CITIZEN EG 051x EN B Abbreviated Watch Instructions

051x Abbreviated instruction

• To see details of specifications and operations, refer to the instruction manual: 051x instruction manual

Component identification

1. Minute hand
2. Button B
3. Crown
4. Date indication
5. Button A
6. Chronograph second hand
7. Second hand
8. Chronograph hour hand
9. Hour hand
10. Chronograph minute hand

Crown’s position

1. Crown
2. Button A
3. Minute hand
4. Second hand
5. Date indication
6. Chronograph hour hand
7. Chronograph second hand
8. Chronograph minute hand
9. Hour hand
10. Button B

• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
• Refer also to our web page for detail of usage of the scale and bezel on the watch.
  (http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf)

Setting the time

1. Pull the crown out to position 2 when the small second hand points 0 second.

2. Rotate the crown to set the time.
   • Move the hands 4 or 5 minutes forward and move them back to the right time to set the time more precisely.
   • Change of date indication shows it just became AM. Take care the time set is AM or PM.

3. Push the crown in to position 0 in accordance with a reliable time source to finish the procedure.
   The small second hand starts moving.

Setting the date indication

• Do not adjust the date indication while the watch shows 9:00 PM 1:00 AM. Otherwise, the date indication may change incorrectly thereafter.
• Date indication adjustment is required on the first days of March, May, July, October and December.

1. Pull the crown out to position 1.
2. Rotate the crown to adjust the date indication.
3. Push the crown in to position 0 to finish the procedure.

Using the chronograph

• Measuring up to 12 hours in 1 second increments.

1. Push the crown in to position 0.
2. Press and release the button B.
   The chronograph starts moving.

Start/stop: press button B.
Reset: press button A while the chronograph is stopped.

• Be sure to reset chronograph after finishing measurement.

Adjusting the 0 position of the chronograph hands

Follow the steps below when the chronograph hands (chronograph hour/ minute/second hands) do not return to the 0 position even after resetting the chronograph.

1. Pull the crown out to position 2.

2. Press and release the button B repeatedly to adjust the chronograph second hand to the 0 position (12 o’clock position).
   • Pressing and holding the button moves the hand continuously.

3. Press and release the button A.
   The chronograph minute and hour hands return to the 0 position.

4. Set the time and push the crown in to position 0.

Documents / Resources

| CITIZEN EG 051x EN B Abbreviated Watch [pdf] Instructions
EG 051x EN B Abbreviated Watch, Abbreviated Watch, Watch
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>