standivarius AVE Wireless Ergonomic Mouse User Manual

standivarius AVE Wireless Ergonomic Mouse

The Standivarius AVE is a wireless ergonomic mouse designed to provide users with maximum comfort and ease of use. The mouse features a left-click button, scroll wheel, right-click button, DPI indicator light, DPI cycle button, backward and forward buttons, and a power ON/OFF button.

Product Features and Specifications

• Wireless connectivity with a 10m range
• Three DPI levels (800/1200/1600)
• Ergonomic design for maximum comfort
• Easy-to-use buttons for efficient navigation
• Includes Nano receiver for plug-and-play setup

Product Usage Instructions

1. Insert an AA battery in the compartment with polarity as indicated.
2. Remove the Nano receiver from the base of the mouse.
3. Plug the Nano receiver into a USB port on your computer.
4. Move the switches on the base of the mouse to ‘ON’ and’1′.
5. The AVE mouse can now be used within a 10m range of the Nano receiver.
6. If you are on the move, remove the Nano receiver from your computer and store it in the base of the mouse. Move the switch on the underside of the mouse from ‘ON’ to ‘OFF’.
7. If you lose connection, follow these steps:
   • Move the switch on the base to ‘OFF’.
   • Remove the Nano receiver from your computer and reinsert it.
   • Check that the switch on the base of the mouse is set to ‘1’.
   • Hold down the right-click and left-click buttons as you move the switch on the base to ‘ON’.
   • Release the right-click and left-click buttons after 3 seconds to rebuild the connection.
8. To adjust the DPI setting, press the DPI cycle button. The indicator light will flash once after shifting the DPI to the first level, twice after shifting the DPI to the second level, and so on.
9. Caution: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to local regulations.

OVERVIEW

Features/specification

• Vertical mouse with neutral ‘handshake’ position
• Textured grip and rubber scroll wheel
• 6 button design: left, right, scroll and click, fwd, bwd, DPI
• 2 .4GHz with USB Nano receiver
• Plug and play – No drivers required
• Optical tracking with DPI: 800/1200/1600
• Working Voltage: 5V
• Polling rate: 125Hz
• Working Current: 500mA

How to use

• Insert AA battery in the compartment with polarity as indicated.
• Remove Nano receiver from base of mouse.
• Plug Nano receiver into USB port on the computer.
• Move switches on base of mouse to ‘ON’ and ‘1.

AVE mouse can now be used within a 10m range of the Nano receiver.

On the move?

• Remove Nano receiver from computer and store in base of the mouse. Move switch on the underside of mouse from ‘ON’ to ‘OFF’.

Lost connection?

• Move switch on base to ‘OFF
• Remove Nano receiver from the computer and reinsert.
• Check switch on base of mouse is on 1.
• Hold Right-click and Left-click buttons down as you move the switch on base to ‘ON’.
• Release Right-click and Left-click buttons after 3 seconds to rebuild the connection.

DPI setting

• The indicator light will flash once after shifting the DPI to the first level, twice after shifting the DPI to the second level, etc. 3 levels 800/1200/1600 in total.

Caution: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to local regulations.

• standivarius.com/v-i

References

• standivarius.com/v-i

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>