Danfoss TP5001 Programmable Room Thermostat User Guide

: June 10, 2024
: Danfoss

Table of Contents

LCD Overview
Buttons
Power ON/OFF
Setting the Temperature
Select Away Mode
Set Date & Time
Frost Protection Temperature
Advanced Programmable Timer
Set Control Parameters
Error Messages
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Danfoss TP5001 Programmable Room Thermostat User Guide

LCD Overview

Symbols| Function description| | Symbols| Function description
---|---|---|---|---
Mon – Sun| Current set day| **| Heating active
1 2 3 4| Current on/off period| **| Frost protect active
| Current set time / parameter number in setup| | Schedule mode
| Room temperature| **| Away mode
Symbol | ** Temperature indication| | RF Status (TP5001RF only)
| Set temperature| ****| Battery low indicator (TP5001B & TP5001RF only)

LCD Overview

Buttons

Symbols	Function description
Power on/of
Timer and program operation
M	Mode change / option setting
Mode change / option setting

Power ON/OFF

Turn the thermostat ON or OFF (standby) by pressing .

Setting the Temperature

Press < or > at any time to change the desired temperature value. SET is shown in the display.
When releasing < or >, the display returns to showing the actual temperature.
The adjustment step is 0.5 °C.

Select Away Mode

Press M to enter Away mode and will be displayed.
Away mode temperature can be set in parameter settings, P07.
Press M again to exit Away mode.

Set Date & Time

Press ; Year digit Flashes. Press < or > buttons to adjust year.
Press again ; Month digit flashes. Press < or > buttons to adjust month.
Press again ; Day digit flashes. Press < or > buttons to adjust day of the month.
Press again ; Hour digit flashes. Press < or > buttons to adjust hour.
Pres again: ; Minute digit flashes. Press < or > buttons to adjust minute.
Press to exit , automatic exit after 20 seconds, any changes are retained.

Frost Protection Temperature

You can switch the thermostat OFF (Standby) by alternately pressing . In OFF (Standby) mode, the thermostat is set to a Frost Protection temperature setting and will switch On only if the measured temperature falls below this temperature (5 °C by default).
The frost protect icon and current temperature will be displayed.

Advanced Programmable Timer

The Advanced Programmable Timer mode enables the setting of a timer-controlled program for automatic comfort temperature, and an energy-saving lower setback temperature if standard room comfort temperature is not required.
Example below for 5/2 day setup, 4 Temperature settings.

The function consists of 2 programs:
P1 with 4 events in 5 days (Mon. Tue. Wed. Thu. Fri.) P2 with 4 events in 2 days (Sat. Sun.)

P1: Press for 3 secs to display Mo. Tu. We. Th. Fr.
P1, Event 1:

Use < or > to select the start hour.
Press to accept the setting
Use < or > to set the minute.
Press to accept the setting.
Use < or > to select the temperature.
Press to accept the setting.
P1, Event 2-4: Repeat the Event 1 procedure for programming Event 2-4.

| P2: Sa. Su. are now shown in the display.
P2, Event 1:

Use < or > to select the start hour.
Press to accept the setting.
Use < or > to set the minute.
Press to accept the setting.
Use < or > to select the temperature.
Press to accept the setting.
P2, Event 2-4: Repeat the Event 1 procedure for programming Event 2-4.

---|---

f schedule working mode is set to 24hr, only P1 program will be available, see parameter P01. Mo. to Su. will be set together with the same times and temperatures.
The thermostat will continue the 4-event program based on the present time and day.

To set and change the room temperature temporarily:

Press < or > at any time to change the desired temperature value. SET is shown in the display.
When releasing the < or >, the display returns to showing the actual temperature. This temperature change is only temporary and will be maintained only until the next programmed setting!

A default program provides timer control if the customer does not create own programs:

Days	Event 1	Event 2	Event 3	Event 4
Start time	Temp.	Start time	Temp.	Start time
Mo. – Fr.	6:30	20° C	8:30	15° C
Sa. – Su.	7:30	20° C	9:30	15° C

24hr mode default program same as Mo. – Fr. above.

Set Control Parameters

• Press M button for 6 seconds to enter the parameter setting mode. Press M for parameter selection and set the parameter range via < or >. Complete all adjustments.
To exit press , which is available for this purpose (automatic exit after 20 seconds with no operation).

The digits indicate the set value as follows:

No.	Parameter settings	Settings range	Default
**** P01	**** Working mode

Manual
Schedule timer 5/2 day
Schedule timer 24hr

| **** 02
P02| Heat control mode|

On/off load compensation
On/off standard

| 01
P03| Heat control start-up mode|

Normal start control
Delayed start control
Optimised start control

Error Messages

E1	Sensor failure
EE	EEPROM failure
Lo	Measured temperature below 0 °C
Hi	Measured temperature above 50 °C
E3	RF Pairing failed
E4	RF Signal lost
E6	Real Time Clock (RTC) faliure

Danfoss Limited XA
Climate Solutions danfoss.uk 0330 8086 888 customerservice.uk@danfoss.com Danfoss Ltd., Building 4, Uxbridge Business Park, Sanderson Road, UB8 1 DH, Uxbridge, Buckinghamshire, UK.

Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product.