TRISTAR ST-8917 Steam Press Light Instruction Manual
- June 10, 2024
- Tristar
Table of Contents
TRISTAR ST-8917 Steam Press Light
Product Information
The ST8917 / ST8918 is a steam generator iron manufactured by Tristar Europe B.V. The iron has an anti-lime filter that helps to prevent build-up of lime and other mineral deposits, which can affect the iron’s performance. The water reservoir of the iron should be filled with water before use. The iron also comes with ironing symbols to help users adapt the ironing temperature according to the fabric being ironed. The iron should be placed on a stable surface during use.
Product Usage Instructions
- Fill the water reservoir with water.
- Place the iron on a stable surface.
- Check the ironing symbols on your clothes to select the appropriate temperature.
- Press the steam button to release steam while ironing.
- When finished, turn off the iron and unplug it from the power outlet.
- Clean the anti-lime filter regularly to prevent build-up of lime and other mineral deposits.
- Clean the steam generator periodically as well.
For detailed instructions on cleaning and maintenance, please refer to the user manual provided with the product.
SAFETY
- By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
- The appliance must be placed on a stable, level surface.
- The user must not leave the device unattended while it is connected to the supply.
- This appliance is only to be used for household purposes and only for the purpose it is made for.
- This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
- To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
- Keep the appliance and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
- Do not left the iron unattended while it is connected to the mains supply.
- Do not use the iron when it’s dropped, if there are visible signs of damage or if it is leaking.
- Do not open the water tank during use.
- Make sure the iron will be used and rest on a stable surface.
- Remove the plug from the socket before the water reservoir will be filled with water.
- Surface is liable to get hot during use.
- When you place the iron on its stand, make sure the surface where the stand is placed is stable
Cleaning and maintenance
- Note: Before any maintenance or cleaning operations, please turn the temperature knob on minimum position, unplug your steam generator from the power socket and allow it to cool down completely.
Empty the boiler above a sink and rinse it a few times with clear water.
Anti-lime filter
- Depending on the frequency of use, the anti-lime filter needs to be replaced within 4 – 6 months. These filters are available on our service website.
Steam generator cleaning
- Clean the soleplate with a vinegar-water solution.
- Clean the base and iron with a damp cloth and dry it completely before storage.
- To not damage the soleplate, we advise you never put the soleplate on a metal surface.
- Clean your steam generator after every 10 times of use.
PARTS DESCRIPTION
- Steam cable
- Power cord with plug
- Power light
- Water tank empty indicator
- Base
- Anti-lime filter
- Thermostat knob
- Heating light
- Steam burst button
- Continuous steam button
- Soleplate
BEFORE THE FIRST USE
- Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
- Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz)
- Place your steam generator on a stable, horizontal heat-resistant surface.
- Never use the steam generator when water tank is empty, refill it before use it again.
- Always make sure the continuous steam button is in the off position before you will turn on the appliance. Only use the steam functions when the appliance is preheated otherwise the water will not evaporate and the appliance will leak water.
- Do not turn on the steam button when the iron is in the upright position to prevent the appliance from leaking.
USE
Fill the water tank
- Before filling the water tank, check if the steam generator is cooled down, if the power cable is unplugged and if the temperature knob is on its minimum position.
- Note: use a funnel to fill the boiler.
- Please read carefully our advices in chapter “type of water to use” concerning the water to use with your steam generator.
- Open the water tank, now you will be able to fill the water tank.
Select the temperature
- Place the iron on its base.
Select the desired temperature by using the thermostat knob, check the ironing symbols on your clothes in order to adapt the ironing temperature.
Steam ironing
- Note: For the first use, use the iron on an old piece of fabric to ensure the soleplate and water tank are completely clean.
- Fill the boiler and set the thermostat to at least the steam mark or higher.(Do not steam on a lower temperature as the water will not evaporate and will leak from the iron.)
- Plug the power cable into the wall outlet.
- Wait until the red indicator light goes out.
- For short steam bursts press the steam burst button, the machine will not steam continuous but emits bursts of steam.
- For continuous steaming you can use the continuous steam button.
- Note: The first time the steam generator is used, there may be some smoke and smell, this is not harmful. They will not affect the performance and will disappear rapidly.
After use
- Put the temperature knob on minimum position.
- Unplug the power cable.
- Wait until the steam generator and the soleplate are cooled down completely.
TIPS AND TRICKS
Type of water to use
You can use normal tap water to fill the tank. Therefore, especially if your
tap water is very hard, we advise you to mix it with distilled water or use
distilled water only.
We advise you to empty the water tank after use in order prevent limestone
inside the water tank.
Do not add anything to the contents of the boiler and do not use water from
clothes dryers, scented or softened water, water from refrigerators,
batteries, air conditioners and rain water. These contain organic waste or
mineral elements that become concentrated when heated and cause spitting,
brown staining or premature wear to the steam generator. Use of these types of
water will negate the guarantee provided with the product.
ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.
Support
You can find all available information and spare parts at
www.tristar.eu!
Tristar Europe B.V. | Jules Verneweg 87
5015 BH Tilburg | The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>