L O C PRO ADVANCED LPHGM52 LPH Harness Instruction Manual
- June 10, 2024
- L O C PRO ADVANCED
Table of Contents
L O C PRO ADVANCED LPHGM52 LPH Harness
LPH Harness Instruction Guide
The LPH Harness is a wiring harness designed for use with aftermarket amplifiers on OEM non-amplified systems. It is provided with an inline fuse that should be removed prior to installation and reinserted once installation is completed. The harness uses DC Offset to turn on and trigger the REM OUT on the LPA if your vehicle doesn’t provide an ACC source. The harness should be fully opened before inserting the wire.
Wiring Connection Chart (All Models)
- If your vehicle does not provide an ACC source, your harness will not have a RED wire to connect.
- Connect the RED BUTT Connector to the aftermarket system turn on for your amplifiers.
- This harness is designed to work on OEM NON-AMPLIFIED systems.
Example Installation – 4-Channel Amplifier
(HARNESS CUT REQUIRED)
To install a 4-channel amplifier with the LPH Harness:
- Cut the harness where indicated and insulate.
- Connect the loose wires to the LPA and the RCA from the LPA to the aftermarket amplifier.
- Connect the REM OUT from LPA to the aftermarket amplifier.
- Connect the LPH Harness to the radio connection.
- Connect the RED BUTT Connector to the aftermarket system turn on for your amplifiers.
Example Installation – Mono Amplifier
(HARNESS CUT NOT REQUIRED)
To install a mono amplifier with the LPH Harness:
- Connect the loose wires to the LPA and the RCA from the LPA to the aftermarket amplifier.
- Connect the REM OUT from LPA to the aftermarket amplifier.
- Connect the LPH Harness to the radio connection.
- Do not cut or insulate.
- Connect the LPH Harness directly to the aftermarket amplifier.
- Connect the RED BUTT Connector to the aftermarket system turn on for your amplifiers.
ANC vs Amplifier
The ANC (Active Noise Cancellation) Module and Amplifier are located differently in different vehicles, as follows:
- ANC / Amp Location 2019+ RAM 1500: Under Driver Seat
- ANC / Amp Location 2019+ RAM 2500/3500: Under Driver Dash
- ANC / Amp Location Jeep Cherokee: Above glove box
- ANC / Amp Location Chrysler Pacifica: Right of glove box / above passenger kick
- ANC Location 2015-2016 Grand Cherokee: Behind Right Quarter Trim Panel
Product Wiring Connection Chart (All Models)
MODELS:
- LPA-E4
- LPA2.4 / LPA2.2
- LPA1.4 / LPA1.2
Important Note: This harness is provided with a inline fuse installed.
Please remove prior to install and reinsert once finished.
If your vehicle does not provide ACC source your harness will not have a “RED”
wire to connect.
It will use DC Offset to turn on as well as trigger the “REM OUT” on the LPA.
On LPA-E4 there will be a jumper that you can move based on your application.
This harness is designed to work on OEM NON-AMPLIFIED systems.
Connect the RED BUTT Connector to the aftermarket system turn on for your
amplifiers.
Product Example Installation
4-Channel Amplifier – (HARNESS CUT REQUIRED)
- Cut the harness close as possible to the “CUT HERE AND INSULATE” label. You must insulate wires to prevent damage to OEM radio.
- The cut speaker wires will need to be connected to your aftermarket amplifier.(REFER TO LABEL ON HARNESS)
- Please refer to the chart on the first page for wiring your loose wires to your LPA.
- This harness is designed to work on OEM NON-AMPLIFIED systems.
Mono Amplifier – (HARNESS CUT NOT REQUIRED)
- If using a 2-Channel input LPA use the front speaker wires and insulate the remaining rear speaker wires.
- DO NOT CUT the speaker wires in-between the “CUT HERE” Labels in order to keep the factory speakers functional.
- This harness is designed to work on OEM NON-AMPLIFIED systems.
© 2021 AAMP Global.
All rights reserved.
PAC is a Power Brand of AAMP Global. PAC-audio.com
PRODUCT ANC vs Amplifier
- Amp is larger/Black
- ANC is small/Silver
- Amp has 3 plugs
- ANC has 2 plugs
ANC / Amp Location 2019+ RAM 1500
ANC / Amp Location 2019+ RAM 2500/3500
ANC / Amp Location Jeep Cherokee
ANC / Amp Location Chrysler Pacifica
ANC Location 2015-2016 Grand Cherokee
©2018 AAMP Global • All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>