iFIT MP27-Argon2-E Tablet for Treadmill Instructions
- June 10, 2024
- iFIT
Table of Contents
Instructions for the iFIT TABLE
operation
一，installation instructions
1、The 27table shipped by Yiwei is shown in the figure below：
MP27-Argon2-E Tablet for Treadmill
2、The following detailed introduction and the assembly method of the
plastic shell are provided for customer reference, and customers can match any
shape design according to the requirements of the module 3D:
二，operation declaration
- After power-on, the display picture is such as (Figure 1)
- Click “ ” button to enter the next page and connect to WiFi network (Figure 2)
- After successful network connection: click the setting language, the default ” ” language need not be modified (Figure 3), directly click ” ” to enter the next page such as (Figure 4)
- Click the ” ” button in the top right corner (Figure 4) to enter the following picture (Figure 5)
4. Click the ” CONTINUE WITHOUT iFTI ” button to enter the main interface page (Figure6)
- Click “ ” in the upper left corner of (Figure 6) to enter the (Figure 7) page;
- Click (Figure 7) after the button “ ” starts; the page display (Figure
- Click “ ” will enter the exercise warm-up page (Figure 9)
- Click (Figure 9) ” ” and ” ” to adjust the speed and slope such as (Figure 10)
- Click “ ” to connect to the Bluetooth headset, heart rate device, click connect to connect to the searched device (Figure 11, Figure 12), click any page Bluetooth connection pop-up page will be hidden.
- After the warm-up, enter the video playback page (Figure 13), and the speed and slope adjustment are the same as the above
- Click any page (Figure 13) screen to enter the setting page (Figure 14) to adjust the volume, open the subtitles, connect the Bluetooth device, and end the movement
- Click ” ” to end the movement to the relaxation page (Figure 15)
- Click “ END COOLDOWE ” to end the movement to view the movement report (Figure 16)
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
IC Caution: This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
Manufacturer’s Name: IFIT HEALTH & FITNESS, INC.
Product Name: Tablet
Trade Mark: iFIT
Model number: MP27-Argon2-E, MP27-Argon2X-E
This device is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. All essential radio test suites
have been carried out.
The device complies with RF specifications when the device used at 20cm from
your body.
The product shall only be connected to a USB interface of version USB2.0
RF Secification:
| Function | Operation Frequency | Max RF outputpower: | Limit |
|---|---|---|---|
| BLE | 2402MHz-2480MHz | 9.12dBm | 20 dBm. |
| BT(BR+EDR) | 2402MHz-2480MHz | 9.18dBm | 20 dBm. |
WIFI 802.11 b/g/
n(HT20,HT40)| 802.11 b/g/n(20MHz): 2412-2472MHz;
802.11n(40MHz):2422-2462MHz| 16.58dBm| 20 dBm.
Wi-Fi
5.2G(802.11a/n20/n4
0)| 802.11a/ n20: 5180-5240MHz
802.11 n40: 5190-5230MHz| 9.99dBm| 23 dBm.
Wi-Fi
5.3G(802.11a/n20/n4
0)| 802.11a/ n20: 5260MHz-5320MHz
802.11n(40MHz):5270-5310MHz| 9.95dBm| 23 dBm.
Wi-Fi
5.6G(802.11a/n20/n4
0)| 802.11a/ n20: 5500MHz-5700MHz
802.11 n40: 5510MHz-5670MHz| 9.93dBm| 23dBm.
Wi-Fi
5.8G(802.11a/n20/n4
0)| 802.11a/n20:5745MHz-5825MHz
802.11 n40:5755MHz-5795MHz| 9.79dBm| 13.98 dBm.
5150-5250MHz product for indoor use only
The use for 5.15-5.35GHz RLAN band is restricted to indoor use. This
restriction will be
applied to all Member States of European Union.
DECLARATION OF CONFORMITY
I hereby declare that the product
Product Name: Tablet
Product Description: Tablet
Model: MP27-Argon2-E,MP27-Argon2X-E
Tradename or Brand(s): iFIT
(Name of product, type or model, batch or serial number)
Antenna : FPC Antenna 2.16 dBi
Hard Ware Version: MT8163-21.5TG-A0
Soft Ware Version:
com.ifit.eru-2.0.5.1213.apk,com.ifit.standalone-2.6.78.3818.apk,
com.ifit.launcher-1.0.17.22.apk
FW Version: Android 9
Satisfies all the technical regulations applicable to the product within the
scope of Council Directives 2014/53/EU and declare that the same application
has not been lodged with any other notified body.
ETSI EN 300 328 V2.2.2 (2019-07)
ETSI EN 301 893 V2.1.1 (2017-05)
ETSI EN 300 440 V2.2.1 (2018-07)
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-3 V2.1.1 (2019-03)
ETSI EN 301 489-17 V3.2.4 (2020-09)
EN 55032:2015+A11:2020
EN 55035:2017+A11:2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN IEC 62311:2020
EN 62368-1:2014+A11:2017
(Title(s) of regulations, standards, etc.)
All essential radio test suites have been carried out.
NOTIFIED BODY: MiCOM Labs Inc
Address:
575 Boulder Court
Pleasanton
CA 94566, USA
Identification Number: 2280
MANUFACTURER or AUTHORISED REPRESENTATIVE:
Address:
ELectronic Way Technology Co., Ltd
No.268, South Jiguang Rd ShiPu Town, KunShan, JiangSu china 215342
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>