iclever BTH18 LED Lights Kids Wireless Headphone User Manual

June 14, 2024
iclever

iclever BTH18 LED Lights Kids Wireless Headphone

Product Information

The product is a Bluetooth device that can be used for various purposes such as audio streaming, hands-free calling, and wireless data transfer. It can be paired with compatible devices such as smartphones, tablets, and computers to enable wireless communication.

Product Usage Instructions

To use the product, follow these steps:

  1. Power ON the device by pressing the designated power button.
  2. To turn OFF the device, press and hold the power button until it shuts down.
  3. To enter the pairing mode, refer to the instructions mentioned for your specific language (EN 5, DE, FR, ES, IT, CN).
  4. Once the device is in the pairing mode, it will be ready to pair with another Bluetooth device.
  5. On your compatible device, enable Bluetooth and search for available devices.
  6. Select the product from the list of available devices to initiate the pairing process.
  7. Once the pairing is successful, you will see a confirmation message indicating “Connected” (EN 8, DE 14, FR 20, ES 26, IT 32, CN 37).
  8. If the Bluetooth connection gets disconnected, refer to the instructions mentioned for your specific language (EN 7, DE, FR, ES, IT).
  9. If the battery level is low, an alarm will notify you. Please recharge or replace the battery as per the manufacturer’s instructions (EN 6, DE, FR, ES).

Note: The exact steps and instructions may vary depending on the specific product model. Please refer to your product’s user manual for detailed instructions specific to your device.

Package Contents

Product Diagram

iclever-BTH18-LED-Lights-Kids-Wireless-Headphone-2

ON/OFF

  1. Power ON: Press and hold the power button for 2 seconds and you will hear the prompt “Power On” with the RGB light going on. Once the headphone is turned on, it’ll enter the Bluetooth pairing mode.
  2. Power OFF: Press and hold the power button for 4 seconds and you will hear the prompt “Power Off” . When the prompt is heard, the headphone is turned off.

Bluetooth Pairing

  1. When the headphone is powered on, its RGB light will go on. When the headphone enters the pairing mode, its indicator light will flash in red and blue alternatively.
  2. Activate the Bluetooth function on your Bluetooth-enabled device. Select the “iClever-BTH18” from the list of Bluetooth devices found by your device and connect.

Light Mode Operation

There are 2 light modes available. When the headphone is powered on, the RBG light will go on in breathing pattern. Press the light mode button to switch to a solid single-color light. Press the light mode button again to turn off the light mode.

Volume Limit Gear Switching

The default volume of the initial power on and restore factory setting is 85dB. Press the MFB and light mode button simultaneously to change the volume limit. Each press leads to one volume limit change, with the voice prompt of the corresponding volume.

Note:
The volume limit setting will sequentially cycle in accordance with 85 dB, 94dB, and 74dB. Once your desired volume limit is set, it will keep until manually changed.

Audio Sharing
This headphone boasts an audio-sharing function. While the BTH18 is connecting a device through Bluetooth, use the included 3.5mm audio cable to connect another device and share the audio.

Operation of Buttons

Next Track: Press the MFB twice.
Previous Track: Press the MFB 3 times.
Play/Pause: Press the MFB.
Answer/ End Calls: Press the MFB.
Reject Calls: Press and hold the MFB for 2s.
Activate/ Deactivate SIAI: Press and hold the MFB for 2s.

Clear the Paring List:

| Press and hold the MFB and light mode button simultaneously for 4 seconds in the power-on state to clear the pairing list; then the headphone

will clear the pairing list andenter pairing mode

automatically with the indicator light flashing in red and blue alternatively.

Voice Prompt

Power ON Power on
Power OFF Power off
Entering Paring Mode Ready to Pair
Pairing Pairing
Successful Bluetooth Connection Connected
Bluetooth Disconnection Disconnected
Low Battery Alarm Battery Low

Specifications

Frequency Range 2.4GHz-2.482GHz
Max. Transmission Power 4dBm
Type of Battery Li-Polymer Battery
Battery parameters 3.7Vdc 500mAh
Charging parameters DC 5V lA

How to Charge the Headphone

Connect the Type-C cable to the Type-C port on the headphone, and a 5V power outlet (a power adapter is not included). when charging, the headphone will turn off automatically and the RGB light goes off.
The indicator light will glow red to indicate charging. When the head- phones are fully charged, the indicator light will always glow in blue.

Warning

  1. If the product is damaged, please stop using it
  2. When the charging cable USB interface is hot, please replace it in time
  3. Keep away from high temperature and fire source

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

IC Caution
This device complies with Industry Canada licence-exempt RSS stan- dard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any inter- ference, including interference that may cause undesired operation of the device.

DOC
Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Wireless Headphones iClever BTH18 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address: https://files.iclever.com/BTH18-DOC-EN.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals