HALCYON P700 4KNS LED High Bay Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON P700 4KNS LED High Bay
Product Name: LED High Bay
Model #: P700 4KNS
Description: 77/96/111/132/1 SOW LED, IP65, 4000K Rated Voltage:
220-240V~, 50/60Hz
INSTALLATION
- Turn power off.
- Use a flat-blade screwdriver to open the plug, change power by setting dip switches according to power setting table, and then close the plug tightly.
- Install the suspension kit.
- Plug in the power cord.
- Switch luminaire on to test luminaire functions correctly and is electrically safe.
Installation note: Do not install on the same circuits as Metal halide,
Fluorescent and other “Low power factor” devices.
When installed on the same circuit it can cause flickering and/or premature
failure of the “high power factor” electronic drivers. The harmonic distortion
from low power factor devices alters the Waveform of the AC supply which can
cause componentry in high power factor electronic drivers to resonate, run
over temperature and fail after prolonged exposure.
WARNING: FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED CLOSE TO
CURTAINS OR OTHER COMBUSTIBLE MATERIALS
Documents / Resources
|
HALCYON P700 4KNS LED High
Bay
[pdf] Instruction Manual
P700 4KNS LED High Bay, P700 4KNS, LED High Bay, High Bay
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>