HALCYON P700 SMB LED High Bay Surface Mount Kit Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
INSTALLATION INSTRUCTIONS
Product Name: LED High Bay Surface Mount Kit
Model #: P700 SMB
P700 SMB LED High Bay Surface Mount Kit
- Take out the mounting bracket and M6x10 screws, M6 flat washers, M6 spring washers, and M6 serrated washers in the accessories package, and assemble as shown in the picture.
- Tighten the screws with an alien key.
Installation note: Do not install on the same circuits as Metal halide,
Fluorescent and other “Low power factor” devices. When installed on the same
circuit it can cause flickering and/or premature failure of the “high power
factor” electronic drivers.
The harmonic distortion from low power factor devices alters the Waveform of
the AC supply which can cause componentry in high power factor electronic
drivers to resonate, run over temperature and fail after prolonged exposure.
WARNING: FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED CLOSE
TO CURTAINS OR OTHER COMBUSTIBLE MATERIALS.
56210835 V1.0
Documents / Resources
|
HALCYON P700 SMB LED High Bay Surface Mount
Kit
[pdf] Instruction Manual
P700 SMB LED High Bay Surface Mount Kit, P700 SMB, LED High Bay Surface Mount
Kit, High Bay Surface Mount Kit, Bay Surface Mount Kit, Surface Mount Kit,
Mount Kit, Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>