NUTRI NINJA BL580 With Freshvac Technology Owner’s Guide

THANK YOU FOR PURCHASING
The Nutri Ninja® with FreshVac™ Technology

REGISTER YOUR PURCHASE
registeryourninja.com
1-877-646-5288
Scan QR code using mobile device

RECORD THIS INFORMATION
Model Number: ____
Serial Number: _____
Date of Purchase: __
(Keep receipt)
Store of Purchase: __

THIS BOOK COVERS
MODEL NUMBER:
BL580
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Power: 1100 Watts
CUP CAPACITY:
24 oz (2 cups)

PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
These instructions are designed
to help you get a complete
understanding of your new Nutri
Ninja with FreshVac Technology.
If you have any questions, please
call our Customer Service line at
1-877-646-5288

TIP: You can find the model and serial
numbers on the QR code label located on
the back of the unit by the power cord.

CONTENTS
Important Safeguards………………………………………4
Getting to Know Your
Nutri Ninja® with FreshVac™ Technology……8
Parts………………………………………………………………..9
Before First Use……………………………………………..10
Installing the Batteries…………………………………….10
Using an Optional AC Adapter……………………….10
Using the Control Panel………………………………….11
Vacuum Blending with the
Single-Serve FreshVac Cup …………………………….12
Care & Maintenance ………………………………………16
Cleaning …………………………………………………………16
Storing ……………………………………………………………16
Resetting the Motor Thermostat ……………………16
Troubleshooting Guide ………………………………….17
Replacement Parts ………………………………………….18
Product Registration ………………………………………18
Warranty ………………………………………………………..19

IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE

Read all instructions before using your
NUTRI NINJA® WITH FRESHVAC™ TECHNOLOGY
When using electrical appliances, basic safety precautions
should always be followed, including the following:

WARNING
To reduce the risk of fire, electric
shock, serious injury, death, or
damage when using this appliance,
follow these basic safety precautions.

General Precautions
1. Read all instructions prior to using
the appliance and its accessories.
2. Carefully observe and follow all
warnings and instructions. This unit
contains electrical connections
and moving parts that potentially
present risk to the user.
3. ALWAYS exercise care when
handling the Pro Extractor Blades®
Assembly. The blades are sharp,
handle carefully. ONLY grasp the
Pro Extractor Blades Assembly by
the outer perimeter of the blade
assembly base. Failure to use care
when handling the blade assembly
will result in a risk of laceration.
4. Take your time and exercise care
during unpacking and appliance
setup. This appliance contains
sharp, loose blades that can cause
injury if mishandled.
5. Take inventory of all contents to
ensure you have all parts needed
to properly and safely operate
your appliance.
6. Turn the appliance off, then
unplug from the outlet when
not in use, before assembling or
disassembling parts, and before
cleaning. To unplug, grasp the
plug and pull from the outlet.
NEVER pull from the power cord.
7. Before use, wash all parts that
may contact food. Follow washing
instructions covered in this
instruction manual.
8. To protect against the risk of
electric shock, DO NOT submerge
the appliance or allow the power
cord to contact any form of liquid.
9. DO NOT use this appliance
outdoors. It is designed for indoor
household use only.
10. This appliance has important
markings on the plug blade. The
attachment plug or entire cordset
(if plug is molded onto cord) is
not suitable for replacement. If
damaged, the appliance shall
be replaced.
11. This appliance has a polarized
plug (one prong is wider than
the other). To reduce the risk of
electric shock, this plug will fit in
a polarized outlet only one way.
If the plug does not fit fully in the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician. DO NOT modify the
plug in any way.

12. DO NOT operate any appliance
with a damaged cord or plug, or
after the appliance malfunctions
or is dropped or damaged in any
manner. This appliance has no
user-serviceable parts. If damaged,
contact SharkNinja for servicing.
13. This appliance has important
information on the plug prong.
The power cord is not suitable for
replacement. If damaged, contact
SharkNinja for servicing in order to
avoid a hazard.
14. Extension cords should NOT be
used with this appliance.
15. DO NOT allow young children
to operate this appliance or use
as a toy. Close supervision is
necessary when any appliance
is used near children.
16. This appliance is NOT intended
to be used by persons (including
children) with reduced physical,
sensory, or mental capabilities, or
lack of experience and knowledge,
unless they are closely supervised
and instructed concerning use
of the appliance by a person
responsible for their safety.
17. Before each use, inspect blade
assembly for damage. If a blade
is bent or damage is suspected,
contact SharkNinja to arrange
for replacement.
18. DO NOT attempt to sharpen blades.
19. DO NOT allow the unit or the cord
to hang over the edges of tables
or counters. The cord may become
snagged and pull the appliance off
the work surface.

20. DO NOT allow any part of the
unit to contact hot surfaces,
including stoves and other
heating appliances.
21. ALWAYS use the appliance on a
dry and level surface.
22. NEVER place a blade assembly
on the motor base without it first
being attached to the cup.
23. Keep hands, hair, and clothing out
of the container.
24. ONLY use attachments and
accessories that are provided with
the product or are recommended
by SharkNinja. The use of
attachments not recommended or
sold by SharkNinja may cause fire,
electric shock, or injury.
25. During operation and handling of
the appliance, avoid contact with
moving parts.
26. DO NOT operate the appliance
with an empty container.
27. DO NOT fill containers past the
MAX FILL or MAX LIQUID lines.
28. DO NOT microwave any containers
or accessories provided with
the appliance.
29. DO NOT perform grinding
operations with the Single-
Serve Cup and Pro Extractor
Blades® Assembly.
30. Before operation, ensure all utensils
are removed from containers.
Failure to remove utensils can
cause containers to shatter and
potentially result in personal injury
and property damage.
31. Keep hands and utensils out of
containers while chopping to
reduce the risk of severe personal
injury or damage to the blender/
food chopper. A scraper may be
used ONLY when the blender or
processor is not running. When
using the processor, always use
food pusher to add food. NEVER
add food by hand.
32. NEVER operate the appliance
without lids and caps in place.
DO NOT attempt to defeat the
interlock mechanism. Ensure the
container and lid are properly
installed before operation.
33. DO NOT expose the containers
and accessories to extreme
temperature changes. They may
experience damage.
34. NEVER leave the appliance
unattended while in use.
35. DO NOT open lid or pour spout
cap while blender is operating.
36. DO NOT blend hot liquids. Doing
so may result in pressure buildup
and steam exposure that can pose
a risk of the user being burned.
37. If you find unmixed ingredients
sticking to the sides of the the cup,
stop the appliance, remove the
lid, and use a scraper to dislodge
ingredients. NEVER insert your
hands into the pitcher, as you may
contact one of the blades and
experience a laceration.
38. DO NOT attempt to remove the
container and lids from the motor
base while the blade assembly is
still spinning. Allow the appliance
to come to a complete stop before
removing lid and container.
39. Upon completion of blending
or processing, ensure the blade
assembly is removed BEFORE
emptying container’s contents.
Remove the blade assembly by
carefully grasping the top of
the shaft and lifting it from the
container. Failure to remove the
blade assembly before emptying
the container results in a risk
of laceration.
40. Remove the Pro Extractor Blades®
Assembly from the Single-Serve
Cup upon completion of blending.
DO NOT store ingredients before
or after blending them in the cup
with the blade assembly attached.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. For ingredient
storage in the cup, use only
Spout Lid to cover.
41. If the appliance overheats, a
thermal switch will activate and
temporarily disable the motor. To
reset, unplug the appliance and
allow it to cool for approximately
30 minutes before using again.
42. The maximum wattage rating for
this appliance is based on the
configuration of the Pro Extractor
Blades Assembly and Single-Serve
Cup. Other configurations may
draw less power or current.
43. DO NOT process dry ingredients
without adding liquid to the Single-
Serve Cup. The Single-Serve Cup is
not intended for dry blending.
44. To protect against risk of electrical
shock, DO NOT immerse the motor
base in water or other liquid.
DO NOT spray the motor base with
any liquids. Turn off and unplug
the motor base before cleaning.
45. WARNING: The maximum wattage
rating for this appliance is achieved
by mixing 350g dried soy beans
with 50g oil on “start/stop” for 15
seconds. Other recipes may draw
less power or current. The unit is
NOT intended for dry blending.
46. DO NOT operate pump
during blending.
47. DO NOT operate pump
upside down.
48 DO NOT immerse pump in water
or any other liquid.
49. DO NOT incinerate this appliance
even if it is severely damaged. The
batteries can explode in a fire.

GETTING TO KNOW YOUR
NUTRI NINJA® FRESHVAC™ TECHNOLOGY

WELCOME!
Congratulations on your
purchase. Use this instruction
manual to learn about the great
features of your Nutri Ninja with
FreshVac Technology. From
assembly to use to maintenance,
you will find it all in here.

If you have any questions, concerns or
feedback, we’d love to hear from you.
Give us a call at 1-877-646-5288 or
visit ninjakitchen.com

MAIN UNIT
A Cup FreshVac Tab
B FreshVac Pump
C Twist-Off Reservoir
D Flip & Seal Lid
E 24 oz. Single Serve
FreshVac Cups (x 2)
F Pro Extractor Blades®
Assembly
G Motor Base with Power Cord
H Spout Lid (x 2)

PART

BEFORE FIRST USE

IMPORTANT: Review all warnings
on pages 4-7 before proceeding.

DID YOU KNOW?
• You can take your drinks on the go
using the spout lids.
• The cups, blade assembly, and lids are
BPA free and dishwasher safe.

NOTE : Handle the Pro Extractor Blades®
Assembly by grasping around the
perimeter of the blade assembly base.

NOTE: All attachments are dishwasher
safe. It is recommended that the
cups, lids, twist-off reservoir, and
blade assembly be placed on the
top rack of the dishwasher. Ensure
blade assembly and lid are removed
from the cup before placing in the
dishwasher. Exercise care when
handling blade assembly.

1. Remove all packaging materials
from the appliance. Exercise care
when unpacking blade assembly.
The blade assembly is sharp.
2. Wash cups, lids, and blade assembly
in warm, soapy water using a
dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assembly, as the blades are sharp.
3. Thoroughly rinse and air-dry all parts.
4. Wipe touchscreen with a soft,
damp cloth. Allow it to dry
completely before using.

INSTALLING THE BATTERIES
1. Unscrew the FreshVac™ Pump’s
power button cap and remove the
spring-loaded battery cover.
2. Install 6 AA alkaline batteries
(included), ensuring the +/-
symbols on the batteries match
the markings on the battery cover
and battery housing.
3. Replace the battery cover, making
sure it is fully seated and clicked
in place.
4. Screw on the pump’s power
button cap.
NOTE: If the battery cover and power
button cap are not properly installed
or tightly in place, the pump will
not function.

USING AN OPTIONAL
AC ADAPTER
If you prefer to power your FreshVac
pump using a AC Adapter, you may
purchase one on ninja accessories.com.
1. Insert the small round end of the
AC power cord into the jack on
the pump.
2. Insert the 2-pronged plug of the AC
cord into an electrical outlet.
NOTE: Use only an optional AC
adapter manufactured by SharkNinja.
Other after-market adapters are not
compatible with the FreshVac pump.

USING THE CONTROL PANEL

AUTO-IQ® PROGRAMS FOR THE SINGLE-SERVE FRESHVAC™ CUP
Intelligent pre-set programs combine unique blending and pausing patterns
that do the work for you. Once a pre-set program is selected, it will start
immediately. Press the selected program again to pause it.

MANUAL SETTINGS:
START | STOP
Press once to start continuous
running; press again to stop.
Timer counts up by seconds,
up to 60 seconds.
PULSE
Runs only while pressed down.
Short presses create short pulses.
Timer counts up by seconds as
long as button is pressed down.

AUTO-IQ PROGRAMS:
AUTO-IQ SMOOTHIE
Make super-smooth, sippable drinks
and shakes from fresh or frozen
fruit, milk, liquids, and ice.
AUTO-IQ EXTRACT
Ideal for tough, leafy, or fibrous
whole fruits and vegetables,
including their skins, seeds,
and stems.

VACUUM BLENDING WITH THE
SINGLE-SERVE FRESHVAC™ CUP

IMPORTANT: Review all warnings
on pages 4-7 before proceeding.

Vacuum blending recommended
for extractions, smoothies, soups, dips,
and dressings for brighter flavors,
vibrant colors, and improved textures.
Non vacuum blending recommended
for whipped desserts that benefit from
added air and frozen drinks with highly
frozen ingredients for thicker results.

1. Add ingredients to the FreshVac
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.

2. Place the Pro Extractor Blades®
Assembly on the top of the cup
and turn clockwise to seal.
3. Turn cup upside down so the
Flip & Seal Lid is on top and the
bottom of the blade assembly is
flat on the counter.

4. To open the Flip & Seal Lid, press
and lift the latch. Set the FreshVac
Pump on top of the FreshVac Tab.
The pump DOES NOT lock into
place on the lid.

5. To vacuum seal the cup, place the
pump over the tab. Press the power
button on top of the pump to begin
vacuum sealing. The pump will make
a motorized noise and the light on
the pump will illuminate in white
while vacuum sealing is in progress.
You do not need to hold the pump in
place while vacuum sealing.

6. When vacuum sealing is complete,
the pump will shut off automatically
and the green light on the pump
will illuminate.
7. To release the pump from the cup,
press the pump release button on
the bottom front of the pump and lift.

8. Close the Flip & Seal Lid, pressing it
until it clicks into place.
9. To blend ingredients, follow
instructions on the next page.
When blending is complete, pressure
must be released from the cup
through the FreshVac™ Tab before
opening the lid. See step 14 on on
page 15 for more information.

VACUUM BLENDING WITH THE
SINGLE-SERVE FRESHVAC™ CUP – CONT.

IMPORTANT: Review all warnings
on pages 4-7 before proceeding.

10 Place the unplugged motor base
on a clean, dry, level surface such
as a countertop or table. Press
downward on the motor base to
adhere the suction cups to the
work surface. Plug the motor base
into a wall outlet.

11. Turn the Single-Serve FreshVac
Cup upside down and install onto
the motor base. When the unit is
correctly locked into the motor
base, program lights will illuminate.

12. If using a pre-set program, select
the program that best suits your
recipe. The preset feature will
automatically stop the unit at the
end of the program. To pause
the unit at any time, press the
currently active program a
second time. Reference page 11
for program descriptions.

13. When blending is complete, lift
the cup up and out of the motor
base. Pressure must be released
before opening the cup. (see step
14 below). DO NOT store contents
in the cup with the Pro Exactor
Blades® Assembly attached.

14. Open the Flip & Seal Lid by pressing
the tab and lifting. To release the
vacuum seal, gently lift the FreshVac
Tab. Air will enter the cup, making it
easy to remove the blade assembly.

15. Close the Flip & Seal Lid, pressing it
until it clicks into place.

16. Turn cup over so blade assembly
is on top. Rotate blade assembly
counterclockwise to remove. To
take your blended contents on the
go, place the spout lid on cup and
turn clockwise to seal.

17. Unplug the unit when finished. To lift
the motor base, place your hands
underneath both sides of it and
gently pull the unit up and toward
you. Refer to the Care & Maintenance
section for storing instructions.

CARE & MAINTENANCE

CLEANING
1. Separate all parts.
2. Wash all cups in warm, soapy
water with a soft cloth.
3. Hand-Washing
Wash blade assembly in warm, soapy
water using a dishwashing utensil
with a handle to avoid direct contact
with the blades. Exercise care when
handling blade assembly as the
blades are sharp. Thoroughly rinse
and air-dry all parts.
Dishwasher
All attachments are dishwasher
safe. Place the lids, blade assembly,
and twist-off reservoir on the top
rack of the dishwasher ONLY.
Ensure the blade assembly and lid
are removed from the cup before
placing in the dishwasher. Exercise
care when handling blade assembly.
Motor Base
Turn off the unit and unplug the
motor base before cleaning. Wipe
motor base with a clean, damp cloth.
To clean the touchscreen, apply an allpurpose
cleaner to a soft cloth, such as
microfiber, and wipe gently.
NEVER directly spray the base or
touchscreen with water or other liquids.
DO NOT use abrasive cloths, pads, or
brushes to clean base or touchscreen,
as they can dull or scratch the surface.
FreshVac™ Pump
NEVER submerge the pump in water or
other liquid. If you see water or other
liquid in the twist-off reservoir:
1. Remove twist-off reservoir
from pump and wash and dry
it thoroughly.
2. Run pump for 10 seconds to clear
any fluid.
3. Wipe pump clean with a soft cloth.
4. Reattach twist-off reservoir to pump.
STORING
Wrap power cord around cord wrap on
back of motor base. Store unit upright
and store all blade assemblies inside or
attached to their respective containers
with their lids locked into place.
DO NOT store blended or unblended
ingredients in the Single-Serve
FreshVac Cup with the Pro Extractor
Blades® Assembly attached. Use only
the spout lid when storing blended or
unblended ingredients in the cup.
DO NOT stack items on top of
the cups. Store any remaining
attachments alongside the unit or
in a cabinet where they will not be
damaged or create a hazard.
RESETTING THE MOTOR
THERMOSTAT
This unit features a unique safety
system that prevents damage to
the motor and drive system should
you inadvertently overload it. If the
unit is overloaded, the motor will be
temporarily disabled. Should this occur,
follow the reset procedure below.
1. Unplug the unit from the
electrical outlet.
2. Allow the unit to cool for
approximately 15 minutes.
3. Remove the cup’s blade assembly.
Empty the cup and ensure no
ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that
maximum capacities are not
exceeded. This is the most typical
cause of appliance overload.
If your unit needs servicing,
please call Customer Service
at 1-877-646-5288.

TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power off and unplug unit before troubleshooting.

Unit doesn’t turn on.
• Make sure unit is plugged in.
• Place cup on base and rotate it clockwise until it clicks into place.
Unit doesn’t turn off.
• Remove cup from base by rotating it counterclockwise and lifting it. Unplug the power
cord from the outlet.
Doesn’t mix well; ingredients get stuck.
• Using the pre-set programs is the easiest way to achieve great results. The pulses and
pauses allow the ingredients to settle toward the blade assembly. If ingredients are
routinely getting stuck, adding some liquid will usually help.
• When filling the cup, start with fresh fruit or veggies, then leafy greens or herbs. Next add
liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or frozen ingredients.
Motor base won’t stick to counter or tabletop.
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces.
• Suction feet will not stick on some surfaces such as wood, tile, and non- polished finishes.
• DO NOT attempt to use unit when the motor base is stuck to a surface that is not
secure (cutting board, platter, plates, etc.).
Unit is difficult to remove from counter for storage.
• Place your hands underneath both sides of the motor base and gently pull the unit up
and toward you.
FreshVac™ Pump won’t turn on.
• Ensure that working batteries are installed correctly in the pump, and the battery cover
is securely in place.
• If using an optional AC adapter, make sure it is manufactured by SharkNinja. Other
after-market adapters are not compatible with the pump.
• If using a SharkNinja AC adapter, make sure the connector is inserted fully into the pump.
FreshVac Pump won’t turn off.
The pump will shut off automatically once a vacuum seal is achieved. If a vacuum seal is
not achieved, you will be able to remove the pump from the lid. If this happens, turn off
the pump and check the following:
• Make sure the Pro Extractor Blades® Assembly is tightly attached to the cup.
• Ensure the FreshVac Tab on the Flip & Seal Lid is properly installed.
DO NOT remove the tab from the lid.
Accidentally removed the FreshVac tab and need to reinstall.
• In a case you accidentally remove the FreshVac Tab and need to reinstall, follow these
easy steps. First ensure the FreshVac Tab matches up with the opening on the Flip &
Seal Lid. Next, align the bottom side of the tab to match the shape of the opening on
the cup. Then press the tab down until it is seated flat.

TROUBLESHOOTING GUIDE – Cont.

Can’t remove Pro Extractor Blades® Assembly from cup.
• Cup will be vacuum sealed shut after using the FreshVac™ Pump.
• Release the vacuum seal by gently pulling up on the FreshVac Tab.
FreshVac Pump does not lock onto cup.
• Pump will not lock onto cup. Once pump is activated, the pump will seal
to the cup and become secure.
FreshVac Pump is stuck on the cup.
• To release the pump from the cup, press the pump release button (up arrow)
and lift up.
What do the lights on the FreshVac Pump mean?
• White LED light indicates the pump has been activated and vacuum sealing
is in progress.
• Green LED light indicates vacuum sealing is complete. Pump will automatically
shut off when complete.
• A blinking light indicates the batteries have been loaded incorrectly or need
to be replaced.

REPLACEMENT PARTS
To order additional parts and accessories, visit ninjaaccessories.com
or contact Customer Service at 1-877-646-5288.

PRODUCT REGISTRATION
Please visit registeryourninja.com or call 1-877-646-5288 to register
your new Ninja® product within ten (10) days of purchase. You will be
asked to provide the store name, date of purchase, and model number
along with your name and address.
The registration will enable us to contact you in the unlikely event of a
product safety notification. By registering, you acknowledge you have
read and understood the instructions for use and warnings set forth in
the accompanying instructions.

The 1-Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the
original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship
for a period of 1 year from the date of purchase when it is used under normal household
conditions and maintained according to the requirements outlined in this instruction manual,
subject to the following conditions and exclusions.

What is covered by my warranty?
1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole
discretion, will be repaired or replaced for up to 1 year from the original purchase date.
2. In the rare event that a replacement unit is issued, the warranty coverage ends 6 months
after the receipt date of the replacement unit or the remainder of the existing warranty,
whichever is greater. If the unit is replaced, SharkNinja reserves the right to replace the
unit with one of equal or greater value.
What is not covered by my warranty?
Our Customer Service and Product Specialists are available to provide all the warranty
service options available to you, including the possibility of upgrading to our VIP Warranty
Service Options for select product categories.
1. Normal wear and tear of wearable parts (including all blending vessels, lids, blades,
blender base, and pump) that require regular maintenance and/or replacement to
ensure the proper functioning of your unit are not covered by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. SharkNinja will cover the cost for the customer to send the unit to us for repair or
replacement. A fee of $19.95 for return shipping costs will be charged at the time of
return shipment of the repaired or replacement unit.
4. Damage caused by misuse, abuse, or negligent handling, or damage due to
mishandling in transit.
5. Consequential and incidental damages.
6. Defects caused by or resulting from damages from shipping or from repairs, service, or
alteration to the product or any of its parts that have been performed by a repair person
not authorized by SharkNinja.
7. Products purchased, used, or operated outside of North America.
Problems with your unit/How to get service:
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, visit ninjakitchen.com for product care/maintenance self-help.
Our Customer Service and Product Specialists are also available at 1-877-646-5288 to assist
with product support and warranty service options.
How to initiate a warranty claim:
You can call 1-877-646-5288 to have a Customer Service specialist assist you. Please note,
you must call 1-877-646-5288 to initiate a warranty claim. Return and packing instruction
information will be provided at that time.
For Customer Service hours, visit ninjakitchen.com
Replacement parts are available for purchase at ninjaaccessories.com. For more information
on what are classified as wearable and non-wearable parts, visit ninjakitchen.com/warranty
This warranty gives you specific legal rights, and you may also have other rights that vary
from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages,
so the above may not apply to you.

VISIT US ONLINE AT:
ninjakitchen.com
Or follow us on any of our social media pages:
Facebook.com/ninjakitchen
Twitter.com/ninjakitchen
Instagram.com/ninjakitchen
Pinterest.com/ninjakitchen
Youtube.com/epninjakitchen
NUTRI NINJA BL580 With Freshvac Technology Owner’s Guide – Download [optimized]
NUTRI NINJA BL580 With Freshvac Technology Owner’s Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>