Tradition Flowerpot VP9 Verner Panton Wireless Rechargeable Lamp Instructions
- June 10, 2024
- Tradition
Table of Contents
Tradition Flowerpot VP9 Verner Panton Wireless Rechargeable Lamp
Congratulations on your new Flowerpot, designed in 1968 by Verner Panton. We hope you will enjoy using this product. Please follow these instructions to ensure correct installation. If you have any questions or comments, please do not hesitate to contact us by mail at: info@andtradition.com
Flowerpot VP9 Verner Panton 1968
Please read these instructions carefully and retain them for future reference to ensure that the product is used correctly. For your own safety, please study each step of this instruction manual first. &Tradition is not responsible for any faults or damages caused by not following these in -strictions correctly. Do not modify this product in any way.
Contents
A Flowerpot lamp
B USB charging cable
Safety precautions
- Dispose of plastic bag from packaging and do not allow children to play with it.
- Keep product well out of children’s reach.
- This lamp is for indoors use only.
- Consult a professionally qualified electrician if in any doubt.
- Do not place the cable within reach of small children or anywhere with a risk of falling over it.
- Batteries must be disposed of according to local environmental laws for waste disposal.\
Cleaning instructions
- Wipe the surface with a soft, damp sponge or cloth, and wipe immediately with a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit, turpentine, household glass cleaner or cellulose thinner.
Important
&Tradition will not take any responsibility for accidents or injuries that
occurs due to use of incorrect battery/LED light bulb.
The battery must be removed from the lamp before it is scrapped; the appliance
must be disconnected from the supply mains when removing the battery; the
battery must be disposed safely.
For LED bulb and battery information or inquiry, please do not hesitate to
contact &Tradition via mail on info@andtradition.com.
Step 1
The lamp is delivered fully assembled.
Step 2
Before use, the battery in the lamp must be fully charged. Plug the micro USB
cable into the USB port on the bottom of the lamp. Connect the USB cable to a
power supply.
&Tradition replacement battery can be purchased upon request.
Step 3
When charging, a red LED light will appear next to the
USB port. When the lamp is fully charged the red light will turn green.
Step 4
The light intensity of the lamp can be adjusted by touching the dimmer knob on
the top of the lamp.
The lamp has 3 light intensity levels: 100%, 50% and 20%. &Tradition
replacement LED unit can be purchased upon request.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>