Tradition Mist AP15 Mist Pendant Light Instructions

Tradition Mist AP15 Mist Pendant Light

Product Information

Specifications:

• Model: Mist AP15
• Designer: All the Way to Paris
• Year: 2023
• Interior Use Only
• Bulb Type: G9 (maximum 20W, bulb not included)

Product Usage Instructions

Safety Precautions:

• Dispose of plastic bag from packaging and keep out of reach of children.
• Keep product well out of children’s reach.
• The lamp is only intended for interior use.
• Do not attempt installation of product if you are not competent to do so yourself.
• Consult a professionally qualified electrician if in any doubt.

Cleaning Instructions:

• Wipe surface of lamp shade with a soft, damp sponge or cloth.
• Do not use any abrasive cleaning tools such as steel wool, scouring sponges, or stiff brushes.
• Never use strong cleaning agents such as white spirit, turpentine, household glass cleaner, or cellulose thinners.

Installation Steps:

1. Ensure power supply is turned off and remove any existing lamp fitting. Locate the supply cable and ensure it is ready to be fitted to the connector block. Mount the metal bracket (C) securely in the ceiling with screws and wall plugs appropriate for the ceiling of installation.
2. Use the marked-up area in the canopy to make a hole for the cord outlet.
3. Determine the right suspension height for the lamp: Pass the electrical cord through the strain relief of the metal bracket (C). Once you have the desired suspension height, tighten the two screws of the strain relief.
4. Assemble the wires: Use the terminal box inside the connection box (D) to connect the wires from the pendant with the wires from the power supply. Close the connection box and place it inside the canopy.
5. Screw the canopy onto the metal bracket.
6. Install the light bulb.
7. Mount the shade: Securely screw the shade onto the metal lamp holder.
8. Adjust the lamp: Carefully move the cord at the top of the metal lamp holder to adjust the lamp while ensuring that the shade hangs straight.

Frequently Asked Questions (FAQ)

• Q: Can I use a bulb higher than 20W?
  A: No, it is recommended to use a G9 bulb with a maximum wattage of 20W as exceeding this limit may cause damage to the lamp.

• Q: Is the Mist lamp suitable for outdoor use?
  A: No, the Mist lamp is designed for indoor use only and should not be used outdoors.

• Q: Can I use abrasive cleaners on the lamp shade?
  A: No, it is advised not to use abrasive cleaning tools on the lamp shade as they may damage the surface. Use a soft, damp sponge or cloth for cleaning.

Congratulations on your new Mist lamp, designed in 2023 by All the Way to Paris. We hope you will enjoy using this lamp. Please follow these instructions to ensure correct installation. If you have any questions or comments, please do not hesitate to contact us by mail at: info@andtradition.com

Please read these instructions carefully and keep them
for future reference to ensure that the product is used correctly. For your own safety, please study each step of this instruction manual first. &Tradition is not responsible for any faults or damage caused by not following these instructions correctly. Do not modify this product in any way.

Contents

• A Metal lamp holder
• B Shade
• C Canopy with metal ceiling bracket
• D Connection box

Tools needed

• Bulb type G9
• Small flat headed screwdriver for wiring

Safety precautions

• Dispose of plastic bag from packaging and keep out of reach of children.
• Keep product well out of children’s reach.
• The lamp is only intended for interior use.
• Do not attempt installation of product if you are not competent to do so yourself.
• Consult a professionally qualified electrician if in any doubt.

Cleaning instructions

• Wipe surface of lamp shade with a soft, damp sponge or cloth.
• Do not use any abrasive cleaning tools such as steel wool, scouring sponges or stiff brushes.
• Never use strong cleaning agents such as white spirit, turpentine, household glass cleaner or cellulose thinners.

For indoor use only G9 maximum 20W Bulb not included

Instructions

Step 1

• Ensure power supply is turned off and remove any existing lamp fitting.
• Locate the supply cable and ensure it is ready to be fitted to the connector block.
• Mount the metal bracket (C) securely in the ceiling with screws and wall plugs, appropriate for the ceiling of installation.

Step 2

• Use the marked up area in the canopy to make a hole in it for the cord outlet.

Step 3

• To determine the right suspension height for the lamp, pass the electrical cord through the strain relief of the metal bracket (C). When you have the desired suspension height of the lamp, tighten the two screws of the strain relief.

Step 4

• Use the terminal box inside the connection box (D) to assemble the wires from the pendant with the wires from the power supply. Close the connection box and place it inside the canopy.

Step 5

• Screw the canopy onto the metal bracket.

Step 6

• Install the light bulb.

Step 7

• Mount the shade onto the metal lamp holder, by carefully screwing it on.

Step 8
Carefully move the cord at the top of the metal lamp holder to adjust the lamp while making sure that the shade is hanging straight.

Mist AP16
All the Way to Paris 2023

****Congratulations on your new Mist lamp, designed in 2023 by All the Way to Paris. We hope you will enjoy using this lamp. Please follow these instructions to ensure correct installation. If you have any questions or comments, please do not hesitate to contact us by mail at: info@andtradition.com

Please read these instructions carefully and keep them for future reference to ensure that the product is used correctly. For your own safety, please study each step of this instruction manual first. &Tradition is not responsible for any faults or damage caused by not following these instructions correctly. Do not modify this product in any way.

Contents

• A Metal lamp holder
• B Shade
• C Canopy with metal ceiling bracket
• D Connection box

Tools needed

• Bulb type E27
• Small flat headed screwdriver for wiring

Safety precautions

• Dispose of plastic bag from packaging and keep out of reach of children.
• Keep product well out of children’s reach.
• The lamp is only intended for interior use.
• Do not attempt installation of product if you are not competent to do so yourself.
• Consult a professionally qualified electrician if in any doubt.

Cleaning instructions

• Wipe surface of lamp shade with a soft, damp sponge or cloth.
• Do not use any abrasive cleaning tools such as steel wool, scouring sponges or stiff brushes.
• Never use strong cleaning agents such as white spirit, turpentine, household glass cleaner or cellulose thinners.

For indoor use only E27 maximum 40W Bulb not included

Step 1

• Ensure power supply is turned off and remove any existing lamp fitting.
• Locate the supply cable and ensure it is ready to be fitted to the connector block.
• Mount the metal bracket (C) securely in the ceiling with screws and wall plugs, appropriate for the ceiling of installation.

Step 2

• Use the marked up area in the canopy to make a hole in it for the cord outlet.

Step 3

• To determine the right suspension height for the lamp, pass the electrical cord through the strain relief of the metal bracket (C). When you have the desired suspension height of the lamp, tighten the two screws of the strain relief.

Step 4

• Use the terminal box inside the connection box (D) to assemble the wires from the pendant with the wires from the power supply. Close the connection box and place it inside the canopy.

Step 5

• Screw the canopy onto the metal bracket.

Step 6

• Install the light bulb.

Step 7

• Mount the shade onto the metal lamp holder, by carefully screwing it on.

Step 8

• Carefully move the cord at the top of the metal lamp holder to adjust the lamp while making sure that the shade is hanging straight.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>