowledge or experience unless a person responsible for their safety provides either supervision or appropriate instructions concerning the use of the appliance prior to its
- Children should be supervised to ensure they do not play with the
- This appliance may be used by children aged 8 or over and persons lacking appropriate knowledge or experience or persons with reduced or impaired physical, sensory, or mental capacities provided that they have been thoroughly instructed regarding the use of the appliance, are supervised, and understand the risks Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
- The surfaces of your appliance can reach very high temperatures when functioning, which may cause Do not touch the hot surfaces of the appliance (accessible metal parts and plastic parts adjacent to the metallic parts).
- Never leave the appliance unattended when it is connected to the mains. Before storing the appliance, once it is unplugged, please wait until it has cooled down (around 1 hour).
- The appliance must not be used if it has been dropped if it has any visible damage if it leaks, or if it functions abnormally in any Do not attempt to dismantle your appliance: have it examined at an Approved Service Centre to avoid any danger.
- The iron should only be used with the base provided (for cordless irons).
- Check the electrical power for signs of wear or damage prior to If the electrical power cord is damaged, it must be replaced at an Approved Service Centre to avoid any danger.
- The iron must always be placed on its base and never on its heel (for cordless irons).
- Your iron and its base must be used and placed on a stable When you place the iron on its base, ensure that the surface on which the base is placed is stable.
- For your safety, this appliance conforms to all applicable regulations (Low Voltage Directive, Electromagnetic Compatibility, Environment, etc).
- Your steam iron is an electrical appliance: it must be used under normal conditions It is designed for domestic use only.
- Always plug your steam iron:
- into a mains circuit with a voltage between 220 V and 240 V,
- into an earthed electrical
- Connecting to the wrong voltage may cause irreparable damage to the appliance and will invalidate your guarantee. If you are using a mains extension lead, ensure that it is correctly rated (16A) with earth, and is fully extended.
- Completely unwind the power cord before plugging it into an earthed
- The soleplate of your iron can reach extremely high temperatures, and can cause burns: do not touch Never touch the electrical power cords with the soleplate of the iron.
- Your appliance emits steam, which can cause Always handle the iron with care, especially when ironing vertically. Never direct the steam towards people or animals.
- Never immerse your steam iron in water or any other Never place it under a running tap.
- The plug must be removed from the socket outlet before the water reservoir is filled with
Before first use
When you first use the iron, some smoke or a harmless odor may be produced or there may be a small discharge of particles. This will not affect the use of the iron and will disappear quickly.
What water to use?
Your iron has been designed to use tap water. However, the self-clean function must be performed regularly on the steam chamber to remove limescale. If your water is very hard, mix 50% tap water and 50% bottled demineralized water.
Never use water-containing additives (starch, perfume, aromatic substances, softeners, etc.), or condensation water (for example water from tumble dryers, water from refrigerators, water from air conditioning units, rainwater). This water contains organic waste materials or minerals that concentrate under the effect of heat and cause spitting, brown coloring, or premature aging of your appliance.
PLEASE RETAIN THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Problems with your iron?
| PROBLEM | POSSIBLE CAUSES | SOLUTIONS |
|---|---|---|
| Brown water is dripping from the soleplate and soiling your clothes. | You are | |
| using chemical descaling products. | Do not put any descaling product into the |
water tank.
You are not using the right water.| Perform a self-clean and consult the “What
water to use?” section.
The soleplate is dirty or brown and may soil clothes.| The temperature is too
high.| Clean the soleplate as indicated in the user guide Use a lower
temperature.
Your iron produces little or no steam.| Your iron has limescale.| Clean the
anti-limescale valve and perform a self-clean.
The soleplate is scratched or damaged.| You have positioned your iron flat on
the metallic iron support.
You have cleaned your soleplate with an abrasive cloth or steel wool.
| Always place your iron in the support base Clean the soleplate as indicated
in the user guide.
Your soleplate emits particles.| Limescale is starting to build up on your
soleplate.| Perform a self-clean.
Water drips from the holes in the soleplate.| You are using steam while the
iron is not hot enough.| Wait until the thermostat light goes out.
Specifications
- Brand: Tefal
- Model Number: FV2839E0
- Color: White & Red
- Product Dimensions: 23 x 23 x 12 cm; 1.3 Kilograms
- Power / Wattage: 2600 watts
- Voltage: 240 Volts
- Item Weight: 1.3 kg
- Frequency: 50 Hz
- Base material: Ceramic
FAQ’s
How long is the guarantee?
The manufacturer’s guarantee is two years.
What voltage is it running on?
I would have thought a standard mains voltage of 240
Why is my Tefal iron not heating up?
3 possible causes: There is no power in the mains socket: check that the plug is properly connected, or try to plug the iron into a different socket. Temperature control set too low: set the temperature control to a higher temperature.
How do you clean Tefal purely and simply?
Regularly clean the soleplate with a damp, non-metallic washing-up pad. For easier, non-corrosive cleaning of your iron’s soleplate, use a damp sponge on the soleplate while it is still warm. The stainless soleplate: Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.
How do I turn on my Tefal Express Steam?
To do this, set the iron temperature button to the maximum position. Leave the item on a hanger and gently pull the fabric with one hand. Press the steam control button intermittently and move the iron from top to bottom. As the steam produced is very hot, it softens the fibers and removes creases.
What temperature is a Tefal steamer?
The steam in the steam cooker is water boiling temperature, approximately 100°C.
Why is my Tefal steam iron not releasing steam?
There may not be enough water left in the tank. Fill it up to the MAX level. Your iron needs to get hot enough to turn water into steam. Give your iron a few minutes to heat up before using it.
Can you use Tefal iron without water?
Yes, Simply remove the water from your steam iron by unplugging the iron, letting it cool, and then emptying the water tank. If your iron has a dry/steam setting or something similar, turn the dial to this setting; if it lacks a dry setting then select the “MIN” setting.
How do you use a steam iron effectively?
“Place the steamer at the top of the garment and gently work your way down,” recommends Sokolowski. For best results, pull down on the bottom of your garment when steaming, ensuring the fabric is taut. This way, as the fibers are steamed, they’re pulled straight and will dry into a smooth, wrinkle-free surface.
What water do you use in a Tefal steam iron?
Tap water: Your appliance has been designed to function using untreated tap water. If your water is very hard, we recommend you use a mix of 50% untreated tap water and 50% distilled water available in most shops.
How do you clean a Tefal iron?
In order to keep your Tefal Access Easy clean and running, wipe the soleplate with a damp smooth cloth. Do not use detergents or cleaners and never ever wipe the surface with a metal pad as it will damage it.
Where does the water go in a Tefal steamer?
Pour the water directly into the water tank, up to the maximum level. Place the juice collector flat on the base. The baskets are numbered : 1, 2 and 3 (depending on the model). Always place the baskets in the right order.
Download this PDF Link:Tefal FV2839E0 Steam Boost Iron Safety Instructions Guide