IKEA KF330019 Display Cabinet User Guide
- June 10, 2024
- Ikea
Table of Contents
IKEA KF330019 Display Cabinet
MPORTANT
ANTI-TOPPLE WARNING!
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
IMPORTANT!
- It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly,and once every 3 months – in order to assure stability throughout the lifespan of the product.
- For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.
- Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.
Display Cabinet
The Display Cabinet is designed to store and showcase items in a stylish
and organized way. It comes with various components such as plates, wooden
dowels, cam locks, screws, hinges, handles, etc. that need to be assembled to
create the cabinet.
Tools
Product Components
When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size.
- A x 31
- B x 31
- C x 26
- D x24
- E x 8
- F x 48 (6 x 34 mm, 15 x 12 mm, and 4 x 16 mm)
- G x 8 (6 x 10 mm)
- H x 2 (8 x 30 mm)
- J x 4 (4 x 14 mm)
- K x 1
- L x 1 (4 x 16 mm)
- M4 x 22 mm
Product Usage Instructions
- Start by inserting quickfit screws (A) into corresponding holes in plates No.8,9,10 using a screwdriver as shown in step 1.
- Connect No.9 and No.10 with the No.11 plate using wooden dowels (C) and turn cam locks (B) clockwise to tighten as shown in step 2.
- Attach the assembled component to No.2 with wooden dowels (C) and turn cam locks (B) clockwise to tighten as shown in step 6.
- Insert quickfit screws (A) into corresponding holes in No.3 and No.4 plates using a screwdriver as shown in step 4.
- Knock wooden dowels (C) into the No.5 plate first. Then, connect No.3 and No.4 with No.5 and No.7 plates, and turn cam lock (B) clockwise to tighten as shown in step 7.
- Attach the assembled component to No.3,4 with wooden dowels (C) and turn cam locks (B) clockwise to tighten as shown in step 8.
- Insert quickfit screws (A) into corresponding holes in the No.1 plate using a screwdriver as shown in step 9.
- Cover No.1 plate to the top with wooden dowels (C) and turn cam locks (B) clockwise to tighten as shown in step 10.
- Fix No.13 back plates with screws (D) and cover strip (L) to the gap between the two back plates as shown in step 11.
- Insert part (G) into No.3 and No.4 plates, and put No.6 shelf in as shown in step 13.
- Fix hinge (E) to No.12 plate with screw (F). Fix handle (H) with screw (J) as shown in step 14 on page 11.
- Attach No.12 doors to No.3 and No.4 plates by fixing hinges with screws (F) as shown in steps 15 and 16.
- Install an anti-tipping device (K) as shown in step 17.
Parts List
Installation
Insert quickfit screw(A) into corresponding holes in No.8,9,10 plates with a screwdriver as shown.
Connect No.9 and No.10 with the No.11 plate using a wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown.
Connect No.9 and No.10 with the No.8 plate using a wooden dowel(C) and turn
cam lock(B) clockwise to tighten as shown.
Insert quickfit screw(A) into both sides of the No.2 plate with a screwdriver
as shown.
Attach the assembled component to No.2 with a wooden dowel(C) and turn cam
locks(B) clockwise to tighten as shown.
Insert quickfit screw(A) into corresponding holes in the No. 3 and No.4 plates
with a screwdriver as shown.
Knock wooden dowel(C) into the No.5 plate at first. Connect No.3 and No.4 with No.5 and No.7 plates, and turn cam lock(B) clockwise to tighten as shown.
Attach the assembled 2 components to No.3,4 with a wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
Insert quickfit screw(A) into corresponding holes in the No.1 plate with a screwdriver as shown.
Cover No.1 plate to the top with a wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
Fix No.13 back plates with screw(D) as shown.
Cover strip(L) to the gap between the two back plates.
Insert part(G) into No.3 and No.4 plates, and put No.6 shelf in as shown.
Please don’t use an electric screwdriver or use force to rotate, may cause cracks. Fix hinge(E) to the No.12 plate with screw(F) as shown. Fix handle(H) with screw(J) as shown.
Please don’t use an electric screwdriver or use force to rotate, may cause cracks. Attach the No.12 door to the No.3 plate by fixing the hinge with screw(F) as shown.
Please don’t use an electric screwdriver or use force to rotate, may cause cracks. Attach another No.12 door to the No.4 plate by fixing the hinge with screw(F) as shown.
Install the anti-tipping device(K) as shown.
Warranty Information
The product comes with a warranty that covers all areas and is valid for items bought in the US. Warranty claims can be made for defective or damaged items. Please follow the instructions given in the user manual for returns and warranty claims.
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange it within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried, and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention, please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
- After use, the damage and scratches on the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
If you have purchased and have simply changed your mind, follow the retailer’s
instructions for returns.
DEFECTIVE ITEMS
If your item is defective in any way, i.e. it doesn’t work but you can’t
identify why, in the first instance, please call us.
DAMAGED ITEMS
If you receive an order with obvious shipping damage from the retailer, then
we suggest the delivery is refused. If the delivery has been accepted and then
shipping damage is found, please follow the specific instructions advised by
the retailer. In all circumstances please save all packaging material and
paperwork for the order. Please be aware that if you dispose of packaging
material or attempt to return the merchandise without contacting the
fulfiller, your chances of making a claim, and you may not receive a credit
for the return.