Schneider Electric Resi9 MP Flush and Surface Plastic Enclosure Instruction Manual

June 10, 2024
Schneider Electric

Schneider Electric Resi9 MP Flush and Surface Plastic Enclosure

Resi9 MP Product Information

The Resi9 MP is a modular electrical distribution system designed for residential and small commercial applications. It has an IP40 rating, which means it is protected against solid objects greater than 1mm and water splashes from any direction.

The Resi9 MP product package includes:

  • 1 x Resi9 MP enclosure with 2 compartments (1 x2 and 2 x4)
  • 4 x Resi9 MP plug-in circuit breakers type 3 (3 x4 and 1 x2)
  • 1 x Clack! noise filter module

Resi9 MP Product Usage Instructions

Before installation, ensure that the electrical power supply is switched off. Follow the steps below to use the Resi9 MP:

  1. Mount the Resi9 MP enclosure on a flat surface using suitable screws and anchors.
  2. Remove the front cover of the enclosure by pressing the two clips located on the sides of the cover.
  3. Insert the circuit breakers into their corresponding positions in the enclosure. Make sure to use the correct circuit breaker for each application.
  4. Install the Clack! noise filter module in one of the available slots in the enclosure.
  5. Connect the electrical wires to the circuit breakers and noise filter module according to the wiring diagram provided in the user manual.
  6. Close the front cover of the enclosure by pressing it firmly until you hear a click. Make sure that all clips are properly engaged.
  7. Switch on the electrical power supply and test the system to ensure proper functioning.

If you encounter any issues during installation or usage of the Resi9 MP, refer to the user manual or contact Schneider Electric Industries SAS for support.

Assembly Instruction

Schneider-Electric-Resi9-MP-Flush-and-Surface-Plastic-
Enclosure-1

Schneider-Electric-Resi9-MP-Flush-and-Surface-Plastic-
Enclosure-2

Schneider-Electric-Resi9-MP-Flush-and-Surface-Plastic-
Enclosure-3 Schneider-
Electric-Resi9-MP-Flush-and-Surface-Plastic-Enclosure-4

Schneider-Electric-Resi9-MP-Flush-and-Surface-Plastic-
Enclosure-5

Schneider-Electric-Resi9-MP-Flush-and-Surface-Plastic-
Enclosure-6

Schneider-Electric-Resi9-MP-Flush-and-Surface-Plastic-
Enclosure-7

  • Danger Installation by electricians only

Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F – 92506 Rueil Malmaison Cedex
www.se.com

© 2021 Schneider Electric – All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Schneider Electric User Manuals

Related Manuals