Viewtech VT-R1565 Roof Mount-Wall Mount Monitor User Manual

Roof Mount/Wall Mount Monitor User
Manual

5 Series
Please read the user manual carefully before installation and operation

VT-R1565 Roof Mount-Wall Mount Monitor

This type is specially designed for Bus, Marine, MPV, Train entertainment.
In order to ensure that you will use the monitor correctly, please read this manual carefully before installation. Moreover, the safety items are supposed to be paid more attention to. Please do keep this user manual for later review.

Safe Use Instructions And Precautions：

•  Don’t pry the screen by tools
• Voltage input:9v-36v, Don’t connect 220v directly
•  Keep away from rain and damp places
• Danger high voltage inside! Laypeople is forbidden to open it
•  Installation position must strength enough to keep the weight and bumped while driving
•  Keep away form the direct sunlight and other heat source
•  Turn off the power first when something or liquid falls into the monitor, and send to professional mechanic for repairing before using
• Don’t use the sharp objects carved the monitor surface
• Turn off the power and using the clean cotton ball or soft

Please contact with dealers if below solutions can not help you solve the problems

• cloth to wipe when there is dirt on screen,Don’t use any other Inorganic and organic solvents.

Product Features：

• Brand New A grade LED/LCD Screen Panel
• Fast dynamic response
• No X-ray, Meet the demand of environmental protecting standard
• High resolution & Real color and image (Truly display image)
• Wide Viewing Angle, High brightness and good contrast
• 5 seconds power delay, with overvoltage and undervoltage protection, not impulsed by the high / low voltage to extend the device’s lifespan
• Support to play 1080P HD video
•  Support spot advertisement (optional)
• Support resume from break-point memory (optional)
• Support water subtitles: up&down / subtitle’s color /subtitle’s background color can be adjusted by remote controller (Optional)
• Support USB/SD/CF, Max. 32GB (Optional)
• Support Software Upgrading

AV Monitor Series

a、Connection: This machine built-in 9V~36V regulated DC power supply, use the Car battery for DC power supply. The red line is connected to the positive electrode, and the black wire is connected to the negative electrode.
Note: do not directly connect the power cord to the AC power, otherwise it will cause damage to the parts!
b、Video signal connect: (Figure 1) the car video signal source output from the machine AV input port, RCA yellow connector identifies AV1 and AV2 channels respectively.

Android Monitor Series

• Operated by remote controller or USB Mouse Figure 11 24”Monitor
• Be compatible with different kinds of APK Software
• With 1 Audio Output
  a、Open the lock with key and take out the metal cover as per figure 2
  b、Connecting the cables well and insert SD or USB card as per figure 3

Connection: This machine built-in 9V~36V regulated DC power supply, use the Car battery for DC power supply. The red line is connected to the positive electrode, and the black wire is connected to the negative electrode.
Note: do not directly connect the power cord to the AC power, otherwise it will cause damage to the parts!

Remote Controller-Operation manual

a、Remote controller in figure 4 is to control monitors’s on/off, switch AV1/AV2/VGA/HDMI mode；

b、Remote controller in figure 5 is to control SD/USB monitors’s on/off, switch AV1/AV2/VGA/HDMI/SD/USB mode；

Figure 5 Remote Controller for AV Monitor with SD/USB
c、Remote controller in figure 6-7 is to control android monitor’s on/off, channel mode.

Product Dimension Diagram (Unit: MM ）

Figure 8 15.6”Monitor

Figure 11 24”Monitor

• Android 4.4 O.S.Optional Android 8.1 or higher

Technical Specification:

Model No.
Spec.| VT-R1565| VT-R1855| VT-R2155| VT-R2405
---|---|---|---|---
Screen Size| 15.6″| 18.5″| 21.5″| 24″
Aspect ratio| 16:09| 16:09| 16:09| 16:09
Resolution| 1366 x 768| 1920×1080
Response
Time| <15ms
Brightness| 250cd/rr?| 250cd/rr?| 250cd/nf| 250cd/rr?
Contrast| 500: 1| 1000: 1| 1000: 1| 1000: 1
Viewing Angle| 45/45/20/4
5| 85/85/80/80 (Typ.) (CR
10)(Left/Right/Up/Down)
Power Supply| DC9V-36V
Consumption| <20W| <20W| <40W| <50W
Video System| NTSC/PAL System
Working
Temperature| -20°C-60°C
Weight| 3.1Kg| 5.0Kg| ..8Kg| 9.5Kg
Size/mm| 393.5×342.7×50.7| 458.4×282.4 x48.7| 524.6×316.1 x49.2| 576×345.4 x48.7

Installation Caution：

1. Firstly, with the machine scheduled to be installed in the position, use a pencil to mark the roof installation position on the wall.
2. Removed the top frame , according to the last step do mark the top shelf and scheduled in installation position on the outlet with mark, drill a hole on the wall of the marked installation position, pull out the vehicle’s power wire and signal wire from the round hole. (refer to figure 8-11)
3. Put the top frame on the wall and marked position ( wire outgoing through from the roof top ), followed by using M5 x 40 round with dielectric full thread drill tail screw the top frame fixed on the vehicle’s roof.
4. Connect correctly both the the power wire and video signal wire. (pls refer to the “wiring instructions”) then fixed the machine on the top shelf.

Fault Clearance

or not, and heck car power supply works normally or not
image show abnormality| Please check video cable connection correct or not , and check  he signal source works normally or not

Accessories

Accessories List

Monitor| 1| PC|
User Manual| 1| PC|
Remote
Controller| 1| PC|
Installation
Screws| 6| PCS| With in the box
Key| 2| PCS|

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>