HNK RAX1810 Smart Wi-Fi Router User Manual

Quick Installation Guide

RAX1810 Smart Wi-Fi Router

I. Set up the new router for internet access

Step 1: Enter the IP address.

1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter 192.168.0.1 to open a login window.
3. In the Password field, type the password to log into the management interface. The default admin password is empty.

Note: The password you entered in this step is not the Wi-Fi password, it is the password for the router’ s management interface. If you cannot log into the web UI of the router, refer to the Q1 in FAQ.

Step 2: Open the configuration wizard page

If this is the first time using the router, the page will automatically jump to the configuration wizard page. If the configuration wizard page doesn’t show up, you can click the “Settings>>Wizard” for your initial setup.

Step 3: Configure your internet connection

Please select your Internet connection type.

Step 4: Set up your Wi-Fi

To setup a Wi-Fi network you need to give your Wi-Fi network a name(SSID) and password.

Step 5: Set your device admin password

By default, your new device does not have a password configured for administrator access to the Web-based configuration utility. To secure your new device, please create a password below.

Step 6: Check out the setting summary and finish initial setting

A setting summary will show up to you for checking. If everything is okay, click on “Next” to finish the initial setting steps.

Guest Network

1. Please log in to the management page. The IP address is “192.168.0.1”.
2. Click “Settings>>Wireless>>Guest Zone” to the guest network setting page.
3. Configure the settings for your guest, including time limit, internet resources, 2.4GHz settings.
4. Click on the “Save” button to save your configuration settings. Then you can separate your network route to your guest.

Dual Band Settings

1. Please log in to the management page. The IP address is “192.168.0.1”.

2. Click “Settings>>Wireless” to the wireless setting page.

3. Turn off the “Smart Connect” button, then show on the dual band settings.

4. Configure the router 2.4G or 5G Wi-Fi SSID and password.

5. If you want more settings of the dual band, click on “Advance Set tings” . Then the advance settings interface will show on.

6. Click on the “Save” button to save your configuration settings.
   Scan to download the HNK Router App or get it on App Store or Google Play.
    

HNK Router App User Guide

1. Download the HNK Router App and connect to the wifi network to get started with Setup Wizard
2. Please select “Dynamic (DHCP)” for the internet connection type
3. Set the WiFi name and Password for the network
4. Please confirm your network settings and finish setting up

Note: Set up the router with the web browser before using the APP to manage your Wifi network

Manage the Dual-band feature on the HNK Router App

1. Login to the HNK Router App to start managing your network
2. As shown is the detailed data of your network
3. Find “Basic Configuration” in the selection menu
4. As shown are the options under “Basic Settings”
5. Select “WiFi Advanced Settings” to start manage the dual-band feature of your router

More Features

In addition to some of the settings described above, there are more functions. Including QOS, Firewall, Port Mapping, Static Route, etc. For more instructors, please refer to the website: https://hnk.after-service.vip

II. Hardware

1. Power LED

2. Internet LED

3. LAN LED

4. 2.4G LED

5. 5G LED

6. WPS LED

7. Reset

8. WPS Button

9. WAN Port

10. LAN Ports

11. DC in

III. FAQ

1.Q: Why can’t I log in to the web UI of the router?
A: Step 1: Please confirm that your devices connect to the HNK-AX1800 router.
Step 2: Please confirm if your IP address is “192.168.0.1”.
Step 3: Please confirm both the user name and password is “admin”.

2.Q: How can I reset the router?
A: Method 1: When the power is on, sting the router’s “Reset” pinhole for 10 seconds to restore the factory settings.
Method 2: Please log in to the management page (IP address is “192.168.0.1”) and click the “Management>>System Admin>>System”, then click on “Restore Factory” button to restore the factory setting.

3.Q: How can I change my admin password?
A: Please log in to the management page (IP address is “192.168.0.1”) and click the “Management>>System Admin”. In this interface, you can change the admin password.

4.Q: How to change my network name and password?
A: Please log in to the management page (IP address is “192.168.0.1” ) and click the “Settings>>Wireless”. In this interface, you can change your network name and password.

5.Q: How can I select my connection type?
A: Please log in to the management page (IP address is “192.168.0.1”) and click the “Settings>>Internet”. In this Interface, you can choose your connection type.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

HUIZHOU MTN WEIYE TECHNOLOGY DEVELOPMENT CO.,LTD.
Address: NO.2 Huitai Road,Huinan High-tech Industrial Park,Huiao Avenue,Huizhou City,
Guangdong Province,China

More detailed instruction can be downloaded from www.hnknet.com

Package Contents
Wireless Router × 1
Power Adapter × 1
Quick Installation Guide × 1
Network cable × 1

24hour Online
After-Sales Service
Scan QR Code To Visit
https://hnk.afterservice.vip

References

• SHENZHEN ZK TECHNOLOGY CO., LTD.
• afterservice.vip

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>