SEAGATE BarraCuda 510 SSD NVME Internal Solid State Drive Installation Guide

: June 10, 2024
: Seagate

Table of Contents

SEAGATE BarraCuda 510 SSD NVME Internal Solid State Drive
Product Information
Product Usage Instructions
Sea Tools
Introduction
- Warranty
Preparing for Installation
Installing the SSD
Disc Wizard
Seagate Technology Support Services
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEAGATE BarraCuda 510 SSD NVME Internal Solid State Drive

SEAGATE BarraCuda 510 SSD NVME Internal Solid State Drive
product

Product Information

The Seagate BarraCuda 510 SSD is a high-performance solid-state drive designed for use in any computer system with an 80 mm long M.2 M-key slot. It comes in the M.2 2280 form factor and has a limited warranty of 5 years. It is equipped with the latest NV Me interface for faster data transfer and is compatible with SeaTools, a free software that tests and analyses drives for health monitoring, overall monitoring and drive maintenance.

Product Usage Instructions

Power down and power drain your computer according to the instructions provided in the computer product documentation.
Unpack the SSD and inspect it for any damages.
Backup the data from the existing storage device.
As a precaution against electrostatic discharge (ESD) that can damage the SSD, make sure that you install the SSD at an ESD-safe workstation and ground yourself to protect the device from any static electricity present in your body.
Open the case or cabinet and remove the existing storage devices if any.
Access the BIOS setup while the computer is booting by pressing the keys displayed on the screen.
Locate the M.2 slot on your motherboard. The desktop and laptop shown in the manual are for demonstration purposes only. Your computer might be different than the ones shown here, but the procedure is the same.
Insert the Seagate BarraCuda 510 SSD with the pinside going into the M.2 slot and the label side facing the top at a 30 degree angle.
Press the SSD down and mount it above the screw slot of the motherboard and fasten the screws.
Close the case or cabinet and reassemble your computer.
Power on your computer and start installing the Operating System on the BarraCuda 510 SSD if you want to use it as the primary drive.

Sea Tools

Sea Tools is a free software from Seagate that tests and analyses drives. It is completely data safe and easily installs on your system. You can use Sea Tools in your BarraCuda 510 SSD for:

Health Monitoring
Drive Maintenance
Overall Monitoring

More information and Sea Tools documentation are available at:https://www.seagate.com/in/en/support/downloads/seatools
© 2019 Seagate Technology LLC. All rights reserved.
Publication number: 100850349 , February 2019
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SeaTools is either a trademark or registered trademark of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1 (877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment and other factors. The export or re- export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.

Introduction

This document describes how to install the Seagate® BarraCuda® 510 SSD on your computer. The Seagate BarraCuda 510 SSD is a versatile NVMe SSD that is optimized for maximum storage capacity with a wide range of application utilities. It is up to 6x faster than SATA SSDs and has TCG security to keep data safe and secure. See the SSD product documentation for warranty and more details.
The BarraCuda 510 SSD comes in the M.2 2280 form factor and can be used in any computer system with an 80 mm long M.2 M-key slot.
Note
The desktop and laptop shown in this document are for demonstration purposes only. Your computer might be different than the ones shown here but the procedure is the same.

Warranty

5 years limited warranty. See:
https://www.seagate.com/support/warranty-and-replacements/limited-consumer- warranty/
Ensure that you review any warranty policy and instructions provided by your motherboard and computer manufacturer and you follow appropriate procedures to install your storage device. By proceeding with any installation, you agree to be solely responsible for any failure to follow any manufacturer’s instructions.

Preparing for Installation

Unpack the SSD.
Inspect the SSD for any damages.
Power down and power drain your computer according to the instructions provided in the computer product documentation
Backup the data from the existing storage device.

CAUTION
Electrostatic discharge (ESD) can damage the SSD. Make sure that you install the SSD at an ESD-safe workstation. As a precaution, ground yourself to protect the device from any static electricity present in your body.
Required Tools
A suitable screwdriver and screws to fasten the M.2 SSD.

Installing the SSD

Open the case or cabinet.
Remove the existing storage devices if any.
Power on your computer.
Access the BIOS setup while the computer is booting. Usually, the computer screen displays the keys to be pressed to access the BIOS setup during the boot process. See the computer or motherboard documentation for information on how to access the BIOS.
Ensure that a PCIe device is set in the BIOS boot sequence or boot priority list. See the computer or motherboard documentation for details on how to these information and how to boot from an M.2 SSD.
Power down the computer.
Locate the M.2 PCIe slot in your motherboard.
Note:The images shown here are just examples. Your computer might look different than what is shown here.
M.2 Slot in a Desktop
M.2 Slot in a Laptop
Insert the BarraCuda 510 SSD with the pin side going into the M.2 slot and the label side facing the top at a 30 degree angle.
Seagate M.2 SSD in the M.2 Slot
Press the SSD down and mount it above the screw slot of the motherboard and fasten the screws.
Close the case or cabinet and reassemble your computer.
Power on your computer.
Start installing the Operating System on the BarraCuda 510 SSD if you want to use it as the primary drive.

Disc Wizard

Seagate Disc Wizard is an integrated software suite that ensures the security of all of the information on your PC. It can clone, back up the operating system, applications, settings and all of your data, while also securely destroying any confidential data you no longer need. With this software, you can back up the entire disk drive or selected partitions. Seagate Disc Wizard provides you with all the essential tools to recover your computer system should a disaster occur, such as losing data, accidentally deleting critical files or folders, or suffering a complete hard disk crash. You can store backups on almost any PC storage device.
More information and Disc Wizard documentation are available at:https://www.seagate.com/in/en/support/downloads/discwizard/

Seagate Technology Support Services

For Internal SSD Support, visit: https://www.seagate.com/support/products/
For information regarding online support and services, visit: http://www.seagate.com/contacts/
For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/
For information regarding data recovery services, visit: http://www.seagate.com/services-software/seagate-recovery-services/recover/

Seagate Technology LLC
AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000
ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 90 Woodlands Avenue 7, Singapore 737911, 65-6412-3666
EUROPE, MIDDLE EAST, AND AFRICA Seagate Technology (Netherlands) B.V. Koolhovenlaan 1, 1119 NB Schiphol-Rijk, Netherlands, 31-20-316-7300
Publication Number: 100850349
February 2019