VACLIFE VL732 Cordless Vacuum Cleaner User Manual

October 29, 2023
VacLife

VACLIFE logo

VACLIFE VL732 Cordless Vacuum Cleaner

VL732
CORDLESS VACUUM CLEANER
USER MANUAL

VL732 Cordless Vacuum Cleaner

THANK YOU FOR YOUR PREFERENCE FOR VACLIFE
If you have any problems with our product, please feel free to contact us.
support@vaclife.com
NOTE
Please check if there are accessories damaged or lost.
If there are, please contact our customer service team to get a replacement or a full refund.
support@vaclife.com

IMPORTANT INSTRUCTIONS

To prevent any physical injuries and property damages caused by improper operation, please read this manual carefully before using the appliance and keep it for future reference.

  • Keep the appliance out of the reach of children and pets.
  • Make sure the appliance is well-assembled before use.
  • Do not place the product on uneven or unstable surfaces such as chairs and tables.
  • Keep the appliance away from fire, heat, or direct sunlight.
  • Do not use the appliance for cleaning wet rubbish, corrosive liquids, detergents, flamming or smoking items, hard or sharp objects, etc.
  • Do not use it outdoors. Use the appliance on even surfaces.
  • Do not disassemble or maintain the motor, or the battery pack by yourself.
  • Use original adapter and accessories ONLY.
  • Fully charge the appliance before the first use. And make sure the appliance is powered off before charging. Charge the appliance in 10-40 C ( 50-104 F ) environments.
  • Do not block the air outlet when operating.
  • Do not touch the adapter or the power cord with wet hands.
  • The dust cup is not washable. Please keep the dust cup dry before use.
  • Let the filters air dry completely before putting them back into the appliance.
  • Turn off the appliance when replacing the accessories.
  • Do not touch if there is leakage inside the battery.

DISPOSAL INFORMATION

  • VacLife products are made from premium recyclable materials. Recycle where possible.
  • The battery pack should be removed from the product before disposal.
  • Dispose or recycle of the battery in accordance with local ordinances or regulations.
  • Dispose of the exhausted filter unit in accordance with local ordinances or regulations.

PRODUCT DESCRIPTIONS

VACLIFE VL732 Cordless Vacuum Cleaner - Product
Descriptions

PRODUCT ASSEMBLY

VACLIFE VL732 Cordless Vacuum Cleaner - Product
Assembly

PRODUCT OPERATION

A. HOW TO CHARGE
Note

  • Please fully charge the appliance before the first use. Use the original adapter ONLY.
  • Turn off the appliance before charging.
  • Please charge the appliance when there is only one bar of the battery level indicator.
  • Please fully charge this appliance when it is not in use for a long time (generally 3 months).

Charge Directly

  1. Insert the tip of the adapter into the charging port on the appliance.

  2. Connect the adapter to the socket. The appliance will start charging with the flashing battery level indicator.

  3. It takes 4-5 hours to fully charge the appliance. Please unplug the adapter when there are solid three bars of battery level indicator.

Charge Separately

  1. Hold the handle with one hand, and then press the battery release button to detach the battery pack with the other.

  2. Insert the tip of the adapter into the charging port on the appliance and then connect the adapter to the socket. The appliance is charging with the flashing battery level indicator.

  3. It takes 4-5 hours to fully charge the appliance. Please unplug the adapter when there are solid three bars of battery level indicator.

B. HOW TO USE
Note

  • Please make sure the parts, especially the paper HEPA filter, are all installed before use.
  • Itis only suitable for tweed carpets, and short piles carpets with no longer than 0.8in carpet hair.
  • Do not use this appliance for cleaning keys, coins, screws, soybeans, or other trash larger than 7mm i n diameter.
  1. To unsnap the turbo brush head, step on it and pull back the vacuum cleaner to loosen the joint for use. To restore the appliance, step on the turbo brush head, keep the wand vertical and then push forward to snap the appliance.

  2. Hold the handle and then press the power button inside to turn on the vacuum cleaner. The LED headlines will light up.

  3. Press the +/- button atop the handle to switch the suction mode among low, middle, and high speeds. The appliance starts in middle-speed mode by default. Press the +/- button to shift to high-speed mode and press twice to shift to low-speed mode.

  4. Press the power button again to turn off the vacuum cleaner.

Accesories Using Advice

  1. Turbo Brush
    Suitable for vacuuming carpets with short piles, various hard floors like wood, tile, marble, etc. as well as large pieces of debris.

  2. Crevice Nozzle
    Suitable for vacuuming high places, corners, crevices, and hard-to-reach places.

  3. Dusting Brush
    Suitable for vacuuming keyboards, and upholstery, like sofas, and carpets.

  4. Storage Rack for Accessories
    It can be fastened on the wand and is used to store the crevice nozzle and dusting brush.

CLEANING & MAINTENANCE

A. Dust Cup/ Filters Cleaning
Note

  • When the trash inside the dust cup stack up higher than the MAX line, please empty the dust cup.
  • Regular cleaning of the filters helps to maintain the good performance of the appliance. Please wash the paper HEPA filter every 3 months.
  • Make sure the dust cup and the two filters are completely dry before placing them back for use.
  • The dust cup is not washable, please wipe it with a damp cloth.
  1. Press the wand release button to take the handle off.

  2. Unlock the cup locker and empty the dust cup. Rotate to take out the filter components.

  3. Pull out the paper HEPA filter from the stainless steel filter.

  4. Tap the paper HEPA filter to shake off the dust.

  5. Clean the stainless steel filter with tap water. Wash the HEPA filter every 3 months.

  6. Wipe the dust cup and the surface of the appliance body with a damp cloth.

  7. Let the filters and the dust cup dry completely. Put the paper HEPA filter into the stainless steel filter.

  8. Put the filter components back into the dust cup and rotate the components to secure them.

B. Turbo Brush Head Cleaning
Note

  • Turn off the appliance before removing the turbo brush head.
  • The turbo brush head is forbidden to wash because there are electronic components.
  • When the roller brush is entangled with hair, please clear it in time, or it will stop working.
  1. Press the turbo brush head release button to take the turbo brush head off.

  2. Find the latch on the right side of the turbo brush head and open it up. Take out the roller brush.

  3. Cut off hair entangled on the roller brush with the blade of the cleaning brush or the scissors.

  4. Wash the roller brush and wipe the interior of the turbo brush head with a damp cloth.

  5. Let the roller brush air dry for 24 hours.

  6. Put back the roller brush and then latch the turbo brush head.

TROUBLESHOOTING

PROBLEMS POSSIBLE CAUSES SOLUTIONS
Poor Suction The paper HEPA filter is clogged. Clean the paper HEPA filter.
The filters are wet. Let the filters air dry completely.
The battery is low. Fully charge the appliance.
The dust cup or the filters are not well-installed. Reinstall the dust cup or

the filters.
The dust cup is too full.| Empty the dust cup.
The appliance is damaged.| Please contact the customer service team.
Charging Fault| No power supply.| Make sure the power supply is available.
The adapter is not original.| Use the original adapter ONLY.
Battery fault.| Charge the appliance for 24 hours to activate the battery. If it still doesn’t work, please contact the customer service team.
The adapter is damaged.| If the indicator doesn’t light up when you connect the adapter to the socket, please contact the customer service team.
The appliance can’t work| The battery runs out.| Fully charge the appliance.
The blockage in the air outlet, turbo brush head, or wand will trigger the blocking protection.
The appliance may get hot and stop working.| Clear the blockage, wait for the appliance to cool down, and turn it on again.
The appliance is damaged.| Please contact the customer service team.
The roller brush doesn’t spin| The roller brush is entangled with hair.| Remove the hair with the cleaning brush. If the roller still doesn’t spin, please contact the customer service team.

If you have any other problems, please feel free to contact our customer service team.
support@vaclife.com

ABOUT WARRANTY

Q: Do you have a warranty for this product?****

– A: We strictly abide by the Amazon regulations which cover a full refund or a free replacement within 30 days since your purchase. Additionally, we offer a 1-year warranty, if there are any problems with this product, please always feel free to contact us at support@vaclife.com. We promise our team always stands behind our product and we will try our best to offer you a better user experience.

VACLIFE logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals