Shark SV60 Cordless Hand Vacuum User Manual
- June 10, 2024
- Shark
Table of Contents
- Shark SV60 Cordless Hand Vacuum User Manual
- IMPORTANT SAFETY INSTRUCTIONS
- FEATURES
- CHARGING YOUR HAND VACUUM
- MAXIMIZING THE LIFE OF YOUR NI-CD BATTERY
- ASSEMBLY OF THE HAND VACUUM
- USING THE CORDLESS VACUUM
- CHANGING & CLEANING THE DUST CUP FILTER
- BATTERY PACK REPLACEMENT & DISPOSAL
- TROUBLE SHOOTING
- PARTS
- ONE YEAR LIMITED WARRANTY
- DOWNLOAD
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shark SV60 Cordless Hand Vacuum User Manual
MODEL: SV60 14
QUICK START GUIDE
IMPORTANT : To register your Shark® Cordless Hand Vacuum, visit our website www.sharkclean.com.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR CORDLESS HAND VACUUM
When using your hand vacuum, basic safety precautions should always be followed, including the following:
1. DO NOT use, charge or store the hand vacuum outdoors or on wet surfaces.
Store the cordless vacuum indoors. Put vacuum away after use to prevent
accidents.
2. Use only as described in this manual.
3. DO NOT allow to be used as a toy. Close attention is necessary when used
by or near children. DO NOT leave vacuum unattended while in use.
4. DO NOT handle plug, charger or appliance with wet hands.
5. Fully assemble hand vacuum before operating. DO NOT use hand vacuum
cleaner without dust cup filter in place. Use only on dry, indoor surfaces.
6. DO NOT use charger with an extension cord. Plug charger directly into an
electrical outlet. Use charger only in a standard (120V., 60Hz) electrical
outlet.
7. DO NOT attempt to use the charger with any other product nor attempt to
charge this product with another charger. Use only the charger model
KA12D180020033U supplied with this appliance.
8. DO NOT use charger with damaged cord or plug. If charger or hand vacuum
has been dropped, damaged, left outdoors, or dropped in water, return it to
EURO-PRO Operating LLC for examination, repair or adjustment.
9. DO NOT abuse the charger cord, pull cord around sharp edges or corners or
close door on cord. Never carry the charger by the cord or yank to disconnect
from an outlet; instead grasp the plug and pull to disconnect. Keep charger
cord away from heated surfaces.
10. Use only manufacturer’s recommended attachments. Always turn off this
appliance before connecting or disconnecting the motorized nozzle. DO NOT
attempt to change accessories while unit is running.
11. Use extra care when cleaning on stairs.
12. Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts.
13. DO NOT put any objects into openings. DO NOT use with any opening
blocked; keep free of dust, lint, hair and anything that may reduce air flow.
14. DO NOT use to pick up flammable or combustible liquids such as gasoline
or use in areas where they may be present. DO NOT pick up anything that is
burning or smoking, such as cigarettes, matches, or hot ashes.
15. This product includes rechargeable nickel cadmium batteries. Batteries
must be recycled or disposed of properly and safely. The battery must be
removed from the appliance before it is discarded. The appliance must be
disconnected from the supply when removing the battery. Do not incinerate
batteries or expose to high temperatures, as they may explode.
16. Leaks from battery cells can occur under extreme conditions. If the
liquid, which is 20-35% solution of potassium hydroxide, gets on the skin –
wash immediately with soap and water or neutralize with a mild acid such as
lemon juice or vinegar. If the liquid gets into the eyes, flush them
immediately with clean water for a minimum of 10 minutes and seek medical
attention.
17. DO NOT use for any purpose other than described in this user’s guide.
Look on your hand vacuum and follow all label and marking instructions.
18. This vacuum is intended for household use only.
SAVE THESE INSTRUCTIONS
FEATURES
1. Air-Intake Nozzle
2. Dust Cup Container
3. Dust Cup Filter
4. Dust Cup Release Button
5. Charging Indicator Light
6. On/Off Switch
7. Motor Housing
8. Charging Adapter
9. Motorized Brush
10. Crevice Tool
TECHNICAL SPECIFICATIONS: 12 Volt dc
CHARGING YOUR HAND VACUUM
1. Before first using the hand vacuum, make sure that the On/Off switch is in
the “Off” position and charge it for 20 – 24 hours.
2. Connect the charging jack to the charging hole that is on the back of the
vacuum.
3. Plug the charger into the wall outlet. The charging indicator light will
illuminate to show that the vacuum is being charged.
4. After first use, discharge the unit fully and then recharge for 16 hours.
5. Always remove the unit from the charger after the 16 hour charging period
has completed.
MAXIMIZING THE LIFE OF YOUR NI-CD BATTERY
6. Charge for 20 – 24 hours before initial use. Failure to do so will reduce
the product’s battery life significantly.
7. Only recharge when the batteries are fully discharged (or as close to
fully discharged as possible). Recharge for 16 hours and then unplug the unit.
8. Do not store the unit with the charging adapter attached and plugged in.
9. Do not store in areas of high temperature or humidity.
10. Use only the charger supplied with the product. If other chargers are
used, the batteries can fail causing damage to the battery, product or
personal property.
11. After 3 months of non-use, the product should be fully discharged and
then recharged to maximize battery power.
12. If the product has never been used or has been stored for an extended
period of time without use – it will take several complete charge and
discharge cycles to realize the full operational time of your product.
13. Ni-Cd batteries have a long useful life but at some time they will need
to be replaced. To purchase replacement batteries, visit
www.sharkclean.com.
ASSEMBLY OF THE HAND VACUUM
IMPORTANT : The dust cup filter must always be used when operating the hand vacuum.
14. Push the dust cup release button and remove the dust cup.
15. Verify that the dust cup filter is inside, then reattach the dust cup to
the hand vacuum.
16. The motorized brush can be used to vacuum short pile carpets or rugs. To
attach the motorized brush, make sure the On/Off switch is in the Off
position. Then firmly insert the motorized brush into the air-intake nozzle,
ensuring that the contact pins are engaged in the connector slots of the unit.
WARNING : Do not touch the motorized brush while it is in motion.
17. The crevice tool can be used to clean narrow, hard to reach places. To attach the crevice tool, push the attachment into the air-intake nozzle.
USING THE CORDLESS VACUUM
CAUTION : The air-intake nozzle and attachments must be free of obstructions at all times, otherwise the motor will overheat and could become damaged.
18. To start the vacuum, push the “On/Off” switch to the “On” position.
19. To turn the vacuum “Off”, push the “On/Off” switch to the “Off” position.
CHANGING & CLEANING THE DUST CUP FILTER
NOTE : It is recommended that the dust cup filter be replaced every three (3) months to ensure peak performance of the vacuum.
20. Press the dust cup release button and pull out the dust cup.
21. Carefully remove the dust cup filter and empty the dust from the dust
cup.
22. Rinse the dust cup filter in cold water and let it dry completely before
replacing back into the dust cup. Do not wash it in a washing machine or use a
hair dryer to dry it. Air dry only!
BATTERY PACK REPLACEMENT & DISPOSAL
The cordless hand vacuum is powered by Ni-Cd batteries, which must be recycled or disposed of properly in accordance with state, federal and local laws. If uncertain as to how to remove the battery pack, we suggest that you take your hand vacuum to a reputable small appliance service technician to have this service performed. Do not attempt to replace the batteries used in this product with any other type of battery. Follow these steps when replacement of the battery pack is required:
23. Using a #1 Phillips head screwdriver, remove the single screw securing the battery compartment cover located underneath the unit.
24. To remove the cover, lift up the battery compartment cover. Never open
the battery compartment except to replace the battery pack. Set the cover and
the screw aside.
25. Slide the battery strap over and lift it out.
26. Carefully lift out the battery pack and disconnect the terminals.
27. Connect the terminals to the new battery pack taking care to connect the
black lead (-) to the negative connector first and the red lead (+) to the
positive connector second and insert into the battery compartment. Take care
to tuck the wiring completely in so that the wiring does not interfere with
the battery compartment cover when it is replaced.
28. Replace the battery strap, the battery compartment cover and the screw making sure not to over-tighten the screw.
WARNING : Never use ordinary batteries for replacement as these may leak and damage your vacuum cleaner. Use only the battery pack XBT60 provided by EURO-PRO Operating LLC for replacement. Call customer service at 1 800-798-7398 or visit our web site at www.sharkclean.com to order replacement battery packs.
CAUTION:
- Use only with battery pack supplied.
- Do not attempt to remove the battery pack from the unit to charge.
- Never throw the battery pack or the appliance into a fire or incinerate it.
- Do not remove or damage the battery casing.
- Do not place the batteries on metal surfaces.
- Do not touch metal parts of the batteries together as the batteries will overheat.
TROUBLE SHOOTING
The hand vacuum will not operate| Batteries need to be recharged.
Batteries are dead and need to be replaced.
There is no power in the electrical outlet being used while charging. Try to
charge using a different electrical outlet.
---|---
Motorized brus will not work| The metal contact pins on the motorized brush
are not in contact with the connector slots on the vacuum. Remove the
motorized brush and re-insert firmly into the air-intake nozzle.
The motorized brush is blocked. Carefully remove all the lint, hair, etc.
from the motorized brush.
Hand vacuum will not pick up or suction is weak| Dust cup is full. Empty the
dust cup.
Dust cup filter needs cleaning or replacement. Clean or replace the dust cup
filter.
Vacuum needs to be recharged.
Dust is escaping from the hand vacuum| Empty the dust cup container.
The dust cup filter is not installed correctly. Remove it and re-insert it.
The dust cup filter has a hole or a puncture in it. Replace it with a new
one.
PARTS
To order additional parts for your Shark® CORDLESS HAND VACUUM model SV60 14, go to www.sharkclean.com or call 1-800-798-7398 Monday to Friday, 8:30 A.M. – 5:00 P.M. Eastern Standard Time.
PART | PART NO |
---|---|
Dust Cup Filter | XSB726N |
Battery Pack | XBT60 |
Charging Stand (optional) | 1048FI |
ONE YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.
Non-durable parts, including, without limitation, filters, brushes and electrical parts which normally require replacement are specifically excluded from this warranty.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For customer service support, call 1-800-798-7398 or visit our web site at www.sharkclean.com.
If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-
PRO Operating LLC’s sole discretion, we will repair or replace it free of
charge. Proof of purchase date and check made payable to EURO-PRO Operating
LLC in the amount of $11.95 to cover the cost of return shipping and handling
must be included.
This warranty is extended to the original purchaser of the unit and excludes
all other legal, implied and/or conventional warranties. The responsibility of
EURO-PRO Operating LLC if any, is limited to the specific obligations
expressly assumed by it under the terms of this Limited Warranty. In no event
is EURO-PRO Operating LLC liable for incidental or consequential damages to
anyone of any nature whatsoever. Some states do not permit the exclusion or
limitation of incidental or consequential damages, so the above may not apply
to you.
This Limited Warranty gives you specific legal rights, and you may also have
other rights which vary from state to state or province to province.
- IMPORTANT : Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach a tag to item before packing including your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
U.S.: EURO-PRO Operating LLC
Boston, MA 02459
Canada: EURO-PRO Operating LLC
4400 Bois Franc
Ville St. Laurent, Québec H4S 1A7
1-800-798-7398
www.sharkclean.com
COPYRIGHT© EURO-PRO OPERATING LLC 2010
PRINTED IN CHINA REV. 100407
Illustrations may differ with actual produc
DOWNLOAD
Shark SV60 Cordless Hand Vacuum:
Quick Start Guide – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>