POTTER P32-1T Die-Cast Metal Manual Pull Stations Owner’s Manual

: June 10, 2024
: POTTER

Table of Contents

POTTER P32-1T Die-Cast Metal Manual Pull Stations
Description
Specifications
Ordering Information
Operation
Instruction
Description
Operation
Engineering Specifications
Ordering Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

POTTER P32-1T Die-Cast Metal Manual Pull Stations

Description

The Potter Pull Station Series provides a range of die-cast pull stations suitable for a variety of applications primarily concentrating on fire alarm systems. The pull stations come in single or dual action models and feature a 10-amp snap action switch and a dedicated terminal block for easy wire connections. The metal is completely coated to prevent corrosion and provide a uniform finish.

Specifications

Switch Rating: 1 Amp @ 30 VDC, 10 Amps @ 125 VAC
Dimensions: 4-3/4 H x 3-1/4 W x 7/8 D
Color: Red with raised white letters, white pull bar with raised red letters

For special application manual stations see bulletin #8910014.
For explosion-proof manual stations see bulletin #8880014.

Ordering Information

Type	Model Number	Stock Number	Contact Type
Single Action	P32-1T	1000447	SPST
Weather Proof Dual Action	RMS-2T	1000477	DPST
Dual Action	RMS-6T	1000478	DPDT
Dual Action Accessories	RMS-1T-KL	1000451	SPST, key operated, no pull
RMS-1T-KO	1000450	SPST
RMS-1T-WP	1000401	SPST
P32-1T-LP	1000476	Converts single action to dual action
RMS-1T-WP-LP	1000403	Surface mount back box
	RMS-LP	Deep surface mount back box
	1000444	Replacement glass rods (10 per pkg)
	1000445	For special application manual stations see bulletin #8910014.

For explosion proof manual stations see bulletin #8880014.

Operation

The Potter single action pull stations are operated by pulling the white operating handle straight down until it locks into place. The dual action stations require lifting the front cover and then pulling the white operating handle straight down. The stations can be reset by opening the front cover and placing the handle in the normal position.

Note that the standard models have a hex key reset, but a key reset is also available. The models come with shallow and deep surface mount back boxes and as a weatherproof version.

For more information on manual stations for special applications or explosion- proof manual stations, please refer to bulletin #8910014 and bulletin #8880014 respectively.

Instruction

UL and cUL Listed, FM Approved, CSFM Listed, MEA Approved, ADA Compliant
Single or Dual Action
Terminal connectors
10 Amp Snap Action Switch
Gold plated SPST contacts
Optional auxiliary contacts
Mounts on standard single gangbox
Surface backboxes available
High-gloss red enamel finish
Glass break rod
Made in the U.S.A.

Description

The Potter Pull Station Series offers a complete line of die-cast pull stations for a variety of applications focusing mainly on fire alarm systems. The pull stations are available in single or dual action models. All of the pull stations have a 10-amp snap action switch and a dedicated terminal block for the ease of wire connections. All of the metal is completely coated to inhibit corrosion and provide for a uniform and quality finish.
The standard models have a hex key reset, however a key reset is also available. The models are available with shallow and deep surface mount back boxes and as a weatherproof version.

Operation

The Potter single action series of pull stations operate by pulling the white operating handle straight down and the handle will lock into place. The dual action stations require the lifting of the front cover and then pulling the white operating handle straight down. The stations are reset by opening the front and placing the handle in the normal position.

Engineering Specifications

The contractor shall furnish and install the Potter series of pull stations as indicated. The pull station shall be die cast construction with a “T” type pull handle that is ADA compliant. Single action pull stations shall be a P32-1T. Dual action pull stations shall be the Potter P32-1T-LP. Any manual pull station installed in an outdoor or wet location shall be a RMS-1T-WP weather proof unit. The contact shall be a single pole, single throw switch rated at 1 amp 30V DC/125V AC. The device shall have a terminal block for ease of wiring. Once activated, the pull station shall be reset by opening the front cover. Opening of the cover in a normal state shall initiate an alarm.

Ordering Information

Type	Model Number	Stock Number	Contact Type

__

Single Action

| P32-1T| 1000447| SPST
RMS-2T| 1000477| DPST
RMS-6T| 1000478| DPDT
RMS-1T-KL| 1000451| SPST
RMS-1T-KO| 1000450| SPST, key operated, no pull
Weather Proof| RMS-1T-WP| 1000401| __

SPST