SOUNDPRO 101736-001B WATERPROOF BLACK MAGNETIC SPEAKER User Manual
- June 10, 2024
- SoundPRO
Table of Contents
- SOUNDPRO 101736-001B WATERPROOF BLACK MAGNETIC SPEAKER
- Product Information
- Product Usage
- Product Safety Information
- Product Packing List
- SPECIFICATION
- BUTTON FUNCTIONS
- LED INDICATOR GUIDE
- PAIRING THE DEVICE/BASIC OPERATIONS
- SAFETY INFORMATION
- PACKING LIST
- FCC
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SOUNDPRO 101736-001B WATERPROOF BLACK MAGNETIC SPEAKER
Product Information
The SoundPro Waterproof Magnetic Speaker-Black (Item: 101736-001B) is a Bluetooth speaker with an IPX6 rating, making it resistant to water splashes and dust. It has a 33 ft. operating distance and features a 1200 mAh battery that can provide up to 3 hours of playtime. The speaker has a 40 mm driver and an output power of 2x 5 watts. It can be charged using a USB cable, has a 3.5mm aux input, and supports Bluetooth Version V5.1. The device is 76.2 mm in size and has an LED indicator for charging, pairing, and playing.
Product Usage
- To turn on the device, press and hold the Power button for 2-3 seconds until you hear “di di di”.
- On your device’s wireless connection menu, find and select GEMLINE SPKR to pair it.
- The blue LED will flash slowly when the pairing is complete, and you will hear “di di di”.
- The blue LED will stay on while the speaker is on.
- To play music, connect your device to the speaker via Bluetooth or the 3.5mm aux input.
- To adjust the volume, press the Volume Up or Volume Down button.
- To skip to the next or previous song, press the Next Song or Previous Song button.
- To pause or resume playback, press the Play/Pause button.
- To turn off the device, press and hold the Power button for 2-3 seconds until you hear “di di di”.
- To charge the device, plug the charging cable into the charging port of the speaker and connect the USB end to a compatible power source. The red LED will turn on to indicate charging and turn off when fully charged.
- Ensure all cable connections are removed and the port cap is closed and tightly sealed before bringing the speaker near water.
Do not expose the speaker to water while it is charging.
Product Safety Information
- Do not attempt to disassemble the device.
- Do not expose the device to extreme heat or flames.
- The speaker may become warm while charging, which is normal.
- If the battery is low, the device will beep every 20 seconds.
- If the speaker causes interference with radio or television reception, try repositioning the receiving antenna or relocating the speaker.
- Consult the dealer or an experienced radio/TV technician for further assistance if necessary.
Product Packing List
- USB Charging cable
- User Manual
- Kraft box
SPECIFICATION
- Item: 101736-001B
- IPX6
- 33 ft. operating distance
- 1200 mAh battery
- 40 mm driver
- Approx. 3 hour play time
- Output power- 2x 5 watt
- lnput-5V/500mAh, 3.5mm aux, Micro USB
- Bluetooth Version: V5.1
- Frequency Range : 2402MHz ~ 2480MHz
- Modulation Type : GFSK, π/4-DQPSK for Bluetooth V5.1(DSS)
BUTTON FUNCTIONS
Power ON/OFF (Press and hold 2-3 seconds)
Previous Song
Next Song
Volume Down
Volume Up
Play/Pause
LED INDICATOR GUIDE
- Charging: Red LED on
- Fully Charged: Red LED off
- Pairing Mode: Blue LED will flash quickly
- Connected: Blue LED on
- Playing: Blue LED will flash slowly
PAIRING THE DEVICE/BASIC OPERATIONS
Press the ON/OFF button for 2-3 seconds or until you hear “di di di”.
- On your device’s wireless connection menu, find and select “GEMLINE SPKR”.
The blue LED will flash slowly when the pairing is complete, and you will hear “di di di”.
- The blue LED will stay on while the speaker is on.
- When the battery is low. the speaker will beep every 20 seconds.
To turn the speaker off, press and hold the ON/OFF button for 2-3 seconds.
You will hear “di di di”.
CHARGING THE SPEAKER
-
Plug the charging cable into the charging port of the speaker.
Plug the USB into a compatible power source -
The red LED will turn on and indicate if the speaker is charging.
-
Once the speaker is fully charged, the red LED will turn off. When the device indicates the battery is low, approx.4-5 hours of charging time is needed to fully recharge the battery.
SAFETY INFORMATION
- Do not attempt to disassemble the device.
- Do not expose the device to extreme heat or flames.
- The speaker may become warm while charging. This is normal.
- Ensure all cable connections are removed and port cap is closed and tightly sealed before getting the speaker near water.
- Do not expose the speaker to water while it is charging. This may result in permanent damage to the speaker or power source.
PACKING LIST
- USB Charging cable
- User Manual
- Kraft box
FCC
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)this device may not cause interference, and(2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>