S-TRACK Ostrich BD44 4 Channel Bluetooth Transmission Panel Owner’s Manual
- June 10, 2024
- S-TRACK
Table of Contents
S-TRACK Ostrich BD44 4 Channel Bluetooth Transmission Panel
Product Information
- Product Name: Ostrich BD44
- Input Interfaces: Dante 4, Bluetooth 5.0, Stereo, RCA2, 3.5mm TRS*1
- Output Interfaces: Dante 4, Bluetooth 5.0, Stereo, 3.5mm TRS1
- Power Consumption : 2W
- Frequency Response: 20Hz-20kHz
- Total Harmonic Distortion and Noise (THD-N): -90dB
- Signal-to-Noise Ratio: 100dB
- Background Noise: 310g
- Operating Temperature: -10°C to 40°C
- Operating Humidity: 5%-95%
- Contact Information: +400-900-2726, service@s-track.cn,
www.s-track.cn, 9/F, Block B, Building 1, Shangzhi Technology Park, Fenghuang Street, Guangming District, Shenzhen, China
Product Usage Instructions
- Connect the audio source to the input interface using any of the available input options such as Dante, Bluetooth 5.0, RCA or 3.5mm TRS.
- Connect the output interface to the audio receiver or amplifier using Dante, Bluetooth 5.0 or 3.5mm TRS.
- Ensure that the power supply is connected and the device is turned on.
- Adjust the volume and other settings as per your requirement.
- The device can be used in any environment with an operating temperature between -10°C to 40°C and operating humidity between 5%-95%.
- For any further assistance or support, please refer to the contact information provided or visit the website mentioned.
PRODUCT FEATURES
- Audio transmission and the power supply of this equipment through a network cable to solve, support Bluetooth wireless audio interface and analog audio interface, simple application, the main applicable scenarios are teleconferencing, audio long-distance transmission and other application scenarios.
- Power supply and transmission in one, using PoE network switch power supply, power supply and audio transmission through the network cable.
- Good compatibility, adaptable to a variety of cell phones, tablets, computers and other devices.
- Support Bluetooth call bridging function for conference purposes.
SPECIFICATION
| Input Interface | Dante 4, Bluetooth 5.0, Stereo, RCA2, 3.5mm TRS*1 |
|---|---|
| Output Interface | Dante 4, Bluetooth 5.0, Stereo, 3.5mm TRS1 |
| Power Consumption | 2W |
| Frequency Response | 20Hz-20kHz |
| THD-N | <0.005% |
| Signal-to-noise ratio | >100dB |
| Background noise | -90dB |
ABOUT COMPANY
- 400-900-2726
- 9/F, Block B, Building 1, Shangzhi Technology Park, Fenghuang Street, Guangming District, Shenzhen, China
- service@s-track.cn
- www.s-track.cn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>