speco FMT1 In Ceiling Flush Mounting User Guide

Table of Contents

speco-FMT1-In-Ceiling-Flush-Mounting-PRODUCT

Thank you for purchasing our product. This manual is applicable to the in- ceiling bracket. All pictures in this manual are for reference only.

The following are examples of mounting types:

speco-FMT1-In-Ceiling-Flush-Mounting-FIG-1

Before installation, please make sure of the following:

The height of the space above the ceiling must be more than 250mm.
The thickness of the ceiling must range from 5mm to 40mm.
The ceiling must be strong enough to withstand more than four times the weight of the dome camera and the accessories.

The following are the installation steps

In-Ceiling Mounting for Fixed Dome Camera

Attach the drill template to the ceiling where you want to install the dome camera. Then cut a hole according to the drill template. Note that +2mm of the circle diameter is allowed.
Remove the lower dome of the camera. Then place the in-ceiling bracket on the dome camera and tighten the screws provided to fix the bracket and the dome camera. (For type B, you shall rotate the trim ring anticlockwise to remove it. Then you can remove the lower dome by loosening the screws.)
Route the cables through the ceiling and connect the cables. Then push the dome camera with the bracket into the mounting hole in the ceiling.
Tighten the lock screws with the screwdriver and the locks will automatically rotate outwards to secure the dome camera to the ceiling. Then adjust the view angle of the camera.
Install the lower dome back to the camera. (For type B, after installing back the lower dome, please put the trim ring onto the lower dome and rotate it clockwise until it is locked.)
Install the magnetic ring of the bracket.

In-Ceiling Mounting for Varifocal Dome Camera

Attach the drill template to the ceiling where you want to install the dome camera. Then cut a hole according to the drill template. Note that +2mm of the circle diameter is allowed.
Rotate the trim ring anticlockwise to remove it. Then remove the lower dome of the camera by loosening the screws. After that, place the in-ceiling bracket on the dome camera and make sure the screw holes of the dome camera are aligned with the screw holes of the bracket marked with A. Then fix the camera to the bracket with screws.
Route the cables through the ceiling and connect them. Then push the dome camera with the bracket into the mounting hole in the ceiling.
Tighten the lock screws with the screwdriver and the locks will automatically rotate outwards to secure the dome camera to the ceiling. Then adjust the view angle of the camera.
Install the lower dome back to the camera. Then put the trim ring onto the lower dome and rotate it clockwise until it is locked.
Install the magnetic ring of the bracket.

In-Ceiling Mounting for Varifocal Dome Camera

Attach the drill template to the ceiling where you want to install the dome camera. Then cut a hole according to the drill template. Note that +2mm of the circle diameter is allowed.
Attach the mounting base to the ceiling with the fixed screw provided.
Remove the lower dome of the camera. Then place the in-ceiling bracket on the dome camera and align the screw holes marked with B on the bracket with the screw holes on the mounting base. Then fix the camera to the bracket with screws.
Route the cables through the ceiling and connect them. Then push the dome camera with the bracket into the mounting hole in the ceiling.
Tighten the lock screws with the screwdriver and the locks will automatically rotate outwards to secure the dome camera to the ceiling. Then adjust the view angle of the camera.
Install the lower dome back to the camera.
Install the magnetic ring of the bracket.