Bintracker MOBI-8C-010 Mobi Scale Instructions
- June 13, 2024
- Bintracker
Table of Contents
MOBI-8C-010 Mobi Scale
Instructions
MOBI-8C-010 Moby Scale
Bintracker (Mobi): User Guide
Using Bintracker
To begin using the Mobi – Mobile Scales:
Power ‘On’
- Select the Green button to turn on the Mobi scales.
- Ensure Bintracker app is installed and open on device.
Mobi Instructions
Collect Waste
- Collect & Weigh waste by tying up bags and hooking them onto the Mobi scales.
- Follow the in-app steps on the next page.
The steps are:
| Select | Scan |
|---|
|
Select ‘Scan QR Code’| Scan Bin/Bag QR Code
in-App steps
Bluetooth must be turned ON
| Input | Success! |
|---|
|
Select a ‘Collection Point’ and place bin/bag on scales, the weight will auto-
populate| Select ‘Send’ to Submit
Select ‘Contaminated’ and take a photo if there is contamination
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For Bluetooth
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
For wireless charger
Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>