JLR Gear 2 In 1 Magnetic Wireless Charger Instruction Manual

JLR Gear 2 In 1 Magnetic Wireless Charger Instruction Manual

Specifications

Connecting Power

1. Connect USB cable to USB-C port on side of charger.
2. Connect to USB power source 2 amps of greater. For best results and faster charging speeds, connect to a 3 amp USB power source.

MagSafe® compatible wireless charge pad works with all Qi™ enabled smartphones including Android™ and will align iPhone® 12 or later magnetically. MagSafe® compatible cases recommended.

MagSafe® compatible wireless charge pad works with all Qi™ enabled smartphones including Android™ and will align iPhone® 12 or later magnetically. MagSafe® compatible cases recommended.

Charging Your Devices

1. Fold open and place smartphone in the center of the pad to charge wirelessly.
2. Place Apple Watch® flat on the watch charger or flip up the pad as shown.
3. Fold closed and place AirPods® on the charging dock on the reverse side of the magnetic phone pad to charge wirelessly. AirPods® can also be charged on the magnetic side of the pad.
4. LED light will indicate device is charging. Your device will display the charging progress on screen.

Above illustrations show phone, watch and AirPods@ charging positions. Care Tip: Unplug charger and wipe with a soft cloth. Never use any abrasive cleaning agents or get wet. Periodically wipe off accumulated dust.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected.

WARNING! IMPORTANT CARE AND SAFEGUARDS

Failure to follow the safety instructions can lead to fire, electrical shock, personal injury or property damage and damage to this product.

• Do not use this wireless charger for anything other than it’s intended use
• This product is not intended charge batteries or other devices
• If you have an electrical device, such as a pacemaker, consult a physician before using this product
• Do not place magnetic cards or similar items near this product
• Keep all foreign objects, small metal pieces and debris away from charging surfaces at all times
• Make sure charging surfaces are completely clear prior to use and at all times
• Always use the specified power source and voltage
• Do not use a voltage converter/ travel adapter
• Always place the charging pads on a sturdy and level surface
• This product contains small parts and is not suitable for children
• Do not expose this product to rain, water or excessive humidity
• If the charger becomes wet, immediately unplug it from the power source
• Keep charger away from heat sources and direct sunlight
• Always use this product in operating temperatures of 32 ‘F (O ‘ C) 95 ‘F (35°C)
• Do not handle charger, USB power cord or power source with wet hands
• Do not let dust or other things accumulate on charger and power cord
• Do not use the charger if it has been dropped or damaged in any way
• Never take this device apart and always get repaired by a qualified technician
• Always unplug the charger when not in use for a long period of time

CAlJTION! Device must have Qi enabled charging. Check with manufacturer for compatibility.
Never use the charger to charge smartphones with metal cases or metal plates between the case and the phone. Some additional non-metal protective cases may also interfere with proper charging.
The charger, phone and accessories will feel warm during or after charging.

The ‘Qi’ symbol is a trademark of the Wireless Power Consortium. iPhone, Apple Watch, AirPods and MagSafe are registered trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Any questions, please call customer service at 1-800-254-0lll
8:30am – Spm, PST. Monday- Friday, or email us at customerservice@jlrgear.com

2434 Research Dr., Livermore, CA 94550
2023 JLR Gear – Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>