TOBENONE UDS015DS USB-C Triple-Display Docking Station User Guide
- June 10, 2024
- TOBENONE
Table of Contents
TOBENONE UDS015DS USB-C Triple-Display Docking Station
Save More on Free Warrantv Extended
Register your product for a FREE upgrade to a 24-Month Warranty:
www.tobenone.com/warranty
THANK YOU!
Thank you for your purchase of the Tobenone Triple-Display Docking Station
UDS-015D-Silver. Our dock provides the ability to connect three I monitors
through two HDMI and one VGA interface SD&Micro SD Card Reader, 3.5mm Audio
Microphone, USB-A 3.0, and USB-C PD 3.0. RJ45 Gigabit Ethernet to your USB-C
laptop via one USB-C cable.
Ports and Connectors
Front:
- Host: Connect the laptop
- LED indicator
- SD&Micro SD: Read: 50-104MB/s, Write: 30-80MB/s
- 3.5mm Audio Microphone
- 4*USB 3.0: 5Gbps, 5V/[email protected]
Back:
- HDMI 1: Up to 4K@30Hz on DPl .2, 4K@60Hz on DPl .4
- HDMI 2; Up to 4K@28Hz on DPl .2, 4K@30Hz on DPl .4
- VGA: Up to1080P
- PD 3.0: Connect the Power adapter
- RJ45 Gigabit Ethernet: Up to 1 00OMbps
INSTRUCTION STEPS
-
Step 1 : Connect the Power Cord to the 65W Power Adapter
-
Step 2 : Connect the 65W Power Adapter to PD 3.0(®)
-
Step 3; Connect the dock and your laptop via USB C to USB C cable as provided
-
Step 4 : Connect monitors via dual HDMI(®®) and VGA(@), cables(HDMI to HDMI/ VGA/DP, VGA to VGA/HDMI/DP) are not included
-
Step 5 : Install initiate lnstantView to display:
-
Firstly, connect the docking station to the laptop via USB C cable, and you will see a disk named “INSTANTVIEW”
-
Double-click and open the file, according to your system choose the proper application and complete the driver installation within seconds
-
For macOS, the opp will require a screen recording permission to capture pixels and send them to your external monitors Apple Menu-> System Preference->Security&Privacy-> select “Privacy” tab->5coll to find “Screen Recording’ and check “macOS instant view
NOTE : The INSTANVIEW app doesn’t store or record any screen content. -
Click lnstantview APP, and it will enable external displays immediately
-
-
Step 6: Attach USB 3.0 D, devices to the front USB 3.0(®). Insert SD card and Micro SD card into SD/TF slot(@)
-
Step 7 : Connect the speaker, headphones, or microphone to the 3.5mm Audio Microphone(@). Connect the Ethernet cable to the RJ45 Ethernet port(@))
Troubleshooting
No Display output via HDMI
- Please ensure your laptop’s USB-C port supports Power Delivery, DisplayPort, and Data transfer
- Please check if the connection between the monitors, dock and laptop is tight
- Please use a standard HDMI cable, HDMI to HDMI is recommended
NO audio output from the monitor
- Please make sure your monitor supports the audio output function
- Set the external monitor as the default audio output device
Register your product for a FREE upgrade to a 24-Month Warranty: www.tobenone.com/warranty For any inquiries, please contact us:[email protected]