Amico Sidekick with RFID Reader Installation Guide
- June 10, 2024
- Amico
Table of Contents
Sidekick with RFID Reader
Product Information: Sidekick with RFID Reader
The Sidekick with RFID Reader is a device that can be easily
installed on a dual surface that has a textured top surface and
capacitive switch. It comes with a USB dongle and an RFID/WAVE ID
sticker that can be placed on the surface to indicate the location
of the RFID reader. The RFID reader is designed to read RFID tags
or stickers to provide secure access control.
Parts Supplied:
- RFID USB Dongle
- RFID/WAVE ID Sticker
Installation Tools (Optional):
- Small Screwdriver
- Needle Nose Pliers
Product Usage Instructions:
-
Locate the dual surface designated to be RFID upgraded. NOTE:
It has to have a textured top surface and capacitive switch to be
upgradable. -
Clear loose items off the top and then fold up the top
surface. -
Locate the RFID cover on the bottom of the gable on your
right. -
Remove the RFID cover. Optionally, use a small screwdriver to
gently pry it open. -
Plug the USB dongle into the USB socket.
-
Optionally, use needle nose pliers to hold the USB dongle.
-
Ensure the USB dongle is plugged in properly.
-
Put the cover back in place.
-
Make sure the cover is secured.
-
Flip the dual surface back down and place the RFID/ WAVE ID
sticker to indicate RFID reader location. -
Plug in and test.
For additional information or support, please contact Amico
Accessories Inc. at:
- Toll Free Tel: 1.877.264.2697
- Tel: 905.763.7778
- Fax: 905.763.8587
- Email: info@amico-accessories.com
Sidekick with RFID Reader
Quick Installation and Setup Instructions
Parts Supplied
RFID USB Dongle
RFID/WAVE ID Sticker
Instructions
1. Locate the dual surface designated to be RFID upgraded. NOTE: It has to
have a textured top surface and capacitive switch to be upgradable.
Installation Tools (Optional)
Small Screwdriver
Needle Nose Pliers
2. Clear loose items off the top and then fold up the top surface.
3. Locate the RFID cover on the bottom of the gable on your right.
4. Remove the RFID cover.
Optionally, use a small screwdriver to gently pry it open.
1
Sidekick with RFID Reader
Quick Installation and Setup Instructions
5. Plug the USB dongle into the USB socket.
6. Optionally, use needle nose pliers to hold the USB dongle.
7. Ensure the USB dongle is plugged in properly.
8. Put the cover back in place.
9. Make sure the cover is secured.
10. Flip the dual surface back down and place the RFID/ WAVE ID sticker to
indicate RFID reader location.
Plug in and test.
Amico Accessories Inc. | 85 Fulton Way, Richmond Hill, ON L4B 2N4, Canada | www.amico.com
Toll Free Tel: 1.877.264.2697 | Tel: 905.763.7778 | Fax: 905.763.8587 | Email: info@amico-accessories.com
AA-QG-SIDEKICK-WITH-RFID-READER 10.09.2014
2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>