iRobot Braava jet m6 (6110) Wi-Fi Connected Robot Mop User Manual
- June 10, 2024
- iRobot
Table of Contents
Braava jet m6 (6110)
Wi-Fi Connected Robot Mop
User Manual
About Your Braava jet® m6 Robot Mop
Top View
Accessing the
Tank
Bottom
View
Home Base Charging
Station
Getting started
-
Get ready
To start, you’ll need your robot, charging station, the drip tray and power cable. -
Position the charging station and plug in
Choose an area near an outlet with good Wi-Fi coverage.
WARNING: To prevent the risk of your robot falling down stairs, ensure that the charging station is placed at least 4 feet (1.2 metres) away from stairs.
Plug the power cable into the charging station, and then into the wall. -
Attach the drip tray
Place the drip tray onto the front of the charging station. -
Wake up your robot
Slide your robot onto the charging station contacts to activate the battery.
The light ring will light up after a few minutes and a sound will let you know it’s awake. -
Connect and update
Connect your robot to the iRobot Home App to allow remote control, cleaning customisation and to keep your robot’s software up to date.
https://link.irobot.com/VXX6 -
Attach a cleaning pad
Slide a wet mopping or dry sweeping pad onto the underside of the robot.
Detach an existing cleaning pad by pressing the button on the front of the robot.
Cleaning Pad Types
WET MOPPING PADS
****Single-Use Wet Mopping Pad| Washable Wet Mopping Pad (Microfibre)
---|---
|
DRY SWEEPING PADS
| Single-Use Dry Sweeping Pad | Washable Dry Sweeping Pad (Microfibre) |
|---|---|
- Fill the tank
Remove the tank from the robot.| Add iRobot® Hard Floor Cleaning Solution (if
using).| Fill to the top with water.
---|---|---
| |
Cleaning Solution
When wet mopping, you may add iRobot® Hard Floor Cleaning Solution to the tank
before adding water. This product is a concentrate that is suitable for all
well-sealed hard floors.
Important: iRobot® Hard Floor Cleaning Solution is the only solution that
can be safely used in your robot mop. Please do not use other cleaning
solutions.
Using Your Braava jet® m6 Robot Mop
Cleaning
Use your robot frequently to maintain well-conditioned floors.
Tap to Start/Pause/Resume Hold for 3 seconds to end a job
and put the robot to sleep Hold for 10 seconds to reboot
-
Your robot will automatically explore and clean your home, moving in a methodical manner across the floor, with some overlap from one pass to the next to ensure that every spot on the floor is cleaned three times. If you are looking for a quicker clean or a deeper clean than this default setting, or if you want to adjust the amount of water sprayed, you can change your cleaning preferences from the iRobot Home App.
-
Your robot will return to the charging station at the end of a cleaning job, whenever it needs to recharge or when the tank needs to be refilled.
Note: If the ‘CLEAN’ text is pulsing while charging, your robot is in the middle of a cleaning job and will automatically resume where it left off once recharged. -
To send the robot back to its charging station, tap (home). A blue light ring pattern will indicate that the robot is seeking the charging station. This feature will only work if your robot started the job from the charging station.
-
When the robot senses that its tank needs to be filled, the light ring indicator will illuminate in a red sweeping motion towards the lid latch.
-
Clean smaller designated areas (3.3 ft2/1 m2) by placing your robot at the bottom centre of the space you’d like to focus on. Tap (spot clean) to start cleaning.
Tips for Optimising Performance
- Your robot works best when used with the iRobot Home app.
- For optimal mopping performance, we recommend that you vacuum first to pick up large dirt and debris before running Braava jet®.
- Your robot will only run with Braava jet® m Series pads, which are made specifically for Braava jet® m Series robots.
- Use a new pad for each cleaning job, and do not pre-wet the pads prior to use.
- Keep your charging station plugged in and the area around it clear of clutter.
- You can use a Dual Mode Virtual Wall® Barrier to help keep your robot in places that you want to be cleaned, and out of the ones you don’t. (Sold separately)
- Within the iRobot Home App, you can adjust cleaning preferences to modify cleaning power, speed and coverage.
Charging
-
Slide your robot onto the charging station contacts to activate the battery.
Note: Your robot comes with a partial charge, but we recommend that you charge the robot for 3 hours prior to starting the first cleaning job. -
The light ring indicator will show the current charging status. This will turn off after 1 minute to save power, but can be shown again if you press CLEAN. Thiscan also been seen in the iRobot Home App.
-
Your robot uses a small amount of power whenever it is on the charging station. You can put the robot in a further-reduced power state when not in use. For instructions and more details on this Reduced Power Standby Mode, refer to the iRobot Home App.
-
For long-term storage, turn off your robot by removing it from the charging station and holding down (home) for 10 seconds. Store your robot in a cool, dry place.
Lithium Ion Battery
For the best results, only use the iRobot Lithium Ion Battery that comes with
your Braava jet® m6.
WARNING: Lithium ion batteries and products that contain lithium ion
batteries are subject to stringent transportation regulations. If you need to
send this product (with the battery included) for service, travel or any other
reason, you MUST follow these delivery instructions.
- The battery MUST be turned off before shipping.
- Turn off the battery by removing the robot from the charging station and holding down (home) for 10 seconds. All indicators will turn off.
- Package the product in its original packaging.
- Ship via ground transportation only (no air shipping).
- If you need further assistance, contact our Customer Care team.
Troubleshooting
- Your robot will tell you something is wrong by playing an audio alert and turning the light ring indicator red. Press CLEAN for details. Further support and instructional videos are available in the iRobot Home App.
- After 90 minutes of inactivity off the charging station, your robot will automatically end its cleaning job.
Care and Maintenance
Cleaning the Sensors and Pad Reader
Clean the sensors on the bottom of your robot with a damp cloth.
Important: Do not spray cleaning solution or water onto the sensors or
sensor openings.
Cleaning the Wheels
Pull off any visible debris or hair that gathers around the wheels. Cleaning
the Body of the Robot
Wipe clean with a damp cloth.
Cleaning the Tank
If you notice an odour from the tank
-
Remove the tank from your robot mop.
-
Fill the tank with warm water.
Do not use boiling water. -
Close the cap and lightly shake the tank.
-
Rinse the tank and repeat as necessary.
Cleaning the Drip Tray
-
Remove the robot from the charging station.
-
Separate the drip tray by lifting it up from the charging station.
-
Clean the drip tray with a damp cloth or with warm water in the sink.
-
Dry thoroughly before reattaching the drip tray to the charging station.
-
Put your robot mop back onto the charging station.
Caring for Washable Cleaning Pads
Note: You can clean your washable pads in two ways: either by hand
washing or in a washing machine.
Hand Washing
Thoroughly wash the pad with warm water. Machine Washing
Wash using the warm cycle, then air dry.
Do not put in the dryer. Do not wash with delicates.
Regulatory Information
Regulatory Model: RMA-Y1
The iRobot Corporation hereby declares that this radio equipment device
is in compliance with the EU Radio Equipment Directive 2014/53/EU and the RoHS
Directive 2011/65/EU. The full text of the EU Declaration of Conformity is
available at the following internet address:
www.irobot.com/compliance.
The iRobot Corporation hereby declares that this radio equipment device is in
compliance with the Radio Equipment Regulations 2017 and The Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the UKCA Declaration of Conformity is
available at the following internet address:
www.irobot.com/compliance.
This device incorporates the Harpoon radio module model AXE-Y1. Harpoon is a
dual-band radio which operates in the WLAN 2.4 GHz and WLAN 5 GHz bands.
The 2.4 GHz band is limited to operate between 2400 MHz and 2483 MHz with a
maximum EIRP output power of 17.56 dBm (57 mW) at 2472 MHz.
The 5 GHz band is limited to operate between 5150 MHz and 5725 MHz with a
maximum EIRP output power of 18.23 dBm (66.52 mW) at 5700 MHz.
Instructions for Disposal of Waste Electrical & Electronic Equipment:
This symbol on the product indicates that the appliance must not be disposed
of with unsorted common municipal waste. As the end-user, it is your
responsibility to dispose of the end-oflife appliance in an environmentally
sensitive manner as follows:
- returning it to the distributor/dealer from whom you purchased the product; or
- depositing it in a designated collection point.
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details or your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. More information may be found at the following source: http://ec.europa.eu/environment/waste/weee/index_en.htm
iRobot Customer Care
USA & Canada
If you have questions or comments about your dirt disposal, please contact
iRobot before contacting a retailer.
You can start by visiting global.irobot.com for support tips, frequently asked
questions, and information about accessories. This information can also be
found in the iRobot Home App. If you need further assistance, call the US
Customer Care team at 877-855-8593.
iRobot USA Customer Care Hours
Monday to Friday, 9AM — 9PM Eastern Time
Saturday and Sunday 9AM — 6PM Eastern Time
Outside USA & Canada
Visit global.irobot.com to:
Learn more about iRobot in your country
Get hints and tips to improve your product performance
Get answers to questions
Contact your local support center
©2022 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 USA. All rights
reserved.
iRobot, Braava jet, and Virtual Wall are registered trademarks of iRobot
Corporation, in the United States and other countries. App Store is a
trademark of Apple, Inc., registered in the U.S. and other countries. Google
Play is a trademark of Google, Inc. Wi-Fi and the Wi-Fi logo are registered
trademarks of Wi-Fi Alliance.
For more information, visit global.irobot.com
WC#: 4817710 vA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>