medisana 2227961 ViFit Run Fitness Tracker User Manual
- June 4, 2024
- medisana
Table of Contents
medisana 2227961 ViFit Run Fitness Tracker User Manual
ViFit Run
- USB port (charge battery)
- Touch sensor
WARNING! Risk of swallowing by small children! Children are not allowed
to play with the device. Keep it away from children.
WARNING! Danger of fire/explosion or chemical burns! The item contains a
lithium-ion battery. This must not be removed, taken apart, thrown into a fire
or short circuited.
CAUTION! Possible property damage! Do not drop the device and protect it
from impact. Do not expose the device to extreme temperatures or extreme
temperature fluctuations. Protect the device from directsunlight and dust.
When cleaning, do not use any strong chemicals, or aggressive or foaming
cleaning materials. Protect the display from hard, scratching objects.
CAUTION! Do not dispose of the device in the household waste! If you have any questions, please contact your municipal waste disposal authority. Do not dispose of spent batteries in domestic waste, rather in special waste or at a battery collection point at your retailer! The packaging is recyclable or can be recycled into raw materials. Please dispose of unwanted ackaging material properly.
We hereby declare that the ViFit Run ActivityTracker, Item no. 79492 complies with the basic requirements of European Directive 2014/53/EU. The complete EC Declaration of Conformity can be requested from medisana GmbH, Carl-Schurz- Str. 2, 41460 Neuss, Germany or can be downloaded from the medisana homepage. Subject to technical changes in the course of constant product development.
Activate device
Before use, connect the device to a USB charger in order to charge it for
activation.
The progress bar changes from empty to full, to indicate the complete
activation as below.
-
After activation, the battery is charged.
-
If the battery charge of the device falls below 10%, the adjacent symbol will be ticked to remind you to charge the battey.
Connect with the VitaDock+ App
Download the VitaDock+ App free from the AppStore or the Google Play Store.
Activate Bluetooth® on your iOS or Android device. Start the App.Tap the
Bluetooth® icon to go to the device selection.
Scroll down until ViFit Run is displayed in the device list.
Tap the arrow next to the illustration to start the setup process.
Accessing functions
Briefly touch the touch sensor to run through the display of each function.
You can always return to the respective initial display by pressing and
holding!
Date and time display
Press and hold: display current weather conditions In the weather
conditions display: press briefly to display the current temperature and the
temperature range.
Note: The feature can only be accessed if the device has been connected
to the VitaDock+ App
Step counte
Press and hold: Open the display with details on sports performance. Press
briefly: Switch between the performance data (calories burned, distance,
active time and current percentage of the daily target).
Heart rate
Press and hold (3 seconds): Start the heart rate measurement.
Note: For the best result, the bracelet must be worn tightly. If this is
not the case, the device will vibrate gently and prompt you to check the fit
of the device on your wrist.
During the heart rate measurement, 2 to 5 different training zones are
displayed, depending on the rate of change of the heart rate.
Press the touch sensor again for 3 seconds to stop the heart rate measurement
and return to the main screen.
Stopwatch and reminder function
Press and hold: Start the stopwatch
Press briefly: Stop or resume timing.
End the stopwatch function: Stop the stopwatch first, then press and hold on
the touch screen.
You can set the reminder functions (tablet intake, movement reminder) via the
VitaDock+ App.
Messages (only with existing Bluetooth® connection to your iOS or Android
device)
The device displays messages immediately when they are received. The
messages are stored under the menu item “Message”.
In this way, the device stores up to 20 messages. Thereafter, the oldest of
the messages stored is deleted or overwritten.
Messages from the following sources are displayed: SMS, WhatsApp, Facebook
Messenger
Calls: When the notification of an incoming call is displayed, you can
reject the call by pressing and holding the touch sensor. If you press the
touch sensor briefly, the notification including vibration will stop, but the
call will not be rejected on your smartphone.
Bluetooth®activate/deactivate
Press and hold: Bluetooth® activate/deactivate
Sleep mode (Sleep tracker)
The device automatically detects if you are asleep and records whether your
sleep is restless or quiet. However, you can also manually set a period in
which the sleep mode should be activated via the VitaDock+ App.
Technical data
- Battery capacity: 110 mAh
- Charging time: 1.5 hours
- Battery life: 7-10 days (standby)
Customer Support
medisana GmbH
Carl-Schurz-Str. 2
41460 NEUSS
GERMANY
Email: info@medisana.de
Internet: www.medisana.de
The service address can be found on the separate attachment sheet.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>