LUMME LU-1709 Mini Oven User Manual

: June 10, 2024
: LUMME

Table of Contents

Parts list
CAUTION
USING THE APPLIANCE
CLEANING AND MAINTENANCE
SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LUMME LU-1709 Mini Oven User Manual

Parts list

Housing
Door handle
Temperature adjustment knob
Heating mode adjustment knob
Timer
Indicator light
Bake tray 8.Wire rack
Bake tray handle
Crumb tray

CAUTION

Read this manual carefully before using the appliance and save it for future reference. When using electrical appliances, basic precautions should always be followed, including the following:

The appliance is designed for domestic cooking and heating only in accordance with these operating instructions.
Before the first use, check the device specifications and the power supply in your network. Use the appliance only on the voltage specified on the identification plate.
The device must always be connected to a grounded socket.
It is not intended for industrial use.
Use the device in a well ventilated room with at least 15 cm. space on each side for normal air circulation and heat removal.
Do not allow the operating device to come into contact with fusible or flammable materials, fabrics, curtains, etc.
For indoor use only. Use only for domestic purposes according to the instruction manual. Do not use or store the unit in damp and moist areas where it may come in contact with water.
Do not place or use the unit on or near other household appliances (a hot gas or electric burner, etc.)
Do not use the appliance near explosives or flammable materials.
Do not use with damaged cord, plug or other injuries. Do not move the device by holding the cord.
Keep the power cord away from sharp edges and hot surfaces. Do not pull the cord. Always take the socket not the wire. Do not reel the cord around the device housing.
Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center.
Excessively large products, vacuum-packaged products, cardboard, paper, plastic wrapping/ware/baking moulds must not be cooked in the appliance as this can cause a fire.
Do not heat oil in the appliance.
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
Place the appliance on a flat, stable and heat-resistant surface that can support the weight of the appliance with food and cooking utensils.
Incorrectly assembled device may cause fire, electric shock or other injury.
DANGER: Do not cover the device with anything while it is in operation! Do not place any objects on it!
To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
Do not touch the appliance, the power cord and the plug with wet hands!
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Keep out of the reach of children. Close supervision is necessary when this appliance is to be used by or near children.
Do not switch on an empty device without food for more than 15 minutes.
Maximum allowable continuous operating time is 4 hours.
Do not allow products to come into contact with heating elements.
Keep water away from hot glass as it may crack.
Do not physically expose the door or glass – do not place any objects or lean on it.
Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
WARNING: This device heats up during use. The temperature of the door or other surfaces may be exceeded when the appliance is in operation. Do not touch the hot surfaces or heating elements inside to avoid burns. Use special accessories, kitchen tackles or mittens.

WARNING: Failure to observe safety precautions may result in fire, electric shock, or burns. Damage to the appliance caused by improper use will exempt the seller from warranty service.

BEFORE THE FIRST USE

Unpack the appliance and remove all packaging materials and labels. Store warning labels (if available) and the product serial number plate on the housing!
Clean the device with a damp cloth, clean the accessories in soapy water rinse thoroughly and dry.
Make sure that there are no packaging materials or foreign objects (including products) inside.
Switch on all heating elements by selecting heating mode , set the maximum temperature to 230°C and timer for 15 minutes. Some smoke or odour may be produced at the first switc hon, this is normal and not a malfunction. At the end of this cleaning procedure, let the unit cool down, after which it will be ready for operation

USING THE APPLIANCE

SWITCHING ON

Make sure the device is switched off (all three knobs are in the «Выкл/OFF» position).
Connect the device to the power supply.
Install a bake tray and/or wire rack, place the food. If the food is cooked on the wire rack, place the bake tray on the bottom level to prevent oil/grease/juice droplets from getting onto the heated surfaces.
To switch the device on, turn the temperature adjustment knob “3” to set the desired temperature from 70 to 230°C.
Then turn the heating mode selection knob “4” to set one of the 4 heating modes.
Set the timer from 0 to 60 minutes by turning the timer setting knob “5”.
The light indicator “6” will illuminate and the device starts working.
After the set time has elapsed, an audible signal will sound, the indicator light will go out, and the device will stop working. If the products are not ready yet, set the additional operating time by turning the timer knob. DO NOT USE THE APPLIANCE MORE THAN 4 HOURS WITHOUT A BREAK

HEATING MODE SELECTION

To set the desired heating mode, turn the heating mode adjustment knob “4” to one of the positions:

the upper heating elements operating mode.
the upper & lower heating elements operating mode.
all heating elements & convection operating mode are off.
the lower heating elements operating mode.
convection operating mode.

TIMELESS OPERATION

Turn the timer knob to the left of the OFF position to the range indicated by the symbol , then the device will operate without time limit..
Set the desired temperature from 70 to 230°C and one of the 4 heating modes.
The light indicator will illuminate and the device will start working.
To turn off the device, turn the heating mode adjustment, temperature adjustment and timer knobs to the “ВЫКЛ/OFF” position, an audible signal will sound, the light indicator will go out, the device will stop working.
CAUTION: DO NOT LEAVE THE DEVICE UNATTENDED WHEN OPERATING IN THE “TIMERLESS OPERATION ” MODE!
DO NOT USE THE APPLIANCE MORE THAN 4 HOURS WITHOUT A BREAK

SWITCHING OFF

The device will automatically turn off when the time set on the timer expires.
The device can be switched off at any time by turning the heating mode adjustment, temperature adjustment and timer knobs to the “ВЫКЛ/OFF” position. An audible signal will sound, the light indicator will go out, the device will stop working.
WARNING: Always turn off the unit when cooking is finished.
Disconnect the appliance from the power supply. Do not pull on the wire, only hold on to the plug. Always allow the appliance to cool down completely before you put it away.

CLEANING AND MAINTENANCE

Before cleaning, always unplug the appliance.
Use wet cloth to clean the device. Do not immerse the appliance in water or other liquids.
Clean accessories in soapy water and dry.
Do not use chemical and abrasive cleaners for cleaning.
Recommended to clean the device right after operating

SPECIFICATION

Power supply| Power, W| Capacity, L| Net weight / Gross weight, kg| Package size (L х W х H), mm
---|---|---|---|---
230 V ~ 50 Hz| 1800| 33| 7,4 / 8,2| 52 х 383 х 380

Producer:
COSMOS FAR VIEW INTERNATIONAL LIMITED Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China Made in China

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device. Current information about service centers is available on the website http://lumme-ru.com/

LUMME Logo